1. Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Edifier M60 Multimedia Speaker. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Image 1: Edifier M60 Multimedia Speakers (White)
2. Package Contents
Verify that all items are present in the package:
- M60 Speaker (Pair) x1
- Power Cable x1
- Speaker Connection Cable x1
- Aluminum Speaker Stand (Pair) x1
- 3.5mm-3.5mm Audio Cable x1
- USB-C Cable x1
- Quick Start Guide x1
- Important Safety Information x1
Image 2: Edifier M60 Package Contents
3. Setup
3.1 Speaker Placement
Place the speakers on a stable, flat surface. For optimal sound, position them at ear level and equidistant from your listening position. The included aluminum speaker stands are designed to angle the speakers at 15 degrees, reducing desktop reflections and optimizing the listening experience.
Image 3: Optimal Speaker Placement with Stands
3.2 Connecting the Speakers
- Connect the active speaker (with controls and inputs) to the passive speaker using the provided speaker connection cable.
- Connect the power cable to the active speaker and then to a power outlet.
Image 4: Rear Panel Connections
3.3 Input Connections
The M60 speakers support multiple input methods:
- USB-C Input: Connect to a computer or other USB-C audio source using the provided USB-C cable.
- AUX Input: Connect to devices with a 3.5mm audio output (e.g., smartphones, tablets, turntables) using the provided 3.5mm audio cable.
- Bluetooth: For wireless connection, refer to the Bluetooth Pairing section below.
Image 5: Connecting USB-C and AUX Cables
4. Operating Instructions
4.1 Power On/Off
Once connected to power, the speakers will automatically power on. To power off, press and hold the power button on the top panel.
4.2 Input Selection
Cycle through available inputs (USB-C, AUX, Bluetooth) by tapping the input selection button on the top panel or using the EDIFIER ConneX app.
4.3 Volume Control
Adjust the volume using the touch-sensitive controls on the top panel (plus and minus symbols) or through the EDIFIER ConneX app.
Image 6: Top Panel Touch Controls
4.4 Bluetooth Pairing
- Select Bluetooth input on the speaker. The Bluetooth indicator will flash.
- On your device (e.g., smartphone, tablet), enable Bluetooth and search for "EDIFIER M60".
- Select "EDIFIER M60" to pair. Once paired, the indicator will glow steadily.
- The M60 supports Bluetooth V5.3 with LDAC codec for high-resolution audio streaming (up to 24-bit/96kHz from Android 8.0+ devices).
Image 7: Bluetooth Connectivity
4.5 EDIFIER ConneX App
Download the EDIFIER ConneX mobile app from your device's app store to access additional features, including:
- Playback control
- Sound effect switching and customization (e.g., Music, Monitor, Game, Movie, Customized)
- Touch panel backlight settings
- User manual access and other settings
Image 8: EDIFIER ConneX App Interface
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker surfaces. Do not use liquid cleaners or aerosols.
- Storage: Store the speakers in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Moisture: The speakers are not waterproof. Keep them away from water and high humidity.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound |
|
|
| Distorted sound |
|
|
| Bluetooth connection issues |
|
|
If the problem persists, please contact Edifier customer support.
7. Specifications
| Model | M60 |
| Total Power Output | 66W RMS |
| Drivers | 1-inch Silk Dome Tweeter, 3-inch Long-Throw Aluminum Mid-Bass Driver |
| Connectivity | Bluetooth V5.3 (LDAC), USB-C, AUX (3.5mm) |
| Dimensions (W x H x D) | 38.4 cm x 14.8 cm x 32.5 cm |
| Color | White |
| Manufacturer Model Number | EDF100074 |
8. Warranty and Support
For warranty information and technical support, please refer to the official Edifier website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.
Official Edifier Website: www.edifier.com
9. Important Safety Information
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
