HAARAY Solar Outdoor Lights

1. Safety Information

Please read all instructions carefully before installation and use. Keep this manual for future reference.

• Do not disassemble or modify the product. Unauthorized modifications may cause damage or injury.
• Ensure the solar panel receives direct sunlight for optimal charging. Avoid shaded areas.
• Keep the light away from fire or extreme heat sources.
• The product is IP65 waterproof, designed to withstand rain and splashes, but do not immerse it in water.
• Handle the stakes and mounting hardware with care to prevent injury.

2. Product Overview

The HAARAY Solar Outdoor Lights provide powerful and versatile illumination for various outdoor spaces. Featuring a 2500LM brightness, 1800 PIR motion sensor, and 3600 wide-angle illumination, these lights are designed for security, pathway, and garden lighting. They can be installed in-ground or wall-mounted.

Figure 2.1: HAARAY Solar Outdoor Lights (2-Pack)

Key Features:

• 1800 PIR Motion Detection: Equipped with two PIR motion sensors for enhanced sensitivity, detecting movement of people, animals, and vehicles. Automatically turns off after 25 seconds of no motion.
• 3600 Wide Angle Illumination: Adjustable LED panels on both sides allow for a broad illumination range.
• Easy Installation: Offers flexible in-ground or wall-mount options with adjustable mounting heights.
• IP65 Waterproof: Constructed with high-quality ABS housing and IP65-certified sealing for resistance against extreme weather conditions.
• 3 Versatile Lighting Modes: Adaptable lighting for various security and aesthetic needs.

What's in the Box:

• HAARAY Solar Outdoor Lights (2 units)
• Mounting Hardware (screws, wall anchors)
• Ground Stakes
• Instruction Manual

3. Setup and Installation

3.1 Initial Charging

Before first use, ensure the solar light is placed in direct sunlight for 6-8 hours to allow the internal battery to fully charge. The solar panel is adjustable to maximize sun exposure.

Figure 3.1: Daytime Charging and Dusk Illumination

3.2 Installation Options

The HAARAY Solar Outdoor Lights offer two primary installation methods:

Wall Mount Installation:

1. Choose a location on a wall or fence that receives ample direct sunlight.
2. Use the provided mounting hardware (screws and wall anchors) to secure the bracket to the desired surface.
3. Attach the solar light unit to the secured bracket.

Figure 3.2: Wall Mount Diagram and Hardware

In-Ground Installation:

1. Assemble the ground stake by connecting the two sections.
2. Attach the solar light unit to the top of the assembled ground stake.
3. Insert the stake firmly into the ground in a location with direct sunlight. The adjustable height allows for varied terrains.

Figure 3.3: Ground Stake Assembly and Installation

3.3 Adjusting Illumination Angle

The side LED panels can be adjusted up to 3600 to direct light precisely where needed, maximizing coverage for your outdoor space.

Figure 3.4: 3600 Wide Angle Illumination Adjustment

4. Operating Instructions

4.1 Power On/Off and Mode Selection

Locate the power button on the light unit. Press the button to cycle through the three available lighting modes:

• Mode 1 (Energy-saving Mode): The light remains OFF until motion is detected. When motion is detected, it illuminates at 100% brightness for 25 seconds, then turns OFF again. This mode is ideal for security and deterring unwanted visitors.
• Mode 2 (Always On Mode): The light stays ON at a constant brightness throughout the night, regardless of motion detection.
• Mode 3 (Dim-Bright-Dim Mode): The light stays ON at a dim brightness (e.g., 10-30%) throughout the night. When motion is detected, it brightens to 100% for 25 seconds, then returns to dim mode.

Figure 4.1: Lighting Modes Explained

4.2 Motion Sensor Operation

The integrated PIR motion sensors detect movement within a 1800 angle and up to 40 feet detection range. For optimal performance, ensure the sensor is not obstructed by foliage or other objects.

Figure 4.2: PIR Motion Sensor Detection Range

5. Maintenance

To ensure the longevity and optimal performance of your HAARAY Solar Outdoor Lights, follow these maintenance tips:

• Clean the Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures efficient charging.
• Clear Obstructions: Periodically check that no leaves, branches, or other objects are blocking the solar panel or the motion sensor.
• Seasonal Adjustment: In winter or cloudy seasons, ensure the solar panel is positioned to receive maximum available sunlight.
• Weather Resistance: While IP65 waterproof, prolonged exposure to extreme conditions like heavy snow accumulation on the solar panel may temporarily affect charging efficiency. Clear snow as needed.

Figure 5.1: IP65 Waterproof Rating

6. Troubleshooting

If you encounter issues with your solar light, try the following solutions:

If troubleshooting steps do not resolve the issue, please contact HAARAY customer support.

7. Specifications

8. Warranty and Support

HAARAY strives to provide high-quality products and excellent customer care. If you experience any quality issues with your solar flood light, please contact our customer care team.

• Warranty: The product comes with an 18-month extended warranty.
• Customer Support: 24-hour customer support is available.
• Email: HAARAY-US@hotmail.com

Thank you for choosing HAARAY Solar Outdoor Lights.