1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your LUTEC 13-inch Dusk to Dawn Outdoor Wall Sconce (Model 5273003012). Please read all instructions carefully before beginning installation and retain this manual for future reference.
The LUTEC outdoor wall sconce features a modern design with a matte metal frame and double glazing, equipped with a dusk to dawn sensor for automatic operation. It is designed for outdoor use and is weather-resistant.
2. Safety Information
- Always turn off power at the main circuit breaker before installation or servicing.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all wiring connections are secure and comply with local electrical codes.
- Do not exceed the maximum wattage specified for the bulb.
- Handle glass components with care to prevent breakage.
3. Package Contents
Verify that all components are present before beginning installation:
- LUTEC 13-inch Outdoor Wall Sconce (Quantity: 2)
- Mounting Screws (Quantity: 2 per fixture)
- Wire Nuts (Quantity: 3 per fixture)
- Instruction Manual
Figure 1: Product Dimensions and Included Accessories
4. Specifications
| Feature | Detail |
|---|---|
| Brand | LUTEC |
| Model Number | 5273003012 |
| Color | Black |
| Material | Aluminum, Glass |
| Style | Modern |
| Product Dimensions | 7.01"L x 8.03"W x 12.8"H |
| Item Weight | 5 Pounds |
| Power Source | AC |
| Bulb Base | E26 |
| Max Wattage | 40W |
| Voltage | 120Vac 60Hz |
| Controller Type | Dusk to Dawn |
| Water Resistance Level | Waterproof |
| Indoor/Outdoor Usage | Outdoor |
5. Installation
Follow these steps to install your outdoor wall sconce:
- Prepare the Installation Area: Turn off power at the circuit breaker. Ensure the mounting surface is clean and stable.
- Mount the Fixture: Secure the mounting bracket to the junction box using the provided screws. Connect the electrical wires (live, neutral, ground) from the fixture to your household wiring using the wire nuts.
- Install the Bulb: The fixture uses an E26 base bulb (not included). Gently unscrew the bottom plate of the fixture to access the bulb socket. Screw in an E26 bulb, ensuring it does not exceed 40W. Reattach the bottom plate securely.
Figure 2: Bulb Installation
For a visual guide on bulb installation and initial operation, please refer to the video below:
Video 1: Bulb Installation and Initial Light Activation
This video demonstrates the process of screwing in the E26 bulb into the fixture and shows the light activating. It also briefly illustrates the light turning on at dusk and off at dawn.
6. Operation
The LUTEC outdoor wall sconce is equipped with an integrated Dusk to Dawn sensor, which automates its operation based on ambient light levels.
- Automatic On: The light will automatically turn on when the ambient light level drops (at dusk or in dark conditions).
- Automatic Off: The light will automatically turn off when sufficient ambient light is detected (at dawn).
Figure 3: Dusk to Dawn Sensor
Figure 4: Automatic Dusk to Dawn Functionality
7. Maintenance
To ensure optimal performance and longevity of your outdoor wall sconce, follow these maintenance guidelines:
- Cleaning: Periodically clean the glass panels and metal frame with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Bulb Replacement: When replacing the bulb, ensure the power is off at the circuit breaker. Use only E26 base bulbs with a maximum wattage of 40W.
- Weather Resistance: The fixture is designed to be waterproof and resistant to various weather conditions including rain, snow, sun, and wind. Regular inspection for any damage to seals or housing is recommended.
Figure 5: Weather Resistance Features
8. Troubleshooting
If you encounter issues with your LUTEC outdoor wall sconce, refer to the following common problems and solutions:
- Light does not turn on:
- Check if the power is on at the circuit breaker.
- Ensure the bulb is correctly installed and not burnt out.
- Verify that the dusk to dawn sensor is not obstructed by debris or positioned in an area that receives constant light.
- Light stays on during the day:
- Check if the dusk to dawn sensor is obstructed or covered, preventing it from detecting daylight.
- Ensure there are no external light sources (e.g., other bright lights) directly illuminating the sensor.
- Light flickers:
- Ensure the bulb is securely screwed into the socket.
- Check for loose wiring connections.
9. Warranty and Support
LUTEC provides 7*24h after-sales service for this product. For warranty information or technical support, please contact LUTEC customer service directly. Keep your purchase receipt as proof of purchase.
