1. Introduction
This manual provides essential information for the proper use, care, and maintenance of your Ansell HyFlex 11-281 Industrial Sleeves. Designed for industrial applications requiring superior arm protection, these sleeves incorporate advanced cut resistance technology to ensure user safety and comfort. Please read this manual thoroughly before using the product.
2. Product Overview
The Ansell HyFlex 11-281 Industrial Sleeves are protective arm coverings engineered to provide cut resistance and comfort in demanding work environments. They are designed to be worn in conjunction with cut-resistant gloves for comprehensive hand and arm protection.
Image 1: Ansell HyFlex 11-281 Industrial Sleeve worn on an arm, demonstrating full arm coverage.
3. Features
- INTERCEPT Cut Resistance Technology: Provides advanced cut protection while maintaining a soft and cool feel for the wearer.
- Seamless Design: Ensures an excellent fit and contributes to all-day comfort during extended use.
- Compatibility: Engineered to integrate effectively with any HyFlex cut-resistant glove for enhanced protection.
- Versatility: Available in both wide and narrow versions to accommodate various arm sizes and preferences.
- FDA Compliance: Meets FDA food handling regulations 21 CFR 177.1520 and 21 CFR 177.2600, making them suitable for food contact applications.
4. Setup and Fitting
Proper fitting of the HyFlex 11-281 sleeves is crucial for optimal protection and comfort.
- Select Correct Size: Refer to the sizing chart to ensure you have selected the appropriate sleeve size. The 11-281 model is available in a Size 18 with a narrow thumbslot.
- Donning the Sleeve: Slide the sleeve onto your arm, ensuring the thumbslot is correctly positioned around your thumb.
- Positioning: Adjust the sleeve so it covers the desired area of your arm, typically from the wrist to above the elbow, providing full protection. Ensure there are no gaps between the sleeve and any accompanying gloves.
- Comfort Check: The sleeve should fit snugly but not restrict circulation or movement. If discomfort or tightness occurs, re-adjust or verify the size.
Image 2: Glove Sizing Chart. While this chart is for gloves, the principle of measuring for proper fit applies to sleeves to ensure comfort and protection.
5. Operating (Intended Use)
The HyFlex 11-281 Industrial Sleeves are intended for use in environments where protection against cuts, abrasions, and other mechanical hazards to the arm is required. They are suitable for various industrial applications, including:
- Metal fabrication and handling
- Automotive assembly
- Glass handling
- Food processing (due to FDA compliance)
- General industrial maintenance
Always assess the specific risks of your work environment and ensure the sleeves are appropriate for the task. These sleeves are not designed for protection against chemical hazards, extreme heat, or electrical risks.
Image 3: Worker utilizing Ansell HyFlex 11-281 Industrial Sleeves and gloves for arm protection during metal handling tasks.
6. Maintenance and Care
Proper maintenance extends the life and effectiveness of your HyFlex 11-281 sleeves.
- Cleaning: Wash sleeves regularly to remove dirt, oils, and contaminants. Follow the manufacturer's washing instructions, typically machine wash with mild detergent in cold water and tumble dry on low heat or air dry. Avoid bleach or harsh chemicals.
- Inspection: Before each use, inspect sleeves for any signs of damage, such as cuts, tears, fraying, or excessive wear. Damaged sleeves may compromise protection and should be replaced immediately.
- Storage: Store sleeves in a clean, dry place away from direct sunlight, extreme temperatures, and corrosive substances.
- Disposal: Dispose of worn-out or damaged sleeves according to local regulations for industrial waste.
7. Troubleshooting
If you encounter issues with your HyFlex 11-281 sleeves, consider the following:
- Discomfort/Poor Fit: Ensure the correct size has been selected. Refer to the sizing guide. The sleeve should not be too tight or too loose.
- Reduced Protection: If the sleeve shows signs of wear, cuts, or damage, its protective capabilities may be compromised. Replace the sleeve immediately.
- Odor/Hygiene: Regular washing as per maintenance instructions will help prevent odor buildup and maintain hygiene.
For persistent issues or concerns regarding product performance, contact Ansell customer support.
8. Specifications
| Attribute | Detail |
|---|---|
| Model Number | 11-281 |
| Brand | Ansell |
| Manufacturer | HyFlex |
| Material | Nitrile (Note: This refers to the material of the associated gloves, the sleeves themselves are typically made of high-performance cut-resistant fibers.) |
| Color | Grey |
| Size | 18 (Narrow Thumbslot) |
| Special Feature | Eco-Friendly |
| Package Dimensions | 14.45 x 12.48 x 11.06 inches |
| Package Weight | 6.7 Pounds (for a case of 50) |
| Department | Unisex |
| Date First Available | July 12, 2024 |
9. Warranty Information
Ansell products are manufactured to high-quality standards. For specific warranty details regarding the HyFlex 11-281 Industrial Sleeves, please refer to the official Ansell website or contact Ansell customer service directly. Warranty coverage typically addresses manufacturing defects and material flaws under normal use conditions.
10. Support and Contact
For further assistance, technical support, or inquiries regarding the HyFlex 11-281 Industrial Sleeves, please visit the official Ansell website or use the contact information provided on the product packaging. You can also visit the Ansell Store on Amazon for product information.
