Ecolab TRUPOWER Dishmachine Rinse Additive Heavy Duty, 1 Gallon User Manual

1. Introduction

This manual provides instructions for the safe and effective use of Ecolab TRUPOWER Dishmachine Rinse Additive Heavy Duty, 1 Gallon. This product is a high-performance drying agent designed for commercial warewashers, formulated to prevent water spotting and accelerate drying times for dishware, especially plastic items.

2. Safety Information

WARNING: KEEP OUT OF REACH OF CHILDREN.

CAUTION: IRRITANT. May cause eye and skin irritation. Harmful if swallowed.

First Aid:

• Eyes: Rinse immediately with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention.
• Skin: Wash with plenty of soap and water. If irritation occurs, get medical attention.
• Ingestion: Do NOT induce vomiting. Drink plenty of water. Call a poison control center or doctor immediately.
• Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

Important: Do not mix with chlorinated products as this may release chlorine gas. Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE) such as safety glasses and gloves when handling this product.

For additional safety data, refer to the Safety Data Sheet (SDS) available from Ecolab or your distributor.

3. Product Overview

Ecolab TRUPOWER Dishmachine Rinse Additive is formulated to deliver superior drying performance in commercial dishwashing operations. Its advanced formula ensures spot-free results and rapid drying, eliminating the need for hand drying or stacking wet wares.

Figure 1: Front view of the Ecolab TRUPOWER Dishmachine Rinse Additive 1 Gallon bottle, showing the product label and green liquid.

Key Features:

• Spot-Free Drying: Helps water sheet off surfaces, preventing water spots and streaks.
• Fast Drying: Accelerates the drying process, reducing labor and improving operational efficiency.
• Plasticware Performance: Particularly effective in locations with heavy use of plasticware, which often retains water.
• Versatile: Effective in all water conditions.
• Rinse Free: Designed to leave no residue, ensuring clean and hygienic results.

Figure 2: Back view of the Ecolab TRUPOWER Dishmachine Rinse Additive 1 Gallon bottle, displaying additional product information and usage instructions on the label.

4. Setup

Before using the Ecolab TRUPOWER Dishmachine Rinse Additive, ensure your commercial dishmachine is properly installed and maintained according to its manufacturer's guidelines.

1. Locate Rinse Aid Dispenser: Identify the rinse aid dispenser in your dishmachine. This is typically a dedicated compartment or an external dosing system.
2. Inspect Dispenser: Ensure the dispenser is clean and free of any old rinse aid or debris. If necessary, clean the dispenser according to your dishmachine's manual.
3. Prepare Product: Open the 1 Gallon container of Ecolab TRUPOWER Dishmachine Rinse Additive.

Figure 3: Side view of the Ecolab TRUPOWER Dishmachine Rinse Additive 1 Gallon bottle, showing its ergonomic handle for easy pouring.

5. Operating Instructions

Follow these steps to properly use the Ecolab TRUPOWER Dishmachine Rinse Additive:

1. Fill Dispenser: Carefully pour the recommended amount of Ecolab TRUPOWER Rinse Additive into the dishmachine's rinse aid dispenser. The typical recommended amount is 1-2 ounces per gallon of water, but always refer to your dishmachine's specific requirements or consult with an Ecolab representative for optimal dosing.
2. Secure Dispenser: Close the dispenser cap or lid securely after filling.
3. Run Dishwasher Cycle: Operate your dishmachine's normal wash cycle. The rinse additive will be automatically dispensed during the final rinse phase.
4. Verify Results: After the cycle, inspect your dishware for spot-free, fast-drying results. Adjust the dispenser's setting if necessary to achieve desired performance.

Figure 4: Top-back view of the Ecolab TRUPOWER Dishmachine Rinse Additive 1 Gallon bottle, highlighting the cap and important warning labels.

6. Maintenance

Regular maintenance of your dishmachine's rinse aid dispenser ensures optimal performance of the Ecolab TRUPOWER Rinse Additive.

• Regular Cleaning: Periodically clean the rinse aid dispenser to prevent buildup or blockages. Refer to your dishmachine's manual for cleaning instructions.
• Check Levels: Routinely check the rinse aid level in the dispenser and refill as needed to ensure continuous supply.
• Storage: Store the product in its original container in a cool, dry place, away from direct sunlight and incompatible materials. Ensure the cap is tightly closed when not in use.

7. Troubleshooting

If you encounter issues while using Ecolab TRUPOWER Dishmachine Rinse Additive, consider the following:

If problems persist, contact Ecolab customer support or your service technician.

8. Specifications

9. Storage and Disposal

Storage:

• Store in a cool, dry, well-ventilated area.
• Keep container tightly closed when not in use.
• Store away from incompatible materials (e.g., strong acids, strong bases, oxidizing agents).
• Do not store in direct sunlight or near heat sources.

Disposal:

Dispose of contents and container in accordance with local, regional, national, and international regulations. Do not dispose of unused product down the drain or into natural waterways. Consult local authorities for proper disposal methods for chemical waste.

10. Customer Support

For further assistance, technical support, or to obtain a Safety Data Sheet (SDS), please contact Ecolab directly.

Ecolab Contact Information:

• Website: www.ecolab.com
• Phone: Refer to your local Ecolab distributor or the contact information on the product label for specific regional support numbers.

Please have your product model (TRUPOWER Dishmachine Rinse Additive Heavy Duty) and ASIN (B0D9BS146T) ready when contacting support.