Introduction
This manual provides instructions for the JMGO Remote Control, designed for seamless operation with JMGO N1S Ultimate, N1S Ultra, N1S Pro, and PicoFlix projectors. This remote features voice search capabilities and Bluetooth connectivity for enhanced user experience.
Figure 1: JMGO N1S Remote Control. A sleek, black remote control with clearly labeled buttons for navigation, volume, power, and dedicated buttons for streaming services like Netflix and YouTube. It features a microphone button for voice search.
Specifications
| Feature | Detail |
|---|---|
| Brand | JmGO |
| Model | N1S |
| Special Feature | Voice Search |
| Color | Black |
| Compatible Devices | N1S Pro, N1S Ultimate, N1S Ultra, PicoFlix |
| Connectivity Technology | Bluetooth |
| Controller Type | Button Control, Voice Control |
| Maximum Range | 33 Feet |
| Battery Type | Alkaline |
Setup
1. Inserting Batteries
- Locate the battery compartment on the back of the remote control.
- Slide open the battery cover.
- Insert two new Alkaline batteries, ensuring correct polarity (+ and -).
- Close the battery cover securely.
2. Pairing the Remote Control
To ensure full functionality, the remote control must be paired with your JMGO projector via Bluetooth.
- Ensure your JMGO projector (N1S Ultimate/Ultra/Pro/PicoFlix) is powered on.
- Point the remote control towards the projector.
- Press and hold the "Return" button and the "Play/Pause" button simultaneously for approximately 3-5 seconds.
- A pairing indicator (e.g., a blinking light on the remote or an on-screen prompt on the projector) should appear.
- Once paired, the indicator will stop blinking, and you can begin using your remote.
Operating the Remote Control
Key Functions:
- Power Button: Turns the projector on or off.
- Navigation Pad (Directional Buttons): Use to navigate through menus and select options.
- OK/Select Button: Confirms selections.
- Return Button: Goes back to the previous screen or menu.
- Home Button: Returns to the main home screen.
- Volume Up/Down: Adjusts the audio volume.
- Microphone Button (Voice Search): Activates the voice search feature. Press and speak your command or search query.
- Dedicated App Buttons (Netflix, YouTube, etc.): Provides quick access to pre-installed streaming applications. The remote supports waking up Netflix with one click even in a power-off state.
Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's performance degrades or if the indicator light (if present) signals low power. Always use Alkaline batteries.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
Remote not responding:
- Check if the batteries are inserted correctly and are not depleted. Replace if necessary.
- Ensure there are no obstructions between the remote and the projector.
- Try re-pairing the remote control with the projector (refer to the "Pairing the Remote Control" section).
Voice search not working:
- Ensure the remote is properly paired via Bluetooth.
- Check the projector's internet connection, as voice search often requires online access.
- Speak clearly and directly into the microphone on the remote.
Warranty and Support
This JMGO Remote Control comes with a 1-Year Manufacturer Warranty.
For further assistance or warranty claims, please contact JMGO customer service.
Visit the JmGO Store on Amazon for more product information and support resources.