Henglong 1/16 7.0 Customized Soviet KV-2 Gigant RTR RC Tank User Manual

1. Unboxing and Inspection

Carefully remove all components from the packaging. Inspect the tank and accessories for any signs of damage. Ensure all items listed in the 'What's Included' section are present.

2. Battery Installation and Charging

Locate the battery compartment on the tank. Connect the 1800mAh tank battery to the tank's power connector. Secure the battery within the compartment. Before first use, fully charge the battery using the provided USB universal charger. The charging indicator on the charger will change when charging is complete.

Figure 2: The tank and its radio controller. Ensure the tank battery is properly installed and charged.

3. Controller Setup

Install the required batteries (not included) into the radio controller. Power on the controller, then power on the tank. The tank and controller should automatically pair. Refer to the detailed manual for specific pairing instructions if issues arise.

4. Smoke Unit Preparation

The tank features an idle smoking unit. To activate this function, carefully drop one drop of the provided smoke liquid into the designated smoke unit reservoir. Overfilling can damage the unit. The smoke output will increase as the tank moves faster, mimicking a real engine.

1. Basic Controls

• Movement: Use the left joystick on the controller to control forward, backward, left, and right movement of the tank.
• Turret Rotation: Use the right joystick to rotate the turret 360 degrees in either direction.
• Barrel Elevation: Use the dedicated buttons or joystick controls to move the main gun barrel up and down by approximately 30 degrees.
• Firing BB Pellets: Load 6mm BB pellets into the designated magazine. Press the firing button on the controller to shoot pellets. The tank will exhibit a realistic hull-recoil action and firing sound effect. The shooting range is approximately 20 meters.
• Smoke Function: Activate the smoke generator via the controller. Ensure smoke liquid has been added as per setup instructions.
• Lights: The tank features emulational LED lights that can be controlled via the radio controller.

2. Infrared Combat System

The tank is equipped with an infrared combating system, allowing multiple players to engage in realistic tank battles. Use the infrared combating transmitter and receiver to register hits and simulate damage. Refer to the detailed manual for specific rules and gameplay modes for infrared combat.

Figure 3: The infrared combat system allows for engaging multi-player tank battles.

1. Cleaning

Regularly clean the tank's exterior with a soft, dry cloth. Avoid using water or harsh chemicals, as this can damage electronic components. Remove any debris from the tracks and wheels to ensure smooth operation.

2. Track and Wheel Maintenance

Periodically inspect the metal tracks, sprocket wheels, idler wheels, and road wheels for wear or damage. Ensure the tracks are free of obstructions and move smoothly. Lubricate moving parts as recommended in the detailed manual to maintain optimal performance and prevent premature wear.

Figure 4: Close-up view of the durable metal tracks and road wheels.

3. Smoke Unit Care

If the smoke unit is not producing smoke, check if the reservoir needs refilling with smoke liquid. Always use only one drop at a time to prevent damage. If the unit becomes clogged, gently clean it as per the detailed manual's instructions.