1. Introduction
Thank you for choosing VOLISUN 7-Inch Retaining Wall Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED hardscape lighting. These low voltage lights are designed for outdoor use, offering soft white illumination for various landscape applications.
Image 1.1: VOLISUN 7-inch retaining wall lights illuminating an outdoor landscape, including a fire pit area and stone walls.
2. Safety Information
Please read all instructions carefully before installation and use. Retain this manual for future reference.
- Electrical Safety: This product operates on 12V-24V AC/DC low voltage. A transformer is required and is not included. Ensure the transformer's output wattage is at least 20% higher than the total wattage of all connected lights. Consult a qualified electrician if you are unsure about electrical connections.
- Installation: Disconnect power at the source before installing or servicing the lights. Ensure all connections are secure and waterproof.
- Outdoor Use: These lights are designed for outdoor use with an IP65 waterproof rating. However, avoid submerging the lights in water.
- Handling: Do not attempt to disassemble or modify the light fixture beyond the cuttable stainless steel plate.
3. Package Contents
Each 12-pack of VOLISUN 7-Inch Retaining Wall Lights includes the following components:
- 12 x LED Light Fixtures with Cords
- Mounting Screws
- Waterproof Wire Nuts
- Wire Connectors
Note: A 12V-24V transformer and additional low voltage cable are required for operation and are not included in this package.
Image 3.1: The light fixture with its dimensions (6.8in L x 2.81in W x 0.69in H), a 5.9ft cord, mounting screws, and waterproof wire nuts.
4. Specifications
| Feature | Specification |
|---|---|
| Model Name | Retaining Wall Light (JXL-ST0703) |
| Brand | VOLISUN |
| Light Source Type | LED |
| Wattage | 3 Watts per light |
| Brightness | 330 Lumens per light |
| Light Color | 2700K Soft White |
| Beam Angle | 95° Downward |
| Voltage | 12V-24V AC/DC |
| Material | Aluminum, Stainless Steel |
| Water Resistance Level | IP65 Waterproof |
| Lifespan | 50,000 hours |
| Product Dimensions | 6.8"L x 2.81"W x 0.69"H |
| Certifications | ETL Certified |
Image 4.1: Detailed view of the light's output, highlighting 2700K soft white color, 330 lumens, and 95° downward beam angle.
Image 4.2: Exploded view illustrating the internal components and their contribution to the IP65 waterproof design, including alloy aluminum housing, high-precision plastic shell, IPX5-rated seals, high-precision thick plastic base, potting-sealed cable ports, and stainless steel mounting plate.
5. Installation Guide
The VOLISUN Retaining Wall Lights offer two primary installation methods: as a hardscape light or as a retaining wall light. Always ensure power is disconnected before beginning installation.
5.1 Pre-Installation Steps
- Transformer Selection: Choose a 12V-24V transformer with an output wattage at least 20% higher than the total wattage of all connected lights. For example, for eight 3-watt lights, a transformer with at least 28.8 watts (8 x 3 x 1.2) is needed.
- Cable Preparation: Ensure you have appropriate low voltage landscape lighting cable (not included) to connect the lights to the transformer.
- Plate Customization (Optional): The stainless steel mounting plate is cuttable. If a narrower width is required, carefully cut along the designated lines on the plate using appropriate tools.
Image 5.1: Guide for selecting the correct transformer wattage, emphasizing a 20% buffer over total light wattage.
Image 5.2: The cuttable stainless steel plate, allowing for width adjustment to fit specific installation needs.
5.2 Installation Modes
Refer to the diagram below for visual guidance on both installation methods.
Image 5.3: Step-by-step instructions for installing the lights as either a hardscape light (flush mount) or a retaining wall light (angled mount).
Method 1: Install as a Hardscape Light
- Drill pilot holes into the mounting surface according to the plate's screw positions.
- Secure the light fixture's stainless steel plate to the surface using the provided mounting screws.
- Connect the light's cord to your main power cord using the waterproof wire nuts/connectors. Ensure a tight, waterproof seal.
Method 2: Install as a Retaining Wall Light
- Drill pilot holes into the underside of the retaining wall cap or ledge.
- Attach the light fixture's stainless steel plate to the underside of the cap/ledge, allowing the light to project downwards.
- Connect the light's cord to your main power cord using the waterproof wire nuts/connectors. Ensure a tight, waterproof seal.
5.3 Wiring Connections
After mounting the lights, connect them to your low voltage landscape lighting system. Use the provided waterproof wire nuts to ensure secure and weather-resistant connections. Route cables discreetly and protect them from damage.
5.4 Installation Video Guide
Video 5.1: An official VOLISUN video demonstrating the features and installation process of the 7-inch hardscape lighting. This video provides a visual guide to the product's components, waterproof design, and mounting options.
6. Operation
Once properly installed and connected to a compatible 12V-24V low voltage transformer, the VOLISUN Retaining Wall Lights will operate automatically with your landscape lighting system. The lights are designed to provide a consistent 2700K soft white illumination when power is supplied.
- Power On/Off: Control the lights via the connected transformer or a timer/switch integrated into your landscape lighting system.
- Light Output: Each light provides 330 lumens of 2700K soft white light with a 95° downward beam angle, designed to reduce glare and highlight architectural features or pathways.
7. Maintenance
The VOLISUN Retaining Wall Lights are built for durability and require minimal maintenance.
- Cleaning: Periodically clean the light fixtures with a soft, damp cloth to remove dirt, dust, or debris that may accumulate and affect light output. Do not use harsh chemicals or abrasive cleaners.
- Inspection: Regularly inspect the wiring and connections for any signs of wear, damage, or loose connections. Ensure the waterproof seals remain intact.
- Obstructions: Keep the area around the lights clear of foliage or other obstructions that could block the light beam or trap moisture.
Image 7.1: The lights operating effectively during rainfall, showcasing their IP65 waterproof design.
8. Troubleshooting
If you encounter issues with your VOLISUN Retaining Wall Lights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on | No power to the transformer; Loose wiring connections; Faulty transformer; Damaged light fixture. | Check power supply to transformer; Verify all wire connections are secure; Test transformer output; Inspect light for visible damage. |
| Lights are dim or flickering | Insufficient power from transformer; Voltage drop due to long cable runs or thin wire; Loose connections; Dirt/debris on light lens. | Ensure transformer wattage meets requirements; Use appropriate gauge wire for cable length; Tighten all connections; Clean light lens. |
| Water inside the fixture | Improperly sealed wire connections; Damage to fixture housing. | Re-seal all wire connections with waterproof nuts/sealant; If fixture housing is damaged, contact customer service for replacement. |
9. Warranty and Customer Support
VOLISUN provides a 3-year warranty for this product, ensuring outstanding quality and safety. For any product inquiries, technical assistance, or warranty claims, please contact VOLISUN Customer Service.
You can reach VOLISUN Customer Service through the retailer where you purchased the product or by visiting the official VOLISUN website for contact information.
Image 9.1: VOLISUN's commitment to customer satisfaction, including professional after-sales support and a 3-year warranty.