1. Introduction
Thank you for purchasing the UNHO Mobile TV Stand. This stand is designed to securely hold televisions and monitors ranging from 32 to 70 inches, offering mobility, height adjustment, and tilt functionality. It is suitable for various environments, including homes, offices, and display areas. Please read this manual carefully before assembly and use to ensure proper installation and safe operation.
2. Safety Information
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or faulty.
- Follow all assembly steps precisely. Incorrect assembly can lead to product failure or injury.
- Do not exceed the maximum load capacity of 50 kg (110 lbs).
- Ensure the TV's VESA mounting pattern is compatible with the stand (100x100mm to 600x400mm).
- Always lock the casters when the stand is in a stationary position to prevent accidental movement.
- Distribute weight evenly on the shelves. Do not overload.
- Keep children and pets away from the stand during assembly and adjustment.
- Avoid placing the stand on uneven surfaces.
3. Package Contents
Please verify that all the following parts are included in your package:
- Base with Casters (x1)
- Vertical Support Poles (x2)
- TV Mounting Bracket (x1)
- Adjustable Shelves (x2)
- Top Camera/Accessory Tray (x1)
- Cable Management Straps (x2)
- Hardware Kit (screws, washers, spacers, wrenches)
- Instruction Manual (x1)
4. Specifications
| Feature | Specification |
|---|---|
| Brand | UNHO |
| Model Number | U-890A-JP1A240710-1 |
| Material | Alloy Steel |
| Color | Black |
| Compatible TV Sizes | 32-70 inches |
| VESA Compatibility | 100x100mm to 600x400mm |
| Load Capacity | 50 kg (110 lbs) |
| Height Adjustment | Multiple levels (up to 170cm total height) |
| Tilt Angle | Up/Down 15 degrees |
| Movement Type | Rolling (with lockable casters) |
| Product Dimensions | 64 x 90 x 170 cm (approximate, fully extended) |
| Product Weight | 14.3 kg |
5. Setup and Assembly
Follow these steps to assemble your UNHO Mobile TV Stand:
- Assemble the Base: Attach the vertical support poles to the octagonal base. Ensure all screws are tightened securely. The base features lockable casters for stability and mobility.
- Install the TV Mounting Bracket: Secure the TV mounting bracket to the top of the vertical support poles. Ensure the bracket is oriented correctly for your TV's VESA pattern.
- Attach the Shelves: The two adjustable shelves can be installed at your desired height on the vertical poles. These shelves are removable and can be adjusted infinitely. The top shelf is designed for cameras or small accessories.
- Mount the TV:
- Attach the TV adapter plates to the back of your television using the appropriate VESA screws and spacers from the hardware kit.
- Carefully lift the TV and hook the adapter plates onto the TV mounting bracket on the stand.
- Secure the TV to the bracket using the safety screws or locking mechanisms provided. Ensure the TV is stable and level.
- Cable Management: Use the included cable management straps to organize and secure cables along the vertical poles for a tidy setup.
Image 5.1: Overall dimensions and VESA compatibility for 32-70 inch TVs.
Image 5.2: Key features including anti-drop screws, cable management, stable octagonal base, and lockable casters.
6. Operating Instructions
6.1 Height Adjustment
The TV mounting bracket allows for vertical height adjustment in three stages. Additionally, the two shelves can be adjusted infinitely along the vertical poles. To adjust the height:
- Loosen the height adjustment screws on the vertical poles.
- Carefully raise or lower the TV mounting bracket or shelves to the desired position.
- Tighten the screws firmly to secure the components at the new height.
Image 6.1: TV and shelf height adjustment mechanism.
6.2 Screen Tilt Adjustment
The TV mounting bracket allows for a tilt adjustment of up to 15 degrees upwards or downwards to achieve an optimal viewing angle.
- Locate the tilt adjustment knob or screws on the side of the TV mounting bracket.
- Loosen the knob/screws.
- Adjust the screen to the desired tilt angle (up to 15 degrees up or down).
- Tighten the knob/screws firmly to lock the screen in place.
Image 6.2: Screen tilt adjustment mechanism.
6.3 Moving the Stand
The stand is equipped with smooth-rolling casters for easy mobility. Each caster has a stopper for locking the stand in position.
- To move the stand, ensure all caster stoppers are disengaged (unlocked).
- Gently push the stand to the desired location.
- Once in position, engage all caster stoppers (lock them) to prevent unintended movement and ensure stability.
Image 6.3: Detail of a lockable caster.
7. Maintenance
- Cleaning: Wipe the stand with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild detergent, then dry thoroughly. Avoid abrasive cleaners or solvents.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Caster Maintenance: Keep casters free of dust and debris to ensure smooth movement.
8. Troubleshooting
- Stand is unstable: Ensure all assembly screws are tightened. Verify the stand is on a flat, level surface. Lock all casters when stationary.
- Difficulty moving the stand: Check if casters are locked. Clean any debris from the casters.
- TV is not level: Recheck the TV mounting on the bracket. Adjust the tilt mechanism if necessary. Ensure the stand itself is on a level surface.
- Shelves are slipping: Ensure the shelf adjustment screws are fully tightened. Do not overload the shelves.
9. Warranty and Support
For warranty information or technical support, please refer to the purchase documentation or contact UNHO customer service through the retailer where the product was purchased. Please have your model number (U-890A-JP1A240710-1) and purchase date available when contacting support.