Bburago 18-36820_18-36844L

Download PDF
Contents

Bburago 1:43 Ferrari SF-24 (2024) Die-Cast Model Car Instruction Manual

Model: 18-36820_18-36844L

1. Introduction

This instruction manual provides essential information for the Bburago 1:43 Ferrari SF-24 (2024) Die-Cast Model Car. It covers product overview, setup, operation, maintenance, troubleshooting, and specifications to ensure proper handling and enjoyment of your model.

The Bburago 1:43 Ferrari SF-24 is a highly detailed, true-to-scale replica of the 2024 Ferrari Formula 1 car. It features a die-cast metal body with plastic parts, making it suitable for display and light handling.

2. Safety Information

WARNING: CHOKING HAZARD - Small Parts. This product contains small parts and is not suitable for children under 3 years of age. The manufacturer recommended age for this model is 14 years and up due to its collectible nature and intricate details.

Keep the model away from infants and young children to prevent accidental ingestion of small components.

3. Product Overview

The Bburago 1:43 Ferrari SF-24 (2024) is a meticulously crafted die-cast model, designed to replicate the iconic Formula 1 car with high precision. It is an officially licensed product by Maisto International, ensuring authenticity and quality.

Bburago 1:43 Ferrari SF-24 (2024) Die-Cast Model Car, front three-quarter view

Figure 3.1: Front three-quarter view of the Bburago 1:43 Ferrari SF-24 die-cast model car.

Key Features:

  • Collectible Quality: True-to-scale detailed vehicle.
  • Material: Die-cast metal body with durable plastic parts.
  • Authenticity: Officially licensed product by Maisto International.
  • Precision: Highly-detailed precision model suitable for display or play.
Maisto Formula Diecast Size Comparison showing 1:43, 1:24, and 1:18 scales

Figure 3.2: Size comparison chart for Maisto Formula die-cast models, illustrating the 1:43 scale alongside 1:24 and 1:18 scales. The 1:43 scale model is approximately 4 inches (10 cm) long and 1.5 inches (3.8 cm) wide.

4. Setup

4.1 Unboxing

  1. Carefully remove the model car from its packaging. The model is typically secured with plastic ties or a clear plastic casing.
  2. Retain the packaging for future storage or transport, if desired.
  3. Inspect the model for any visible damage or missing parts.

4.2 Placement

Place the model on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity. Avoid areas where it might be easily knocked over or exposed to dust.

5. Operating the Model

This Bburago die-cast model is primarily a display item. While it is durable for light play, it does not feature remote control capabilities or complex moving parts beyond basic wheel rotation.

5.1 Handling

  • Handle the model by its main body to avoid damaging delicate components such as wings, mirrors, or antennas.
  • Avoid applying excessive force to any part of the model.
  • The wheels are designed to roll smoothly. You can gently push the car to observe its movement.
Front view of the Bburago 1:43 Ferrari SF-24 (2024) Die-Cast Model Car

Figure 5.1: Front view highlighting the detailed aerodynamic elements of the Ferrari SF-24 model.

Rear view of the Bburago 1:43 Ferrari SF-24 (2024) Die-Cast Model Car

Figure 5.2: Rear view showcasing the intricate diffuser and rear wing details of the Ferrari SF-24 model.

6. Maintenance

6.1 Cleaning

  • To clean the model, gently wipe it with a soft, dry, lint-free cloth.
  • For stubborn dust, a soft brush (like a clean makeup brush or a soft paintbrush) can be used to reach crevices.
  • Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the paint finish or plastic components.
  • Do not immerse the model in water.

6.2 Storage

Store the model in a cool, dry place, away from direct sunlight and extreme temperature fluctuations. If possible, keep it in its original packaging or a display case to protect it from dust and accidental damage.

7. Troubleshooting

As a static display model, the Bburago Ferrari SF-24 has limited functional components. Most issues relate to physical damage.

ProblemPossible CauseSolution
Loose or Detached PartAccidental impact or rough handling.For minor detachments, a small amount of model-safe adhesive may be used. For significant damage, contact the manufacturer or a specialized model repair service.
Scratches or Paint ChipsAbrasion during handling or cleaning.Minor scratches may be polished with specialized model polishing compounds. Paint chips are generally permanent and may require professional touch-up if desired.
Wheels Not Rolling SmoothlyDust or debris in the axle, or bent axle.Gently clean around the axles with a soft brush. If the axle is bent, avoid forcing it; this may require professional repair.

8. Specifications

FeatureDetail
Model NameFerrari SF-24 (2024)
BrandBburago
ManufacturerMaisto
Scale1:43
Model Number18-36820_18-36844L
Product Dimensions (L x W x H)Approximately 5.47 x 2.63 x 2.76 inches (13.9 x 6.7 x 7 cm)
Item Weight2.82 ounces (80 grams)
MaterialDie-cast metal body with plastic parts
Recommended Age14 years and up

9. Warranty and Support

Specific warranty information for the Bburago 1:43 Ferrari SF-24 (2024) Die-Cast Model Car is not provided in the product details. For any inquiries regarding warranty or product support, please refer to the retailer where the product was purchased or contact Maisto International directly, as they are the manufacturer of this officially licensed model.

You may find contact information for Maisto International on their official website or through the product packaging.

© 2024 Bburago / Maisto International. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.