1. Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Ensure all parts are present and undamaged before assembly.
- Do not overtighten screws during assembly to avoid damaging components.
- Place the assembled furniture on a flat, stable surface.
- Do not exceed the maximum weight capacity for the stool (220 lb) and table (top: 121.3 lb, middle shelf: 44.1 lb).
- Keep children away from the assembly area.
- Regularly check all fasteners to ensure they remain tight.
- Wipe with a dry cloth for cleaning. Avoid harsh chemicals.
2. Components List
Verify all components are included before beginning assembly. Refer to the included hardware pack for specific part identifiers.
2.1 Rolling Stool Components
- Seat cushion with backrest attachment
- Gas lift cylinder
- Base with five-star design
- Five universal wheels
- Footrest ring
- Assembly hardware (screws, washers, Allen key)
2.2 Bar Table Components
- Tabletop (square)
- Middle shelf
- Four metal legs
- Metal crossbar supports
- Assembly hardware (screws, washers, Allen key)
3. Setup and Assembly Instructions
Follow these steps carefully for proper assembly of your HOOBRO bundle.
3.1 Rolling Stool Assembly
- Insert the five universal wheels into the openings at the end of each leg of the five-star base until they click securely into place.
- Place the gas lift cylinder into the center hole of the five-star base.
- Slide the footrest ring over the gas lift cylinder.
- Attach the backrest to the seat cushion using the provided screws.
- Align the assembled seat and backrest onto the top of the gas lift cylinder. Press down firmly to secure.

Figure 1: Rolling Stool Dimensions and Assembly Overview

Figure 2: Ergonomic Backrest and Seat Support
3.2 Bar Table Assembly
- Attach the four metal legs to the tabletop using the provided screws. Ensure they are securely fastened but do not overtighten.
- Connect the middle metal crossbar supports between the legs, forming the trapezoidal structure.
- Install the middle shelf onto the designated supports between the legs.
- Ensure all screws are tightened for stability.

Figure 3: Bar Table Dimensions and Structure

Figure 4: Bar Table Middle Shelf Functionality
4. Operating Instructions
4.1 Adjusting Stool Height
To adjust the height of the rolling stool, locate the lever under the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. The stool height can be adjusted between 18.1 inches and 24 inches.

Figure 5: Stool Height Adjustment in Use
4.2 Moving the Stool
The stool is equipped with five universal wheels for smooth movement and 360-degree rotation. It can be easily rolled across various floor surfaces, including carpets, to reposition as needed.
4.3 Using the Bar Table
The bar table features a sturdy tabletop and a convenient middle shelf. The tabletop is suitable for dining, working, or holding beverages. The middle shelf provides additional storage for items such as books, snacks, or decorative pieces.

Figure 6: Bar Table and Stool Bundle in Use

Figure 7: Multi-Scene Application of Rolling Stool
5. Maintenance and Care
Proper care will extend the life and appearance of your HOOBRO furniture.
- Cleaning: Wipe surfaces with a dry, soft cloth. For stubborn marks, a slightly damp cloth followed by a dry cloth can be used. Avoid abrasive cleaners or harsh chemicals.
- Inspection: Periodically check all screws and fasteners to ensure they are tight. Retighten as necessary to maintain stability.
- Stool Upholstery: The PU leather seat is easy to clean. Wipe spills immediately with a dry cloth.
- Tabletop: Protect the tabletop from excessive moisture and heat. Use coasters for drinks and placemats for hot items.

Figure 8: Bar Table Retro Panel Detail
6. Troubleshooting
Common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool does not adjust height. | Gas lift cylinder not properly engaged or damaged. | Ensure the gas lift cylinder is fully inserted into the base and seat mechanism. If still not working, contact customer support. |
| Stool wheels do not roll smoothly. | Wheels are dirty or obstructed. Wheels not fully inserted. | Clean wheels of debris. Ensure wheels are fully pushed into the base. |
| Table or stool feels wobbly. | Screws are loose. Uneven floor surface. | Check and tighten all assembly screws. Move the furniture to a level surface. |
| Missing parts during assembly. | Packaging error. | Contact HOOBRO customer support with your purchase details. |
7. Product Specifications
7.1 Rolling Stool
- Model: SB01BY01G1 (part of bundle)
- Material: PU Leather, High Elastic Sponge, Metal
- Adjustable Height: 18.1" - 24" (46 cm - 61 cm)
- Seat Diameter: 13" (33 cm)
- Backrest Width: 13.2" (33.5 cm)
- Weight Capacity: 220 lb (100 kg)
- Features: 360° Swivel, 5 Universal Wheels, Ergonomic Backrest, Footrest
7.2 Bar Table
- Model: BF51BT01 (part of bundle)
- Material: Particleboard, Metal Frame
- Overall Dimensions: 21.7" L x 21.7" W x 36.6" H (55 cm L x 55 cm W x 93 cm H)
- Tabletop Weight Capacity: 121.3 lb (55 kg)
- Middle Shelf Weight Capacity: 44.1 lb (20 kg)
- Features: 2-Tier Design, Trapezoidal Structure
8. Warranty and Customer Support
HOOBRO provides a standard limited warranty for this product against defects in materials and workmanship under normal use. Please refer to your purchase documentation for specific warranty terms and duration.
For technical assistance, missing parts, or warranty claims, please contact HOOBRO customer support:
- Website: www.hoobro.com (for contact information)
- Email: Refer to your product packaging or purchase confirmation for the most current email address.
- Phone: Refer to your product packaging or HOOBRO website for the most current phone number.
Please have your model number (SB01BY01G1-BF51BT01) and purchase date ready when contacting support.