Woowind NW10 Portable Electric Paddle Board Pump Instruction Manual

1. Introduction

Thank you for choosing the Woowind NW10 Portable Electric Paddle Board Pump. This device is designed for efficient inflation and deflation of various inflatable items, including stand-up paddle boards, kayaks, boats, air mattresses, and more. Please read this manual thoroughly before use to ensure safe and optimal operation.

What's in the Box:

• Woowind NW10 Electric Pump
• Air Hose
• 7 Air Nozzles (for universal compatibility)
• 12V DC Car Adapter Cable
• Type-C Charging Cable

Key Features:

• Rapid Inflation Technology: Utilizes advanced membrane technology for powerful airflow, achieving up to 20 PSI.
• Extended Runtime: Inflates multiple paddle boards on a single charge.
• Emergency Power Bank: Doubles as a power bank for charging phones/tablets via USB output.
• Smart Auto-Shutoff & Display: Automatically stops at the preset pressure and features an LED display for real-time pressure monitoring and a flashlight.
• Universal Compatibility: Includes 7 nozzles for various inflatable items.
• Multi-Device Modes: Optimized settings for SUP, kites, and customizable pressure modes.

Figure 1: Woowind NW10 pump and its accessories, including various nozzles, charging cables, and the air hose.

2. Safety Information

• Do not operate the pump in wet conditions or expose it to rain unless specified by its IP rating. The NW10 has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. However, avoid submerging the device.
• Keep the pump away from children and pets.
• Ensure the correct nozzle is used for your inflatable item to prevent damage or injury.
• Do not exceed the recommended pressure (PSI) for your inflatable item. The pump features an auto-shutoff function to prevent over-inflation.
• Avoid blocking the air inlets or outlets during operation.
• Do not leave the pump unattended while in use.
• If using the 12V DC car adapter, ensure your vehicle's engine is running to prevent draining the car battery.
• Store the pump in a cool, dry place when not in use.

3. Setup

3.1 Charging the Pump:

The Woowind NW10 pump can be charged using the provided Type-C cable or 12V DC car adapter. A full charge provides extended runtime for multiple inflations.

• Using Type-C Cable: Connect the Type-C charging cable to the pump's Type-C input port and to a compatible USB power source (e.g., wall adapter, power bank).
• Using 12V DC Car Adapter: Connect the 12V DC car adapter cable to the pump's DC input port and to your vehicle's 12V outlet. It is recommended to charge with the vehicle engine running.

Figure 2: The pump supports charging via 12V DC car adapter or Type-C cable.

3.2 Connecting the Air Hose and Nozzle:

1. Select the appropriate nozzle from the 7 provided adapters for your inflatable item's valve.
2. Attach the selected nozzle securely to the end of the air hose.
3. For inflation, connect the other end of the air hose to the 'IN' port on the pump. For deflation, connect it to the 'OUT' port.

Figure 3: The pump includes 7 different nozzles for universal compatibility with various inflatables.

4. Operating Instructions

4.1 Inflation:

1. Ensure the pump is charged or connected to a power source.
2. Connect the air hose to the 'IN' port of the pump and the appropriate nozzle to your inflatable item's valve.
3. Press the power button to turn on the pump. The LED display will activate.
4. Use the 'M' button to cycle through different modes (SUP, Kites, Lap, Custom) or use the '+' and '-' buttons to set your desired pressure (PSI).
5. Press the start button (often the power button again or a dedicated start button) to begin inflation. The pump will operate in two stages: a high-volume stage followed by a high-pressure stage.
6. The pump will automatically shut off once the preset pressure is reached.
7. Disconnect the hose from the inflatable item and the pump.

Figure 4: The Woowind NW10 pump in action, inflating a paddle board.

Figure 5: The pump's smart auto-shutoff ensures precise inflation to the desired pressure.

4.2 Deflation:

1. Connect the air hose to the 'OUT' port of the pump and the appropriate nozzle to your inflatable item's valve.
2. Press the power button to turn on the pump.
3. Press the start button to begin deflation. The pump will extract air from the item.
4. Once deflation is complete, turn off the pump and disconnect the hose.

Figure 6: The pump features integrated ports for both inflation and extraction.

4.3 Power Bank Function:

The pump includes a USB output port to charge external devices like smartphones or tablets during outdoor emergencies.

1. Connect your device's charging cable to the USB output port on the pump.
2. The pump will begin charging your device.

4.4 Flashlight Function:

The integrated flashlight can be activated for convenience in low-light conditions.

1. Press the flashlight button on the control panel to turn on the light.
2. Press again to cycle through different light modes (e.g., steady, flashing) or turn off.

5. Maintenance

• Cleaning: Wipe the exterior of the pump with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no sand or debris enters the air ports.
• Storage: Store the pump and all accessories in the provided carry bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Care: For optimal battery life, charge the pump fully before long-term storage and recharge every 3-6 months if not in regular use.

6. Troubleshooting

• Pump not turning on: Check if the battery is charged. If using the 12V DC adapter, ensure it is securely connected and the vehicle engine is running.
• Slow inflation/deflation: Ensure the air hose and nozzle are securely connected without leaks. Verify that the correct mode and pressure are selected.
• Pump stops unexpectedly: The auto-shutoff feature may have activated if the preset pressure was reached. Check for any blockages in the air inlets/outlets.
• Inaccurate pressure reading: Ensure the nozzle is fully inserted into the valve of the inflatable item.

7. Specifications

8. Warranty and Support

The Woowind NW10 Portable Electric Paddle Board Pump comes with a 2-Year Warranty.

For technical support, warranty claims, or any inquiries, please contact Woowind customer service through the retailer's platform or visit the official Woowind website for contact information.