Introduction
Welcome to the Vexilar T7 Robot Vacuum Cleaner instruction manual. This document provides essential information for the safe and efficient operation, setup, and maintenance of your new robotic cleaner. The Vexilar T7 is designed to simplify your cleaning routine with its 2-in-1 vacuuming and mopping capabilities, intelligent navigation, and multiple control options.
Please read this manual thoroughly before using the product and retain it for future reference.
Important Safety Information
To reduce the risk of injury or damage, read these safety instructions carefully and keep them handy for future reference.
- The appliance is for indoor use only.
- Do not use the appliance in environments with high humidity or near heat sources.
- Ensure the charging dock is placed on a flat, stable surface against a wall, with adequate clear space around it.
- Keep loose clothing, hair, fingers, and all body parts away from openings and moving parts.
- Do not operate the robot in areas where there are lit candles or fragile objects.
- Do not allow children to play with the robot.
- Use only the manufacturer-specified power adapter and battery.
- Regularly clean the brushes and filters to maintain optimal performance.
Package Contents
Verify that all components are present and in good condition upon unboxing:
- 1x Vexilar T7 Robot Vacuum
- 1x 2-in-1 Dustbin & Water Tank
- 2x Mopping Cloths
- 2x HEPA Filters
- 1x Cleaning Tool
- 4x Side Brushes
- 1x Remote Control
- 1x AC Power Adapter
- 1x Charging Base
- 1x User Manual
Setup
1. Charging Dock Placement
Place the charging dock on a hard, level surface against a wall. Ensure there is at least 1 meter (3 feet) of clear space in front of the dock and 0.5 meters (1.5 feet) on either side to allow the robot to easily return for charging. Connect the power adapter to the charging dock and plug it into a wall outlet.
2. Initial Charging
Place the Vexilar T7 onto the charging dock. Ensure the charging contacts on the robot align with those on the dock. The robot will begin charging automatically. For first-time use, fully charge the robot before operation, which typically takes several hours.
3. Installing Side Brushes
Snap the side brushes into their designated slots on the bottom of the robot until they click into place.
4. App Connection (2.4GHz WiFi Required)
To utilize smart features and remote control, connect your Vexilar T7 to the companion app:
- Download the Vexilar app from your mobile device's app store.
- Ensure your T7 robot is on and placed on the charging dock.
- Press and hold the start button on the robot for 5 seconds to enter pairing mode.
- Connect your smartphone to a 2.4GHz WiFi network. The app only supports 2.4GHz WiFi.
- Follow the in-app instructions to add your T7 robot, selecting and connecting to the robot's WiFi signal (e.g., "SL-V***tidy-XXXX").
- Wait for the robot to pair successfully.
Operating Instructions
1. Power On/Off
Press the power button on the robot or the remote control to start or pause cleaning. Hold the power button for a few seconds to turn the robot off.
2. Cleaning Modes
The Vexilar T7 offers four distinct cleaning modes, selectable via the app or remote control:
- Auto Clean: The robot intelligently navigates to clean the entire floor area.
- Spot Clean: The robot cleans a specific area in a spiral pattern, ideal for concentrated dirt.
- Edge Clean: The robot cleans along walls and furniture edges.
- Mop Mode: For wet cleaning, attach the mopping cloth and fill the water tank. The robot will mop hard floors. Note: Do not use Mop Mode on carpets.
3. Suction Power and Water Flow Adjustment
Adjust the suction power (Max/Standard/Quiet) and water flow levels (4 levels) via the mobile app to suit different floor types and cleaning needs. The robot automatically recognizes carpets and switches to maximum suction mode. For mopping, ensure the mop holder is removed before cleaning carpets.
4. Scheduling
Use the mobile app to set cleaning schedules for specific days and times. The robot will automatically start cleaning and return to its charging base when finished or when the battery is low.
5. Control Methods
The Vexilar T7 can be controlled via:
- Mobile App: Full control over modes, schedules, suction, water flow, and monitoring.
- Voice Control: Compatible with Google Home, Amazon Alexa, and Siri for convenient voice commands.
- Remote Control: A handheld remote is included for basic functions like starting, stopping, and directing the robot.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your Vexilar T7.
1. Emptying and Cleaning the Dustbin & Water Tank
After each use, or when indicated by the app, empty the dustbin. Remove the 2-in-1 dustbin and water tank, discard debris, and rinse both compartments with water. Allow them to air dry completely before reinserting.
2. Cleaning/Replacing Filters
The HEPA filters should be cleaned regularly using the provided cleaning tool. Tap them gently to remove dust. Replace filters every 3-6 months, or as needed, to maintain suction efficiency.
3. Cleaning Brushes
Periodically remove and clean the main roller brush and side brushes. Use the cleaning tool to cut and remove any tangled hair or debris. Ensure brushes spin freely after cleaning.
4. Cleaning Sensors and Charging Contacts
Wipe the cliff sensors, anti-collision sensors, and charging contacts on both the robot and the charging dock with a clean, dry cloth. This prevents errors and ensures proper charging.
Troubleshooting
If you encounter issues with your Vexilar T7, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not turn on or charge. | Battery low; charging contacts dirty; power adapter not connected. | Ensure robot is on charging dock and contacts are clean. Check power adapter connection. |
| Robot gets stuck frequently. | Obstacles (cables, rugs); narrow spaces. | Clear the cleaning area of obstacles. Use boundary strips if available. |
| Poor cleaning performance. | Dustbin full; filters clogged; brushes tangled. | Empty dustbin, clean/replace filters, clean brushes. |
| App connection issues. | Incorrect WiFi band (not 2.4GHz); robot not in pairing mode. | Ensure phone is on 2.4GHz WiFi. Re-enter pairing mode on robot. |
| Robot falls down stairs. | Cliff sensors dirty or obstructed. | Clean cliff sensors thoroughly. |
For further assistance, please refer to the full user manual or contact Vexilar customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Vexilar |
| Model Name | T7 |
| Product Dimensions | 16"L x 13"W x 4.5"H |
| Item Weight | 7 pounds |
| Color | Black |
| Battery Life | Up to 120 minutes (100 minutes listed in specifications) |
| Power Source | Battery Powered (3 Lithium Ion batteries included) |
| Dustbin Capacity | 0.5 Liters (500ML) |
| Water Tank Capacity | 200ml (integrated with dustbin) |
| Filter Type | Sponge (HEPA filters included) |
| Compatible Devices | Google Home, Amazon Alexa, Siri (via app) |
| Special Features | 2-in-1 Vacuuming & Mopping, 2800Pa Suction, Automatic Recharging, Four Cleaning Modes, Anti-collision & Anti-fall, Automatic Carpet Detection, App/Voice/Remote Control, Ultra-Quiet Cleaning |
Warranty and Support
For warranty information or technical support, please refer to the warranty card included in your package or contact Vexilar customer service directly. Contact details can typically be found on the official Vexilar website or within the product packaging.
