MekedeTech M6MAX

MekedeTech M6 MAX Android Car Radio User Manual

Model: M6MAX

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MekedeTech M6 MAX Android Car Radio. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

Safety Information

Ensure professional installation to avoid damage to the vehicle or the unit.
Do not operate the device in a way that distracts you from driving.
Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
Refer all servicing to qualified personnel.

Setup and Installation

The MekedeTech M6 MAX is designed for universal 2-DIN installation. Due to its large 13-inch screen, careful consideration of your vehicle's dashboard layout is necessary. Professional installation is highly recommended.

Pre-Installation Check

Verify all components are present.
Ensure the vehicle's power is disconnected before starting installation.

Installation Steps (General)

Remove the existing car stereo and dashboard trim.
Connect the wiring harness, including power, ground, speaker wires, and accessory wires.
Connect the GPS antenna and 4G antenna.
Mount the M6 MAX unit into the 2-DIN slot.
Reconnect vehicle power and test functionality before reassembling the dashboard.

MekedeTech M6 MAX Android Car Radio installed in various car dashboards

Image: The MekedeTech M6 MAX Android Car Radio shown installed in different vehicle dashboards. Note that due to its large 13-inch screen size, the unit may partially cover air conditioning vents in some car models.

Operating Instructions

Power On/Off

The unit powers on automatically with the vehicle's ignition. To manually power off or restart, use the designated power button or software option on the screen.

Touch Screen Interface

Navigate the Android 12 system using the 13-inch QLED IPS touch screen. Swipe, tap, and pinch gestures are supported for intuitive control.

Wireless CarPlay / Android Auto

Connect your smartphone wirelessly for CarPlay or Android Auto functionality. This allows access to navigation, calls, messages, and music directly from your phone's interface on the car radio screen.

Bluetooth 5.1 Connectivity

Pair your mobile device via Bluetooth 5.1 for hands-free calling and audio streaming. Go to the Bluetooth settings on the unit to search for and connect to your device.

Voice Control

Utilize the built-in voice control feature for hands-free operation of various functions, enhancing driving safety and convenience. Compatible with Siri and other voice control applications.

Audio Settings (DSP & EQ)

Access the Digital Sound Processor (DSP) and 36-band Equalizer settings to customize your audio experience. Features include low-pass filter, tone compensation, balanced mode, surround sound mode, and DTS 4.1/5.1 channel surround system for enhanced sound quality.

Navigation and Internet

The unit supports 4G LTE and 5GHz WiFi for internet access and online navigation. Download maps and apps from the Google Play Store.

Camera Support

The system supports ADAS DVR front cameras and AHD rear cameras for enhanced driving assistance and safety.

Maintenance

Screen Cleaning: Use a soft, lint-free cloth to gently wipe the screen. Do not use abrasive cleaners or solvents.
Software Updates: Periodically check for and install software updates to ensure optimal performance and access to new features.
Cooling System: The unit features a built-in powerful cooling fan. Ensure no obstructions block the ventilation openings.

Troubleshooting

Problem	Possible Cause	Solution
Unit does not power on.	Incorrect wiring, blown fuse, vehicle power issue.	Check power connections and fuses. Consult a professional installer.
No sound.	Volume too low, incorrect audio settings, speaker wiring issue.	Increase volume. Check audio output settings and speaker connections.
Bluetooth connection issues.	Device not paired, Bluetooth off, interference.	Ensure Bluetooth is enabled on both devices. Re-pair the device. Move closer to the unit.
CarPlay/Android Auto not connecting.	Incorrect settings, phone compatibility, software glitch.	Verify phone compatibility. Check settings on both phone and head unit. Restart both devices.
Touch screen unresponsive.	Temporary software issue, screen damage.	Restart the unit. If issue persists, contact support.

Specifications

Feature	Detail
Model Number	M6MAX
Operating System	Android 12
CPU	UIS7862S 2.0GHz Octa-core (2x ARM Cortex A75 + 6x ARM Cortex A55)
Screen Size	13 inch
Display Resolution	1920x1200 QLED IPS
Memory (RAM+ROM)	4GB RAM + 64GB ROM (as per current variant)
Bluetooth	BT 5.1 (Qualcomm 3031 chip)
Connectivity	4G LTE, 5GHz WiFi, Wireless CarPlay, Wireless Android Auto
Power Amplifier IC	TDA7850/7851
Radio IC	TDA7708 (with RDS)
Audio Features	DSP, DTS 4.1/5.1 Channel Surround System, 36-Band EQ
Voice Command	Supported (Buttons, Keyboard, Microphone, Touchscreen)
Camera Support	ADAS DVR Front Camera, AHD Rear Camera
Cooling	Built-in powerful cooling fan
Antennas	Improved Fakra GPS Antenna, Fakra 4G Antenna
Output Wattage	50 Watts
Connector Type	RCA, USB

Warranty Information

The MekedeTech M6 MAX Android Car Radio comes with a 1 Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

Please retain your proof of purchase for warranty claims.

Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact MekedeTech customer support. Refer to the contact information provided with your purchase or visit the official MekedeTech website.

Note: Always consult with a qualified professional for complex installation or repair issues.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.