Introduction
This manual provides essential instructions for the safe and effective use of your AUKTWE T02 Electric Water Guns. Please read this manual thoroughly before operation and retain it for future reference. The AUKTWE T02 Electric Water Gun features a light-up design, automatic firing, and a large capacity water tank, designed for outdoor water activities.
Key Features:
- Cool Light-Up: Integrated light-up feature for enhanced visibility and fun.
- Large Capacity Battery: Rechargeable battery hidden in the scope for extended playtime.
- Manual and Automatic Mode Switching: Offers versatile firing options.
- Large Water Tank: Designed for prolonged use without frequent refills.
- High-Quality ABS Material: Constructed from durable and safe ABS material.
Safety Information
WARNING: CHOKING HAZARD -- Small parts. Not for children under 3 years.
- Do not aim at eyes or face.
- Use only clean tap water.
- Adult supervision is recommended for children.
- Keep away from heat sources and open flames.
- Do not submerge the electronic components in water.
What's in the Box
Each AUKTWE T02 Electric Water Gun 2-Pack includes the following components:
- 2 x Electric Water Guns
- 2 x Light-Up Muzzles
- 2 x Battery Packs
- 2 x USB Chargers
- 2 x Type-C Chargers

Setup Instructions
- Charge the Battery:
Locate the battery pack. Connect the battery pack to the provided Type-C charger and then to a USB power source. The indicator light on the charger will show charging status. Ensure the battery is fully charged before first use for optimal performance. The battery is designed to be hidden within the scope attachment.

Image: Components of the AUKTWE T02 Electric Water Gun. This image illustrates the various parts of the water gun, including the external battery pack, the light-up muzzle with its Type-C charging port, and the mechanism for changing the water tank. - Fill the Water Tank:
Press the button to release the water tank from the bottom of the water gun. Open the water tank cap and fill it with clean tap water. Close the cap securely to prevent leaks. The water tank has a capacity of 500cc, allowing for over 450 rounds of shooting.
- Install Water Tank:
Align the filled water tank with the bottom of the water gun and push it firmly until it clicks into place. Ensure it is securely attached.
- Attach Scope/Battery Pack:
Attach the scope, which houses the battery, to the top rail of the water gun. Ensure the scope logo is facing the correct direction to avoid reversing it. This step also connects the battery to the water gun's internal system.

Image: Four steps to prepare the water gun for use. This visual guide demonstrates filling the water tank, ensuring the scope is correctly oriented, attaching the water tank to the gun, and pressing a button to turn on the light-up feature.
Operating Instructions
- Power On/Activate Light:
Press the designated button (often located near the muzzle or trigger) to activate the light-up feature and power on the water gun. This button typically also initiates the firing mechanism.
- Select Firing Mode:
The AUKTWE T02 supports both manual and automatic firing modes. The specific method for switching between modes may vary; refer to the physical controls on your water gun. Automatic mode provides continuous firing by holding the trigger, while manual mode may require individual presses.
- Firing the Water Gun:
Point the water gun safely away from faces and eyes. Press and hold the trigger for automatic firing. The water gun can achieve a shooting range of 28-32 feet.

Image: A blue AUKTWE T02 Electric Water Gun in action. This image demonstrates the water gun firing a stream of water, emphasizing its light-up muzzle and indicating a shooting range of up to 28 feet, with an inset showing the auto mechanical motion.
Maintenance
- Cleaning: After each use, empty any remaining water from the tank. Wipe the exterior of the water gun with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Drying: Allow all components to air dry completely before storage to prevent mold or mildew.
- Storage: Store the water gun in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the battery is fully charged before long-term storage and recharge periodically if not used for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water gun not firing or weak stream | Low battery; Empty water tank; Water tank not properly installed; Air in the system (missing seal) | Charge the battery; Refill water tank; Reinstall water tank securely; Check for proper seals and connections. |
| Light-up feature not working | Low battery; Light-up muzzle not properly attached | Charge the battery; Ensure the light-up muzzle is securely twisted onto the gun. |
| Water leakage | Water tank cap not closed properly; Water tank not securely installed; Damaged seal | Ensure water tank cap is tightly closed; Reinstall water tank; Inspect seals for damage and contact support if necessary. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 10.8 x 10.6 x 5 inches |
| Item Weight | 1.76 pounds |
| Item Model Number | T02 |
| Manufacturer Recommended Age | 8 years and up |
| Batteries | 1 Lithium Ion battery required (included) |
| Material | High-Quality ABS |
| Water Tank Capacity | 500cc (approx. 450+ rounds) |
| Shooting Range | 28-32 feet |
Warranty & Support
AUKTWE is committed to providing high-quality products and customer satisfaction. Your AUKTWE T02 Electric Water Gun comes with the following support:
- 30-Day Return Policy: Enjoy a 30-day no-reason return policy.
- 1-Year Free Replacement: We offer a 1-year free replacement for manufacturing defects.
- Lifetime Support: Lifetime customer support and solutions for any product-related inquiries.
- 24-Hour Response: Quick response to inquiries via phone or email.
For support or inquiries, please visit the official AUKTWE Store: AUKTWE Store on Amazon





