1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your BLNAN LED Flush Mount Ceiling Light. This product is designed for indoor use, offering selectable color temperatures to suit various lighting preferences.
Image 1.1: BLNAN LED Flush Mount Ceiling Light. This image displays the sleek, low-profile design of the ceiling light, suitable for various indoor settings.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- Do not use with dimmer switches. This fixture is not dimmable.
- Do not modify the fixture. Any modifications may void the warranty and create safety hazards.
- Suitable for indoor use only.
3. Package Contents
Verify that all components are present before beginning installation:
- LED Flush Mount Ceiling Light Fixture (x1)
- Mounting Hardware (screws, wire nuts, mounting bracket)
- User Manual (this document)
4. Setup and Installation
Follow these steps for safe and proper installation:
- Turn Off Power: Before starting, ensure the power supply to the junction box is turned off at the circuit breaker.
- Prepare Mounting Bracket: Attach the provided mounting bracket to the junction box using the screws. Ensure it is securely fastened.
- Select Color Temperature: Before mounting the fixture, locate the toggle switch on the back of the light fixture. Select your desired color temperature (3000K Warm White, 4000K Neutral White, or 5000K Cold White). This setting cannot be changed after installation without removing the fixture.
- Wire Connections: Connect the household wires to the fixture wires using the provided wire nuts. Connect the black wire (live) to the black fixture wire, the white wire (neutral) to the white fixture wire, and the ground wire to the ground fixture wire.
- Mount the Fixture: Align the fixture with the mounting bracket and secure it in place. Ensure the wires are not pinched.
- Restore Power: Once the fixture is securely mounted, restore power at the circuit breaker.
Image 4.1: Color Temperature Selection. This image illustrates the toggle switch on the back of the fixture, allowing selection between 3000K (Warm White), 4000K (Neutral White), and 5000K (Cold White) before installation.
Image 4.2: Easy Installation. This image demonstrates the simple installation process, showing how the mounting bracket attaches to a junction box and the fixture twists into place after wiring.
5. Operating Instructions
Your BLNAN LED Flush Mount Ceiling Light is designed for simple operation:
- Turning On/Off: Use your standard wall switch to turn the light fixture on or off.
- Color Temperature: The color temperature (3000K, 4000K, or 5000K) is set during installation using the toggle switch on the back of the fixture. It cannot be changed via the wall switch or a dimmer.
6. Maintenance
The BLNAN LED Flush Mount Ceiling Light requires minimal maintenance:
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
- Dustproof Design: The fixture features an IP40 dustproof rating, which helps prevent dust and insects from entering the light, reducing the need for frequent internal cleaning.
- No Bulb Replacement: This LED fixture has an integrated LED light source with a long lifespan (approximately 30,000 hours), eliminating the need for bulb replacement.
Image 6.1: IP40 Dustproof Design. This image illustrates the sealed design of the light fixture, highlighting its IP40 dustproof rating which prevents dust and insects from accumulating inside.
7. Troubleshooting
If you encounter issues with your ceiling light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Loose wiring. Faulty fixture. | Check circuit breaker. Ensure power is on. Verify all wire connections are secure. If issues persist, contact customer support. |
| Light flickers. | Loose wiring. Incompatible dimmer switch (if mistakenly used). | Check wire connections. Ensure no dimmer switch is connected. This fixture is designed for no flicker operation. |
| Wrong color temperature. | Incorrect setting of the toggle switch during installation. | Turn off power, carefully remove the fixture, adjust the toggle switch to the desired color temperature, and reinstall. |
8. Specifications
Detailed technical specifications for the BLNAN LED Flush Mount Ceiling Light:
- Brand: BLNAN
- Model Number: 7963941e-0dae-4f45-b6ef-1d89187437a9
- Wattage: 18 Watts
- Brightness: 1800 Lumens
- Color Temperatures: 3000K (Warm White), 4000K (Neutral White), 5000K (Cold White) - Selectable via toggle switch
- Light Source Type: Integrated LED
- Material: Plastic
- Finish Type: White
- Mounting Type: Flush Mount (Ceiling or Wall)
- Control Method: Wall Switch (for On/Off), Toggle Switch (for CCT selection)
- Indoor/Outdoor Usage: Indoor Only
- Dustproof Rating: IP40
- Lifespan: Approximately 30,000 hours
- CRI: 90
Image 8.1: No Flicker & CRI 90. This image highlights the high color rendering index (CRI 90) and flicker-free performance of the LED light, ensuring comfortable and accurate illumination.
Image 8.2: Room Suitability. This image shows the light installed in various room settings, indicating its suitability for rooms ranging from 100-160 sq ft.
9. Warranty and Support
BLNAN products are manufactured to high-quality standards. For warranty information or technical support, please contact BLNAN customer service through the retailer where the product was purchased or visit the official BLNAN website.
Contact Information: Please refer to your purchase documentation or the BLNAN brand store for the most current support contact details.
