LEONLITE 28W LED Security Light with GFCI Outlets - Instruction Manual

Product Overview

The LEONLITE 28W LED Security Light is designed to provide bright, reliable outdoor lighting with added convenience. It features two adjustable LED heads, a motion sensor, and built-in GFCI-protected outlets for safe outdoor power access. This light is suitable for wet locations and offers both motion sensor and dusk-to-dawn operating modes.

Key Features:

• Integrated GFCI Outlets: Two built-in outlets provide safe power for outdoor tools, string lights, or cameras, with an elevated design to prevent water ingress.
• Dual Lighting Modes: Choose between energy-saving Motion Sensor Mode or continuous Dusk to Dawn Mode for constant illumination.
• Adjustable Motion Sensor: Detects motion up to 45 feet with a 150° angle, allowing customization of light duration (30S/60S/120S) and sensitivity.
• Bright and Adjustable Illumination: Delivers 2500 lumens of 5000K daylight with two adjustable heads for wide and targeted light coverage.
• Durable and Certified: Constructed with robust materials, ETL Listed for safety, and backed by a 3-year warranty for long-term outdoor use.

Setup and Installation

Proper installation is crucial for the safe and effective operation of your LEONLITE LED Security Light. Always ensure the power is turned off at the circuit breaker before beginning any electrical work.

Installation Steps:

1. Turn Off Power: Locate the circuit breaker controlling the outdoor light fixture and switch it to the OFF position. Verify power is off using a voltage tester.
2. Remove Old Fixture (if applicable): Carefully disconnect and remove any existing light fixture, ensuring all wires are safely handled.
3. Mount the Bracket: Attach the provided mounting bracket to the junction box on your wall. Ensure it is securely fastened.
4. Wire Connections: Connect the wires from the new LEONLITE security light to the corresponding wires from your electrical box. Typically, this involves connecting:
   • Green wire (Ground) to the bare copper or green wire from the house.
   • White wire (Neutral) to the white wire from the house.
   • Black wire (Live/Hot) to the black wire from the house.
   Use wire nuts to secure connections and ensure they are tight.
5. Mount the Light Fixture: Carefully align the light fixture with the mounting bracket and secure it with the provided screws. Ensure a tight seal to prevent moisture intrusion.
6. Adjust Light Heads and Sensor: Position the two LED light heads to cover the desired area. Adjust the motion sensor to optimize detection range and angle.
7. Restore Power: Once installation is complete and secure, turn the power back ON at the circuit breaker.

Image: Installation of the LEONLITE security light, highlighting the integrated GFCI outlets and electrical connections.

Operating Instructions

Your LEONLITE LED Security Light offers flexible operation modes and adjustable settings to suit your needs.

Mode Selection:

• Motion Sensor Mode (PIR): The light will only activate when motion is detected within its sensing range during nighttime. This mode is energy-efficient and ideal for security.
• Dusk to Dawn Mode (D2D): The light will automatically turn on at dusk and remain on until dawn, providing continuous illumination throughout the night.

Adjusting Settings:

The motion sensor unit has adjustable dials for time and sensitivity, typically located on the underside of the sensor.

• TIME Setting: Controls how long the light stays on after motion is detected. Options usually include 30 seconds, 60 seconds, or 120 seconds.
• SENSITIVITY Setting: Adjusts the detection range of the motion sensor. Options typically include Low (L), Medium (M), and High (H), corresponding to a range of 13-45 feet.
• TEST Mode: Allows you to test the motion sensor's functionality and coverage area during daylight hours. The light will turn on for a short period when motion is detected.

Image: Diagram showing the operational logic for Dusk to Dawn and Motion Sensor modes, indicating light behavior during day and night.

Image: Close-up view of the adjustable dials on the motion sensor for setting time duration and sensitivity.

Maintenance

To ensure optimal performance and longevity of your LEONLITE LED Security Light, follow these simple maintenance guidelines:

• Regular Cleaning: Periodically clean the light heads and motion sensor lens with a soft, damp cloth to remove dirt, dust, or debris that may obstruct light output or sensor function. Do not use abrasive cleaners.
• Inspect for Damage: Annually inspect the fixture for any signs of physical damage, loose wiring, or corrosion. Address any issues promptly.
• Check GFCI Outlets: Test the GFCI outlets monthly by pressing the 'TEST' button, then the 'RESET' button. The outlet should trip and reset correctly. If it does not, consult a qualified electrician.

Troubleshooting

If your LEONLITE LED Security Light is not functioning as expected, try the following troubleshooting steps:

• Light Not Turning On:
  • Check the circuit breaker to ensure power is on.
  • Verify the light sensor is not obstructed by dirt or debris.
  • Ensure the motion sensor is set to an appropriate sensitivity and time duration.
  • If in Motion Sensor Mode, confirm it's dark enough for activation.
• Light Stays On Continuously:
  • Check if the light is set to Dusk to Dawn Mode.
  • Ensure the motion sensor is not detecting constant movement (e.g., swaying branches, passing traffic). Adjust sensitivity if necessary.
• Motion Sensor Not Detecting:
  • Increase the sensitivity setting on the motion sensor.
  • Clear any obstructions in the sensor's detection path.
  • Ensure the sensor is aimed correctly towards the desired detection area.
• GFCI Outlets Not Working:
  • Press the 'RESET' button on the GFCI outlet.
  • If the outlet trips frequently, there might be an electrical issue or an overloaded circuit. Consult a qualified electrician.

If these steps do not resolve the issue, please contact LEONLITE customer support.

Product Specifications

Warranty and Support

LEONLITE warrants that this product is free from defects in materials and workmanship for a period of 3 years from the date of purchase. This warranty does not apply if the product has been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.

For technical assistance, troubleshooting, or warranty claims, please contact LEONLITE customer support through their official channels or the retailer where the product was purchased.