Xmenha OWS Open-Ear Bluetooth 5.4 Earphones User Manual

1. Introduction

Thank you for choosing the Xmenha OWS Open-Ear Bluetooth 5.4 Earphones. These earphones are designed to provide a comfortable and safe audio experience by allowing you to remain aware of your surroundings while enjoying high-quality sound. This manual will guide you through the setup, operation, and maintenance of your new earphones.

Key Features:

• Open-Ear Design: Ensures situational awareness for enhanced safety during outdoor activities.
• Comfortable Fit: Lightweight silicone material and ear-clip design for stable and painless wear.
• Bluetooth 5.4: Provides stable and efficient wireless connectivity.
• Long Battery Life: Up to 30 hours of play time with the charging case.
• Waterproof & Sweatproof: Suitable for sports and outdoor use.
• Clear Call Quality: Built-in microphone with noise suppression for clear communication.

Figure 1.1: The open-ear design allows you to stay aware of your surroundings, enhancing safety during activities like cycling or running.

Figure 1.2: The Xmenha OWS earphones offer a comfortable experience with Bluetooth 5.4 and panoramic surround sound.

2. Setup

2.1 Charging the Earphones and Case

Before first use, fully charge the earphones and the charging case.

1. Connect the provided USB-C cable to the charging port on the case and to a USB power source.
2. The digital display on the charging case will show the battery level.
3. Place the earphones into the charging case. They will begin charging automatically.
4. A full charge typically takes approximately 1.5-2 hours.

The charging case has a 400mAh battery capacity, providing multiple charges for the earphones, extending total play time to about 30 hours.

Figure 2.1: The intelligent power digital display on the charging case allows you to monitor battery levels.

Figure 2.2: Charging the earphones and case ensures extended use, with approximately 5 hours of play time per earbud charge and 800 hours of standby time for the case.

2.2 Pairing with a Bluetooth Device

1. Ensure the earphones are charged.
2. Open the charging case. The earphones will automatically enter pairing mode, indicated by a flashing LED light on the earphones.
3. On your device (smartphone, tablet, etc.), enable Bluetooth.
4. Search for available Bluetooth devices and select "Xmenha OWS" (or similar name) from the list.
5. Once connected, the LED indicator on the earphones will stop flashing.
6. The earphones will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.

3. Operating the Earphones

The Xmenha OWS earphones feature touch controls for easy management of music and calls.

3.1 Music Playback

• Play/Pause: Single tap on either earphone.
• Next Track: Double tap on the right earphone.
• Previous Track: Double tap on the left earphone.
• Volume Up: Triple tap on the right earphone.
• Volume Down: Triple tap on the left earphone.

3.2 Call Management

• Answer/End Call: Single tap on either earphone.
• Reject Call: Press and hold either earphone for 2 seconds.

3.3 Voice Assistant

• Activate Voice Assistant: Press and hold either earphone for 3 seconds (when not on a call).

Figure 3.1: Experience panoramic surround sound and Hi-Res audio quality with the Xmenha OWS earphones.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your earphones.

• Cleaning: Use a soft, dry, lint-free cloth to clean the earphones and charging case. Do not use abrasive cleaners or solvents.
• Water Resistance: The earphones are waterproof and sweatproof, suitable for daily use and exercise. However, they are not designed for swimming or prolonged submersion in water. Ensure the charging port is dry before charging.
• Storage: Store the earphones in their charging case when not in use to protect them and keep them charged. Avoid extreme temperatures.
• Battery Care: To preserve battery life, avoid fully discharging the earphones frequently. Charge them regularly, even if not used for extended periods.

5. Troubleshooting

If you encounter issues with your Xmenha OWS earphones, try the following solutions:

5.1 Earphones Not Pairing

• Ensure both earphones are charged.
• Turn off and on your device's Bluetooth.
• Delete "Xmenha OWS" from your device's Bluetooth list and try pairing again.
• Place earphones back in the case, close the lid, wait a few seconds, then open to re-enter pairing mode.

5.2 No Sound or Low Volume

• Check the volume level on both your earphones and your connected device.
• Ensure the earphones are properly connected to your device.
• Try playing audio from a different application or source.

5.3 Charging Issues

• Ensure the USB-C cable is securely connected to both the charging case and the power source.
• Try a different USB-C cable or power adapter.
• Clean the charging contacts on the earphones and inside the case with a dry cotton swab.

5.4 Earphones Disconnect Frequently

• Ensure your device is within the Bluetooth range (approximately 10 meters/33 feet) without significant obstacles.
• Avoid strong electromagnetic interference.
• Re-pair the earphones with your device.

6. Specifications

7. Warranty and Support

Xmenha products are manufactured with high standards of quality. For any warranty claims or technical support, please refer to the retailer's return policy or contact Xmenha customer service directly through their official channels. Please retain your proof of purchase for warranty purposes.