ORALNER 3-Piece Patio Furniture Set Instruction Manual

Introduction

Thank you for choosing the ORALNER 3-Piece Patio Furniture Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor conversation set. Please read these instructions carefully before assembly and retain them for future reference.

Important Safety Information

For your safety and to prevent damage to the product, please adhere to the following guidelines:

• Always follow the provided installation instructions to ensure the furniture is assembled correctly and safely.
• Do not fully tighten screws until all components are aligned. This prevents misalignment and potential damage.
• Be aware of the weight capacities of the chairs and table to prevent accidents. Each chair has a weight capacity of 400 lbs.
• Keep the furniture in a stable and secure location to minimize tip-over risks.
• Ensure all connections are secure before use. Periodically check and retighten fasteners as needed.
• Do not stand on the furniture.
• Keep children away from the assembly area. Small parts can be a choking hazard.

Product Components

Your ORALNER 3-Piece Patio Furniture Set includes the following items:

• 2 x Wicker Chairs
• 2 x Seat Cushions
• 2 x Back Cushions
• 1 x Coffee Table with Tempered Glass Top
• 1 x Instruction Manual
• Necessary Assembly Tools

Image: All components included in the ORALNER 3-Piece Patio Furniture Set, laid out for inspection.

Assembly Instructions

Assembly of your ORALNER patio furniture set is designed to be straightforward. Please follow these steps carefully:

1. Unpack all components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify that all listed components are present.
2. Initial Fastening: Begin assembling each piece (chairs and table) by loosely attaching all screws. Do not fully tighten any screws until all components are correctly aligned and all screws are in place. This allows for minor adjustments during assembly.
3. Final Tightening: Once all parts are aligned and screws are inserted, gradually tighten all screws securely. Ensure all connections are firm and stable.
4. Attach Cushions: Place the seat and back cushions onto the chairs.
5. Place Glass Tabletop: Carefully place the tempered glass tabletop onto the coffee table frame. Ensure it is seated securely.

Image: Visual guide for assembly, emphasizing the importance of loosely tightening screws initially and then fully tightening them.

Usage Guidelines

This ORALNER patio furniture set is designed for outdoor use, providing a comfortable and stylish seating area. It is suitable for various outdoor spaces such as sunrooms, front porches, yards, balconies, poolsides, and gardens.

• Seating: The chairs are designed for comfortable seating. Ensure the weight limit of 400 lbs per chair is not exceeded.
• Coffee Table: Use the tempered glass coffee table for placing drinks, snacks, or decorative items. Avoid placing excessively hot items directly on the glass without protection.
• Placement: Position the furniture on a flat, stable surface to prevent wobbling or tipping.

Image: The ORALNER patio set arranged in an outdoor garden, showcasing its intended use.

Care and Maintenance

Proper care will extend the life and appearance of your ORALNER patio furniture set:

• Cleaning Wicker: The PE wicker is designed for all-weather durability. Clean the wicker frames with a dry cloth. For more stubborn dirt, use a mild soap solution and a soft brush, then rinse with water and dry thoroughly.
• Cushion Care: The cushion covers are made of polyester fabric and are slightly splash-resistant. They feature zippers for easy removal and cleaning. Machine wash covers on a gentle cycle with cold water and mild detergent, then air dry. Do not bleach or iron.
• Glass Tabletop: Clean the tempered glass tabletop with a glass cleaner and a soft cloth. Avoid abrasive cleaners or scouring pads that could scratch the surface.
• Seasonal Storage: During harsh weather conditions or off-season, it is recommended to store cushions indoors and cover the furniture to protect it from extreme elements.
• Fastener Check: Periodically inspect all bolts and connections to ensure they remain tight. Retighten as necessary to maintain stability.

Image: Detail highlighting the water-resistant fabric and removable, washable covers of the cushions, simplifying maintenance.

Troubleshooting

If you encounter any issues during or after assembly, please refer to the following common solutions:

• Misaligned Screw Holes: If screw holes do not align, ensure that no screws have been fully tightened prematurely. Loosen all screws on the affected component, adjust the parts to align the holes, then re-insert and loosely fasten all screws before tightening them gradually.
• Wobbly Furniture: Check that all screws are fully tightened. Ensure the furniture is placed on a flat, even surface. If the surface is uneven, consider using furniture levelers or shims.
• Damaged or Missing Parts: If any parts are damaged or missing upon arrival, please contact customer support immediately for assistance.

Product Specifications

Warranty and Customer Support

Your ORALNER 3-Piece Patio Furniture Set comes with a 30-day easy return policy. For any questions, concerns, or assistance with assembly or parts, please contact our customer support team.

Customer Support: Refer to your purchase documentation or the retailer's website for specific contact information for harmony-furniture, the seller of this product.

Please have your model number (HR-687667-HW) and purchase date ready when contacting support.