1. Introduction
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Haworth Breck Office Chair. Please read these instructions carefully before using the chair to ensure proper function and longevity.
The Haworth Breck Office Chair is designed for ergonomic comfort and support, featuring a three-zoned GeoStretch system, customizable lumbar support, 4D arm adjustability, and adaptive seat depth. It is constructed with sustainability in mind, utilizing recycled and recyclable materials.
2. Safety Information
Always read and follow the assembly instructions carefully. Keep the chair on a stable surface and do not exceed the maximum weight capacity. Do not use the chair if any parts are damaged or missing. Keep the chair away from heat sources and sharp objects to prevent damage to the materials.
3. Setup and Assembly
The Haworth Breck Office Chair is designed for quick and easy assembly, typically requiring less than a minute with its four-part construction. Follow the instructions provided in the packaging for detailed steps.

Figure 3.1: Haworth Breck Chair components ready for assembly.
Assembly Steps:
- Unpack all components from the box. Verify all four main parts are present.
- Insert the gas lift cylinder into the center hole of the chair base.
- Place the seat assembly onto the gas lift cylinder.
- Attach the backrest to the seat assembly according to the provided instructions.
- Ensure all connections are secure before use.
4. Operating Your Chair
Your Breck Office Chair offers multiple adjustments to customize your seating experience for optimal comfort and ergonomic support.

Figure 4.1: Key adjustment points on the Breck Office Chair.
Adjustments:
- Three-Zoned GeoStretch System: The chair features a responsive, weight-activated recline mechanism. Use the lever to engage a 3-position backstop, allowing you to sit upright or control your recline range for personalized comfort.
- Customizable Lumbar Support: The standard height-adjustable lumbar feature allows you to fine-tune lower back support. Locate the adjustment mechanism on the backrest to raise or lower the lumbar pad to match your posture and preferences.
- 4D Arm Adjustability: The armrests can be adjusted in four dimensions: vertically (up/down), horizontally (in/out), forward/backward, and they can pivot inward/outward. This provides dynamic support for your neck, shoulders, and arms. Use the buttons or levers located on the armrests to make these adjustments.
- Height-Adjustable Seat: Use the lever located under the seat to easily raise or lower the seat height. Adjust it to align with your desk height and ensure your feet are flat on the floor for optimal ergonomic alignment.
- Adaptive Seat Depth: Slide the seat forward or backward (over 2 inches of range) to support your thighs and reduce pressure behind the knees. This adjustment is ideal for all-day comfort and accommodating different leg lengths.
Demonstration Video:
Video 4.1: Demonstrating the dynamic movements and adjustments of the Haworth Breck Office Chair.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Haworth Breck Office Chair.
Cleaning Instructions:
- Textile Surfaces: For general cleaning, vacuum fabric surfaces regularly to remove dust and loose particles. For spills, blot immediately with a clean, dry cloth. For deeper cleaning, use a mild soap solution and a damp cloth, then wipe dry. Avoid harsh chemicals.
- Plastic and Metal Parts: Wipe down plastic and metal components with a soft, damp cloth and a mild cleaner. Avoid abrasive cleaners that may scratch the surface.
- Casters: Periodically check casters for accumulated hair or debris and clean as necessary to ensure smooth movement.
General Care:
- Avoid exposing the chair to direct sunlight for prolonged periods to prevent fading of materials.
- Do not use the chair as a step stool or stand on it.
- Ensure all screws and connections remain tight. Periodically check and tighten if necessary.
6. Troubleshooting
If you encounter any issues with your Haworth Breck Office Chair, refer to the following common troubleshooting tips:
Common Issues:
- Chair not adjusting height: Ensure the height adjustment lever is fully engaged. If the gas lift is unresponsive, it may require replacement.
- Recline is too stiff or too loose: Check the tension knob, usually located under the seat. Turn it clockwise to increase tension (stiffer recline) or counter-clockwise to decrease tension (looser recline).
- Armrests are loose or not holding position: Verify that the armrest locking mechanisms are engaged. If the issue persists, check for any loose screws and tighten them.
- Casters not rolling smoothly: Inspect casters for debris (hair, lint) and clean them thoroughly. Ensure the floor surface is appropriate for the caster type.
- Squeaking noises: Apply a small amount of silicone-based lubricant to moving parts or pivot points. Avoid oil-based lubricants on plastic components.
If these steps do not resolve the issue, please contact customer support.
7. Specifications
Detailed specifications for the Haworth Breck Office Chair (Lagoon, White Trim variant):
Figure 7.1: Haworth Breck Office Chair Dimensions.
| Feature | Detail |
|---|---|
| Brand | Haworth |
| Model | Breck |
| Color | Lagoon |
| Style Name | White Trim |
| Material | Textile (Seat), Foam (Fill) |
| Product Dimensions (D x W x H) | 28.5"D x 28.5"W x 39"H |
| Seat Depth | Adjustable over 2 inches |
| Additional Features | Ergonomic, Height-Adjustable Lumbar Support, 4D Arm Adjustability, Adaptive Seat Depth, Three-Zoned GeoStretch System |
| Recommended Uses | Office |
| Required Assembly | Yes (4 parts, quick assembly) |
| Back Style | Continuous Back |
| Furniture Base Movement | Glide (Casters included) |
| Reclining Position Count | 3 |
| Sustainability | Made with 53% recycled materials and 94% recyclable components. GREENGUARD Gold Certified. |
8. Warranty and Support
Specific warranty details are not provided in this manual. For warranty information, please refer to the documentation included with your purchase or visit the official Haworth website.
Customer Support:
For further assistance, technical support, or to inquire about replacement parts, please contact Haworth customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's website.