SHALL Portable Car Jump Starter and Air Compressor

Introduction

This manual provides detailed instructions for the safe and effective use of your SHALL Portable Car Jump Starter with Air Compressor. This multi-functional device combines a car jump starter, tire inflator, tire pressure detector, emergency light, and power bank into one portable unit. Please read this manual thoroughly before operation and retain it for future reference.

Image: The SHALL Portable Car Jump Starter and Air Compressor, showcasing its compact design and various ports.

Safety Information

Always observe the following safety precautions to prevent injury or damage to the device:

• Do not expose the device to rain or wet conditions.
• Do not operate the device if it has been dropped or damaged.
• Keep out of reach of children.
• Ensure proper ventilation during use and charging.
• Do not disassemble the unit. Refer all servicing to qualified personnel.
• Avoid short-circuiting the jump starter clamps.
• Do not use the air compressor continuously for extended periods without allowing it to cool down.
• The device incorporates 9 safety features including protection against short circuits, over-temperature, over-charge, and over-discharge.

Image: Diagram illustrating the 9 safety protection features of the device, including reverse polarity, short circuit, over-charge, over-discharge, over-temperature, low temperature, reverse charge, over current, and low voltage protection.

Setup

Package Contents

Verify that all items are present in the package:

• Car Jump Starter (1 unit)
• Booster Cable Clamp (1 set)
• Air Tube (1 unit)
• Ball Inflation Needle (1 unit)
• Swimming Ring Nozzle (1 unit)
• Cigarette Lighter Interface Cable (1 unit)
• Nozzle (2 units)
• Type-C Charge Cable (1 unit)
• User Manual (1 unit)

Image: The product packaging, showing the SHALL brand and key features like start, mobile power, lighting, air pump, electricity display, and emergency power start.

Image: The back of the product box, detailing product features and specifications including model number SH112013 and UPC 762983170926.

Image: The side of the product box, displaying manufacturer information and compliance marks like CE, FC, and RoHS.

Product Overview

Familiarize yourself with the components and controls of the device:

Image: An overview of the SHALL Car Jump Starter with Air Compressor, highlighting its multi-functionality.

Image: A detailed diagram showing the device's display, buttons (Power Switch, Switch Vehicle Mode, Switch Units, Increase/Decrease Pressure), and ports (USB output, Type-C input, LED lighting, Inflator interface, Start output port).

Charging the Device

Before first use, fully charge the jump starter. It is recommended to recharge the device every 3 months to maintain battery health, especially during long standby periods (up to one year).

1. Connect the provided Type-C charge cable to the device's Type-C input port.
2. Connect the other end of the Type-C cable to a suitable USB power adapter (not included) or a car cigarette lighter interface cable.
3. The display will indicate charging status. Charge until the battery indicator shows full.

Operating Instructions

Jump Starting a Vehicle

This jump starter is designed for 12V vehicles with up to 5.0L gas or 3.0L diesel engines. It operates effectively in temperatures from -4°F to 140°F (-20°C to 60°C).

1. Connect Clamps: Connect the red (+) clamp to the positive terminal of the vehicle battery and the black (-) clamp to the negative terminal.
2. Connect to Jump Starter: Insert the booster cable clamp connector into the jump starter's dedicated output port. Ensure a secure connection.
3. Start Engine: Enter the vehicle and start the engine. If the engine does not start immediately, wait 30 seconds before attempting again. Do not crank for more than 3 seconds per attempt.
4. Remove Clamps: Once the vehicle starts, immediately remove the booster cable clamp from the jump starter, then disconnect the black (-) clamp from the vehicle battery, followed by the red (+) clamp.

Image: The jump starter connected to a car battery, illustrating the process of safely starting a vehicle.

Image: A visual guide showing the four steps to jump start a car: connect positive/negative terminals, connect cable clip to jump starter, start engine, and remove clamps.

Image: A chart indicating the jump starter's compatibility with various engine displacements for gas and diesel vehicles.

Using the Air Compressor

The integrated air compressor can inflate tires up to 150 PSI and is suitable for various items including car tires, bicycle tires, motorcycle tires, swimming rings, kayaks, and most balls. It features real-time pressure detection and preset inflation functions.

1. Connect Air Tube: Attach the detachable air tube to the inflator port on the device. Select the appropriate nozzle adapter for the item to be inflated and connect it to the air tube.
2. Power On & Select Mode: Turn on the device. Use the "Switch Vehicle Mode" button to select the desired inflation mode (e.g., car, motorcycle, bicycle, ball).
3. Adjust Pressure: Use the "+" and "-" buttons to set the target pressure. The LCD display will show the current and target pressure. You can also switch units (Bar, Psi, Kpa, Kg/cm²) using the "Switch Units" button.
4. Start Inflation: Connect the nozzle to the item's valve. Long press the start button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
5. Continuous Power: For prolonged inflation tasks, connect the device to your car's cigarette lighter using the provided interface cable for continuous and stable power.

Image: The device's air compressor connected to a car tire, demonstrating its inflation capability.

Image: A visual guide showing the four steps to inflate a tire: connect air tube, start machine and select mode, adjust pressure, and connect nozzle to start inflation.

Image: Examples of items that can be inflated with the air compressor, including motorcycles, bicycles, balls, and kayaks, along with various nozzle adapters.

Using as a Power Bank

The device can serve as a power bank to charge your digital devices.

• Connect your device's charging cable to the USB output port (5V/2A) on the jump starter.
• The jump starter will begin charging your device.

Image: The jump starter functioning as a power bank, charging an iPad, iPhone, and Android phone via its USB output port.

Image: A visual representation of the portable power bank feature, showing Type-C input (5V/2A) and USB output (5V/2A) for charging various electronic devices.

Emergency Lighting

The device includes an emergency light with multiple modes.

• Press the light button to cycle through modes: Flashlight (steady on), Strobe Light, and SOS Light.
• Press again to turn off the light.

Image: The device's emergency light illuminating a campsite, demonstrating its flashlight, strobe, and SOS light functions.

Image: A visual representation of the 3-in-1 emergency light feature, highlighting flashlight, strobe light, and SOS light modes.

Maintenance

• Clean the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Recharge the device at least once every three months to maintain optimal battery performance, even if not in use.
• Inspect cables and clamps for any damage before each use.

Troubleshooting

Specifications

Image: The device operating effectively across a wide temperature range, from -4°F to 140°F.

Warranty and Support

For warranty information or technical support, please contact the manufacturer or your retailer. Keep your purchase receipt as proof of purchase.

Manufacturer: Zhejiang Hangshuai Technology Co., Ltd

UPC: 762983170926