NEEWER DMW-BLK22 AC Power Supply Adapter & DC Coupler Dummy Battery Kit User Manual

1. Introduction

This manual provides instructions for the NEEWER DMW-BLK22 AC Power Supply Adapter and DC Coupler Dummy Battery Kit. This kit is designed to provide continuous power to compatible Panasonic Lumix cameras, eliminating the need for frequent battery changes during extended shooting sessions.

Compatibility

This DMW-BLK22 dummy battery kit is compatible with the following Panasonic Lumix camera models:

• DC-S9
• DC-G9 II
• DC-S5
• DC-S5 II
• DC-S5 IIX
• GH5 II
• GH6
• S5II
• S5IIX
• S5M2
• S5M2X
• GH5M2

Image: The NEEWER DMW-BLK22 dummy battery connected to a Panasonic Lumix camera, demonstrating how it fits into the battery compartment. This image highlights the product's compatibility with various camera models.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x DMW-BLK22 Dummy Battery (DC Coupler)
• 1 x AC/DC Adapter
• 1 x AC Power Cord (Type A - 2 pin, North American)

Image: A visual representation of the package contents, including the DMW-BLK22 dummy battery, the AC/DC adapter, and the AC power cord.

3. Setup Instructions

Follow these steps to properly set up your NEEWER DMW-BLK22 power supply kit:

1. Open the Battery Compartment: Locate and open the battery compartment cover on your camera. Ensure the power connector port, usually located on the cover, is accessible.
2. Insert the Dummy Battery: Carefully insert the DMW-BLK22 DC Coupler (dummy battery) into the camera's battery slot. Ensure it is correctly oriented and fully seated.
3. Close the Battery Compartment: Route the dummy battery's cable through the designated power connector port on the battery compartment cover. Close the battery compartment cover completely. Note: The camera will not power on if the battery cover is not fully closed.
4. Connect to AC Adapter: Connect the cable from the dummy battery to the AC/DC adapter.
5. Connect to Power Source: Connect the AC power cord to the AC/DC adapter, then plug the power cord into a standard AC outlet.
6. Power On: Turn on your camera. It should now receive continuous power from the AC outlet.

Image: A visual guide showing the four steps for installing the dummy battery: opening the compartment, inserting the dummy battery, closing the cover with the cable routed, and connecting to power.

Setup Video Guide

4. Operating Instructions

The NEEWER DMW-BLK22 kit is designed for continuous power supply to your camera, ideal for extended shooting sessions, studio work, time-lapses, or when downloading and viewing media.

• Continuous Power: Once properly installed and connected to an AC outlet, the kit provides uninterrupted power to your camera.
• No Battery Charging: This dummy battery serves solely to provide constant power. It does NOT charge your camera's internal battery or any other batteries.
• Fully Decoded: The dummy battery is fully decoded, which means your camera should recognize it as a valid power source without displaying error messages or warnings related to non-original batteries.

Image: A close-up of a camera screen displaying a 100% battery indicator, confirming that the fully decoded dummy battery is providing stable power without triggering warnings.

5. Maintenance

To ensure the longevity and optimal performance of your NEEWER DMW-BLK22 power supply kit, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the dummy battery, AC adapter, and power cord. Avoid using liquid cleaners or solvents.
• Storage: When not in use, store the kit in a cool, dry place away from direct sunlight and extreme temperatures.
• Cable Care: Avoid bending or crimping the cables excessively. Do not place heavy objects on the cables.
• Inspection: Periodically inspect the cables and connectors for any signs of damage, such as fraying or exposed wires. Discontinue use if any damage is found.

6. Troubleshooting

If you encounter issues with your NEEWER DMW-BLK22 power supply kit, refer to the following common problems and solutions:

Image: An illustration highlighting the multiple circuit protection features of the AC adapter, including protection against overheating, overcharge, overvoltage, and short circuit.

7. Specifications

Image: A comprehensive diagram showing the individual components of the power supply kit, including the dummy battery, AC adapter, and power cord, along with their respective lengths and key specifications.

8. Warranty and Support

Warranty Information

This NEEWER product is covered by a 1 Year Manufacturer Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

The warranty does not cover damage caused by:

• Accident, abuse, misuse, or neglect.
• Unauthorized repair or modification.
• Improper installation or operation not in accordance with this manual.
• External causes such as power surges or lightning.

Customer Support

For technical assistance, warranty claims, or any questions regarding your NEEWER DMW-BLK22 power supply kit, please contact NEEWER customer support through their official website or the retailer where the product was purchased.

Please have your product model (DR-BLK22) and proof of purchase ready when contacting support.