AINAVI 10.25 inch Touch Screen Wireless CarPlay for BMW X5 X6 CCC E70 E71 (2007-2010)

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AINAVI 10.25 inch Touch Screen Wireless CarPlay system, designed specifically for BMW X5 X6 CCC E70 E71 models from 2007-2010. Please read this manual thoroughly before installation and use to ensure proper functionality and to maximize your experience.

This unit upgrades your original display while retaining all original car features, including iDrive Knob control, Bluetooth, Radio, OEM rear camera, Radar, and steering wheel controls. It integrates Wireless CarPlay and Wired Android Auto for enhanced connectivity.

2. Compatibility

This product is exclusively designed for BMW X5 E70 and X6 E71 models manufactured between 2007 and 2010, specifically those equipped with the CCC System and a 10 Pin LVDS connector. It is crucial to verify your vehicle's system type before purchase and installation.

Important Note: This unit is not compatible with CIC systems (4-Pin LVDS) or NBT systems (6-Pin LVDS).

Additionally, your car must have the original Audio AUX function. If your car does not have Audio AUX, this device is not compatible.

3. Package Contents

Upon opening the package, please verify that all components are present and undamaged:

• 10.25" Head Unit for BMW X5 X6 CCC System
• ISO Wiring Harness Cable
• Audio Extension Cable
• USB Cable
• Installation Instruction Manual (this document)

4. Setup and Installation

Installation of this unit requires technical knowledge and careful handling. It is recommended to seek professional assistance if you are not confident in performing the installation yourself. Always disconnect the car battery before beginning any electrical work.

4.1 Wiring Diagram

Refer to the following diagram for proper wiring connections:

Key Connections:

• ISO Wiring Harness (1, 2): Connects to the vehicle's main power and speaker harness.
• 360-DET (3): For 360-degree camera detection (if applicable).
• CAM-PWR, Back-up Camera Power Cable (4): Provides power for the backup camera.
• 5V- OUT (5): 5V power output.
• GND (6): Ground connection.
• CCD-CVBS, Back-up Camera Input (7): Video input for the backup camera (supports AHD 720P).
• DVR-CVBS, DVR Camera Input (8): Video input for a DVR camera.
• ACC-OUT (9): Accessory power output.
• AUX-OUT (10): Audio auxiliary output.
• USB2 U Disk (11): USB port for U-disk/media storage.
• USB1 Carplay (12): USB port for wired CarPlay/Android Auto connection.
• LVDS Port (13): Connects to the vehicle's original LVDS cable.

4.2 Physical Installation Steps (General Guide)

1. Carefully remove the original car display and trim panels.
2. Disconnect the original LVDS cable and other connectors from the factory display.
3. Connect the provided ISO wiring harness to the vehicle's harness.
4. Connect the new head unit's LVDS port to the vehicle's original LVDS cable.
5. Connect the USB and audio extension cables as needed.
6. Route all cables neatly and securely.
7. Mount the new 10.25-inch head unit into the dashboard opening.
8. Reinstall trim panels and test the system before fully securing.

For detailed, step-by-step installation instructions specific to your BMW model, please refer to the included installation guide or contact technical support.

5. Operating Instructions

5.1 Basic Operation

The 10.25-inch QLED display features a touch screen interface for intuitive control. You can also utilize the original iDrive knob and steering wheel controls for navigation within the system.

5.2 System Switching

The unit operates with a dual-system functionality, allowing seamless switching between the original BMW CCC system and the new Linux-based system with CarPlay/Android Auto. This ensures all original car features are retained.

5.3 Wireless CarPlay & Wired Android Auto

The system supports both wireless Apple CarPlay and wired Android Auto, providing access to your smartphone's navigation, communication, and entertainment features.

• Wireless CarPlay: Connect your iPhone via Bluetooth to enable wireless CarPlay.
• Wired Android Auto: Connect your Android phone via the USB cable to activate Android Auto.

Once connected, you can use GPS navigation, make calls, send/receive messages, and stream music directly from your phone through the head unit.

5.4 Retained Original Features

This head unit is designed to seamlessly integrate with and retain the functionality of your original BMW system components:

• iDrive System: Full functionality of the iDrive knob is retained.
• Amplifier System: Original amplifier system remains functional.
• Original Car Information Display: Vehicle speed, fuel level, oil pressure, and safety warnings are displayed on the new screen.
• Factory Rear View Camera: Supports the original OEM backup camera.
• Steering Wheel Control Function: All steering wheel controls remain active.
• Original CD Player: The factory CD player functionality is retained.
• Original Radio: The original radio tuner is still accessible.
• Original Bluetooth: The factory Bluetooth system is retained.

6. Specifications

7. Troubleshooting

If you encounter issues with your AINAVI head unit, please refer to the following common troubleshooting steps:

• No Power / Unit Not Turning On:
  • Check all power connections, especially the ISO wiring harness.
  • Ensure the car battery is properly connected and charged.
  • Verify the vehicle's fuse for the stereo system is intact.
• No Sound:
  • Confirm the Audio AUX input is selected on your original BMW system. This unit outputs audio through the AUX channel.
  • Check the audio extension cable connection.
  • Ensure volume levels are not muted on both the head unit and the original car system.
• CarPlay/Android Auto Not Connecting:
  • For Wireless CarPlay, ensure Bluetooth is enabled on your iPhone and paired with the head unit.
  • For Wired Android Auto, ensure your phone is connected to the correct USB port (USB1 Carplay) with a quality USB cable.
  • Restart your smartphone and the head unit.
  • Check for any software updates for your phone's operating system.
• Touch Screen Unresponsive / Freezing:
  • Perform a soft reset of the unit (refer to the specific reset procedure if available, or disconnect power for a few minutes).
  • Ensure the screen is clean and free of debris.
• Original Features Not Working (e.g., iDrive, Steering Wheel Controls):
  • Verify all wiring harness connections are secure and correctly seated.
  • Ensure the LVDS cable is properly connected.

If the issue persists after attempting these steps, please contact AINAVI technical support for further assistance.

8. Maintenance

To ensure the longevity and optimal performance of your AINAVI head unit, follow these maintenance guidelines:

• Cleaning: Use a soft, dry, lint-free cloth to clean the screen and exterior. For stubborn smudges, lightly dampen the cloth with water or a screen-safe cleaner. Avoid abrasive materials or harsh chemicals.
• Temperature: Avoid exposing the unit to extreme temperatures, both hot and cold, for extended periods.
• Moisture: Keep the unit dry. Do not expose it to water or excessive humidity.
• Software Updates: Periodically check the manufacturer's website or contact support for any available software or firmware updates to improve performance and add new features.

9. Warranty and Support

AINAVI provides technical support for installation and operation of this product. If you require assistance, please reach out to our customer support team.

9.1 Contacting Technical Support

For installation technical support or any questions, you can contact the seller directly through the platform where you purchased the product. Provide pictures or videos of your specific issue to help our engineers assist you more effectively.

You may also reach out via the following methods:

• Hotline: +1 (833) 858-5016
• Working Hours: 3:00 PM to 12:00 PM PST
• Email: info [at] ainavi [dot] com

9.2 Warranty Information

Specific warranty terms and conditions are typically provided with your purchase documentation. Please retain your proof of purchase for warranty claims. For detailed warranty information, please contact AINAVI customer support.