1. Product Overview
The ZWP R7114S is a replacement remote control designed for specific ONN and BlackWeb soundbar models. It offers a comfortable hand feeling and is made from durable ABS material. This remote requires no programming and is ready for use once batteries are installed.
Image: Front view of the ZWP R7114S Replacement Remote Control, showcasing its ergonomic design and button layout.
Compatible Models:
- ONN ONA18SB002
- ONN ONB18SB001
- ONN ONA19SB003
- BlackWeb 2.1-Channel BWA18SB001
2. Setup Guide
2.1 Battery Installation
The ZWP R7114S remote control requires button batteries (not included). Follow these steps to install them:
- Locate the battery compartment on the back of the remote control.
- Open the battery compartment cover by sliding or pressing the latch.
- Insert the required button batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely until it clicks into place.
Image: Rear view of the remote control, illustrating the battery compartment and the type of button battery required (3V Lithium Battery).
2.2 Initial Use
This replacement remote control is designed for immediate use without any complex programming or pairing. Once the batteries are correctly installed, it is ready to operate your compatible soundbar.
Image: The remote control positioned next to a television, emphasizing that no programming or pairing is required for operation after battery insertion.
3. Operating Instructions
To operate your soundbar, point the remote control directly at the soundbar's infrared receiver and press the desired button. Ensure there are no obstructions between the remote and the soundbar.
3.1 Button Functions
Refer to the image below for a visual guide to the remote's buttons and their general functions:
Image: Close-up of the remote control's buttons, showing the layout and labels for various functions such as power, input selection, volume, and sound modes.
- Power Button (⏻): Turns the soundbar on or off.
- Mute Button (🔇): Mutes or unmutes the sound.
- Input Selection Buttons (AUX, OPTICAL, LINE IN, COAXIAL, Bluetooth): Selects the audio input source for the soundbar.
- Playback Controls (Previous, Play/Pause, Next): Controls media playback when applicable.
- Volume Control (VOL -, VOL +): Adjusts the sound volume.
- Sound Mode Buttons (STANDARD, TALK, MOVIE, MUSIC): Switches between different audio equalization modes for optimized listening experiences.
Image: A hand holding the ZWP R7114S remote control, demonstrating its comfortable grip during use.
4. Maintenance
4.1 Cleaning the Remote
To ensure the longevity and proper functioning of your remote control, follow these cleaning guidelines:
- Use a soft, dry cloth to wipe the surface of the remote.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid excessive moisture.
- Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the remote's finish or internal components.
4.2 Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops working. Refer to Section 2.1 for battery installation instructions. Always dispose of old batteries responsibly according to local regulations.
4.3 Storage
When not in use for extended periods, store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. If storing for a very long time, consider removing the batteries to prevent leakage.
5. Troubleshooting
If you experience issues with your ZWP R7114S remote control, try the following troubleshooting steps:
- Remote Not Responding:
- Check if the batteries are installed correctly with the correct polarity.
- Replace the batteries with new ones. Weak or dead batteries are a common cause of remote control malfunction.
- Ensure there is a clear line of sight between the remote control and the soundbar's infrared receiver. Remove any obstructions.
- Confirm that the soundbar is powered on and functioning correctly.
- Buttons Not Working:
- Press the buttons firmly.
- Clean the remote's surface, especially around the buttons, to remove any dirt or residue that might be preventing proper contact.
If the issue persists after trying these steps, please refer to the Warranty & Support section for further assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | R7114S |
| Brand | ZWP |
| Compatible Devices | ONN ONA18SB002, ONB18SB001, ONA19SB003; BlackWeb 2.1-Channel BWA18SB001 |
| Color | Black |
| Material | High-quality ABS |
| Special Feature | Ergonomic design, No Programming Required |
| Item Weight | 2.4 ounces |
| Package Dimensions | 10 x 3 x 1 inches |
Image: The remote control displayed with its approximate dimensions (3.54in length, 0.39in thickness, 1.57in width) for reference.
7. Warranty and Support
7.1 Return Policy
This product is typically covered by a 30-day return/replacement policy from the date of purchase. Please refer to your purchase platform's specific return policy for detailed terms and conditions.
7.2 Customer Support
For any questions, concerns, or issues regarding your ZWP R7114S Replacement Remote Control, please do not hesitate to contact the seller, ZWP-STORE, through the platform where you made your purchase. They are committed to assisting you with resolving any problems you may encounter.