Introduction
Thank you for choosing the EverBrite Headlamp Flashlight. This super bright LED headlamp is designed for various activities such as camping, running, hiking, and automotive repairs, offering versatile lighting with its 4 modes, zoomable lens, and motion sensor. This manual provides detailed instructions for safe and effective use, setup, operation, and maintenance of your headlamp.
Figure 1: EverBrite Headlamp Flashlight (Blue model) with charging cable and motion sensor illustration.
Safety Information
- Do not look directly into the LED light when it is on, as it can cause temporary vision impairment.
- Keep out of reach of children.
- Do not disassemble the headlamp; this will void the warranty and may cause damage.
- Use only the provided USB cable for charging.
- Avoid exposing the headlamp to extreme temperatures or direct sunlight for prolonged periods.
- Ensure the charging port cover is securely closed when not charging to maintain waterproof integrity.
What's in the Box
- EverBrite Headlamp Flashlight
- USB Charging Cable
Setup
1. Charging the Headlamp
Before first use, fully charge the headlamp. The headlamp features a built-in 1200 mAh rechargeable battery.
- Locate the USB charging port on the headlamp.
- Connect the provided USB cable to the headlamp's charging port.
- Connect the other end of the USB cable to a compatible USB power source (e.g., power bank, computer, car charger).
- The power indicator lights on the lamp will show the charging progress. When all lights are solid, the headlamp is fully charged.
- Charging time is approximately 2.5 to 3 hours. The headlamp will not operate while charging.
Figure 2: Battery indicator and charging port. The four blue dots indicate battery levels: 25%, 50%, 75%, and 100% charged.
Figure 3: Quick and easy charging via power bank, computer, or car charger.
2. Adjusting the Headband
The elastic headband is adjustable to fit various head sizes comfortably. Simply slide the buckles on either side of the headband to tighten or loosen it for a secure fit.
Operating Instructions
1. Power and Mode Selection
The headlamp features a main ON/OFF switch to cycle through its lighting modes.
- Short Press: Press the ON/OFF switch to cycle through the 4 white lighting modes:
- High Light Mode (600 Lumens)
- Medium Light Mode (250 Lumens)
- Low Light Mode (80 Lumens)
- Strobe Mode
- Memory Function: After 8 seconds of use in any mode, turning the headlamp off and then back on will instantly resume the last used setting. This eliminates the need to cycle through all modes again.
Figure 4: Dual switch design with ON/OFF switch and Induction Function Switch. Displays High, Medium, Low, and Strobe light modes.
Figure 5: Four lighting modes: 600LM (2H runtime), 250LM (3.5H runtime), 80LM (10H runtime), and Strobe Mode.
Video 1: Demonstration of the headlamp's 4 modes, motion sensor, memory function, and zoomable feature. This video shows how to switch between high, medium, low, and strobe light modes, activate the motion sensor for hands-free operation, and adjust the beam from spotlight to floodlight.
3. Motion Sensor Activation
The motion sensor allows for convenient, hands-free operation, perfect when your hands are dirty, wet, or gloved.
- Activate: In any light mode, press and hold the dedicated sensor switch for 3 seconds. A small indicator light will confirm activation.
- Operate: Once activated, simply wave your hand within 15cm (approximately 6 inches) of the headlamp to turn the light ON or OFF.
- Deactivate: Press and hold the sensor switch again for 3 seconds to turn off the sensor function.
Figure 8: Motion sensor activation by holding the switch for 3 seconds, with a sensing distance of 15cm. Illustrates waving a hand to control the light.
Figure 9: User demonstrating the motion sensor feature, showing how a simple hand wave can turn the light on or off.
4. Tilt Adjustment
The headlamp can be tilted up to 75° to direct light precisely where needed. The durable card-wheel design ensures the chosen angle remains locked in place during use.
Figure 10: The headlamp can be tilted up to 75 degrees for precise illumination, secured by a card-wheel design.
Maintenance
- Cleaning: Wipe the headlamp with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the headlamp in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery every 3-6 months to maintain battery health.
- Water Resistance: The headlamp has an IPX4 waterproof rating, meaning it is resistant to splashing water from any direction. It is not designed for submersion. Ensure the charging port cover is sealed when not charging.
Figure 11: Sturdy lamp body features a durable ABS construction, passed a one-meter drop test, and achieved an IPX4 waterproof rating, making it corrosion-resistant and shockproof.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headlamp does not turn on. | Battery is depleted. | Charge the headlamp fully. |
| Light is dim or flickers. | Low battery. | Recharge the headlamp. |
| Motion sensor not responding. | Sensor not activated or obstruction. | Ensure sensor mode is activated (hold sensor switch for 3s). Clear any obstructions in front of the sensor. Ensure hand is within 15cm. |
| Headlamp not charging. | Faulty cable or power source. | Try a different USB cable or power adapter. Ensure connections are secure. |
Specifications
| Feature | Detail |
|---|---|
| Brand | EverBrite |
| Model Number | E021074AE |
| Light Source Type | LED |
| Brightness | 600 Lumens (Max) |
| Lighting Modes | High, Medium, Low, Strobe |
| Special Features | Adjustable Focus (Zoomable), Adjustable Light Modes, Adjustable Strap, Motion Sensor, Rechargeable, Memory Function |
| Tilt Adjustment | Up to 75° |
| Power Source | Rechargeable (Built-in Lithium Ion Battery) |
| Battery Capacity | 1200 mAh |
| Runtime | Up to 10 hours (Low Light Mode) |
| Water Resistance Level | IPX4 (Water Resistant) |
| Material | Metal, Plastic (ABS Shell) |
| Product Dimensions | 2.11"D x 3.35"W x 3.94"H |
| Item Weight | 5.6 ounces |
Warranty and Support
EverBrite products are manufactured with quality and durability in mind. For any questions, concerns, or warranty claims regarding your EverBrite Headlamp Flashlight, please contact the seller or EverBrite customer support. Please refer to your purchase documentation for specific warranty terms and contact information.
You can also visit the official EverBrite store for more information and support: EverBrite Store on Amazon
