1. Product Overview
The WenzhiIoT Smart Presence Sensor (MTG276-WF-RL-24G) is a Wi-Fi enabled 24 GHz mmWave radar sensor designed for accurate human presence detection. It can detect human presence, static presence, micro-motion, and general movement, making it suitable for various smart home applications, including automated lighting control.
Key Features:
- Advanced Detection: Utilizes mmWave Radar for precise detection of human presence, including static states like sleeping.
- Dual Installation Options: Supports both ceiling and wall mounting using double-sided adhesive or expansion screws.
- Illuminance Monitoring: Integrated light intensity sensor for smart scene linkage, allowing automatic light control based on ambient brightness.
- Integrated 16A Relay: Features a built-in relay for direct control of lighting or other electrical loads (85-265V AC).
- Configurable Settings: Offers multiple adjustable parameters for sensitivity, detection range, relay modes, and more via the Tuya Smart APP.
Package Contents:
- WenzhiIoT Smart Presence Sensor (MTG276-WF-RL-24G)
- Double-sided tape
- Expansion screws
- User Manual
2. Safety Information
Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Electrical Safety: Installation should be performed by a qualified electrician or in accordance with local electrical codes. Ensure power is disconnected before wiring.
- Voltage: This device operates on 85-265V AC. Verify your power supply matches this requirement.
- Indoor Use Only: This sensor is designed for indoor use. Do not expose to moisture, extreme temperatures, or direct sunlight.
- Avoid Obstructions: Do not install the sensor near large metal objects or other devices that may interfere with radar signals.
- Children and Pets: Keep the device out of reach of children and pets.
3. Installation
3.1 Choosing an Installation Location
Select a location that provides an unobstructed view of the area to be monitored. Avoid placing the sensor directly above heat sources or in areas with constant air movement (e.g., near air vents) to prevent false detections. The sensor can be installed on the ceiling or a wall.
3.2 Mounting the Sensor
The sensor supports two primary mounting methods:
- Using Double-Sided Tape:
- Clean the mounting surface thoroughly to ensure it is free of dust and grease.
- Apply the provided double-sided tape to the back of the sensor.
- Press the sensor firmly onto the desired ceiling or wall location for at least 30 seconds.
- Using Expansion Screws:
- Mark the positions for the expansion screw installation holes on the ceiling or wall.
- Drill pilot holes at the marked positions.
- Insert the expansion screws into the holes.
- Align the sensor's mounting holes with the screws and secure the sensor.

3.3 Wiring Instructions
WARNING: Ensure power is OFF at the circuit breaker before performing any wiring.
The sensor requires an 85-265V AC power supply. It also includes a 16A relay for direct control of a light fixture or other compatible load.
- Identify the Live (L) and Neutral (N) wires from your AC power supply.
- Connect the Live (L) wire to the 'L' terminal on the sensor.
- Connect the Neutral (N) wire to the 'N' terminal on the sensor.
- For Relay Function (Optional): If you intend to control a light directly, connect the Live wire from the light fixture to the 'L' terminal of the sensor's relay output, and the Neutral wire from the light fixture to the 'N' terminal of the sensor's relay output. The sensor's internal relay will switch the power to the light.
- Secure all wire connections firmly.
- Restore power at the circuit breaker.

4. App Setup and Operation
4.1 Pairing with Tuya Smart Life App
- Download the "Tuya Smart" or "Smart Life" app from your mobile device's app store (iOS or Android).
- Register or log in to your account.
- Ensure your mobile device is connected to a 2.4GHz Wi-Fi network.
- Power on the sensor. The indicator light should blink rapidly, indicating it's in pairing mode. If not, refer to the troubleshooting section for reset instructions.
- In the app, tap the "+" icon to add a device.
- Select "Sensor" or "Presence Sensor" from the device list.
- Follow the on-screen instructions to connect the sensor to your Wi-Fi network.
- Once successfully paired, you can rename the device and access its settings.
4.2 Sensor Settings in the App
The Tuya Smart app provides extensive customization options for the sensor's performance.


Common Parameters:
- Sensitivity: Adjusts the sensor's responsiveness to motion. Higher values increase sensitivity.
- Departure Delay: Sets the time duration after which the sensor reports "no presence" once movement ceases.
- Detection Range: Defines the maximum distance for presence detection.
- Entry Sensitivity: Fine-tunes sensitivity for initial entry detection.
- Entry Filter Time: Sets a delay to filter out brief, insignificant entries.
- Entry Distance Indentation: Adjusts the effective detection area from the sensor's center.
- Shield Range: Defines a minimum distance within which detection is ignored.
- Block Time: Sets a period during which the sensor will not re-trigger after an event.
Control Parameters (Relay Function):
The sensor's 16A relay can be configured with three modes:
- Standard (Cloud Linkage): The relay can be remotely controlled (ON/OFF) via the Tuya Smart app.
- Local (Automatic): The relay automatically turns ON when presence is detected and OFF when no presence is detected.
- Not Support (Disable Relay): The relay function is disabled. The device operates solely as a sensor.

Illuminance Monitoring:
The sensor includes an illuminance monitor. You can set an "Illuminance Threshold" in the app. This allows for smart scene linkage, where lights can automatically turn ON/OFF based on ambient brightness and presence detection.

4.3 Smart Scene Linkage
Leverage the Tuya Smart app's automation features to create smart scenes. For example:
- Automated Lighting: If presence is detected AND ambient light is below a certain threshold, turn on smart lights.
- Security Alerts: If presence is detected in an unoccupied area during specific hours, send a notification or trigger an alarm.
- Energy Saving: If no presence is detected for a set period, turn off lights or adjust thermostat settings.

5. Maintenance
The WenzhiIoT Smart Presence Sensor requires minimal maintenance.
- Cleaning: Gently wipe the sensor's surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
- Firmware Updates: Periodically check the Tuya Smart app for available firmware updates to ensure optimal performance and access to new features.
- Environmental Conditions: Ensure the sensor remains within its specified operating temperature and humidity ranges.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sensor not detecting presence. |
|
|
| False detections or sensor too sensitive. |
|
|
| Cannot pair with Tuya Smart app. |
|
|
| Relay not controlling light. |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Brand | WenzhiIoT |
| Model Number | MTG276-WF-RL-24G |
| Color | Circular |
| Power Source | Corded Electric (AC 85-265V) |
| Maximum Range | 10 meters |
| Mounting Type | Ceiling Mount (also wall mountable) |
| Frequency | 24 GHz (MmWave Radar) |
| Item Dimensions (D x W x H) | 4.57"D x 4.57"W x 1.3"H |
| Compatible Devices | Smart Home Devices, Smart Home Hubs, Lighting Controls (via Tuya Smart Life App) |
| Built-In Media | Double-sided tape, Expansion screws, Manual, Presence Sensor |
| Relay Output | 16A |
8. Warranty and Support
WenzhiIoT products are designed for reliability and performance. For warranty information and technical support, please refer to the official WenzhiIoT website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Contact Information: Please visit the WenzhiIoT Store on Amazon or their official website for the latest support details.