GAVASTO B0D91YFQKK

GAVASTO Touchless Vacuum Automatic Dustpan User Manual

Model: Touchless Vacuum Automatic Dustpan (B0D91YFQKK)

1. Introduction

Thank you for choosing the GAVASTO Touchless Vacuum Automatic Dustpan. This device is designed to simplify floor cleaning by automatically collecting debris with its powerful suction and intelligent sensors. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your vacuum.

GAVASTO Touchless Vacuum Automatic Dustpan with broom and hose attachment

Image 1.1: The GAVASTO Touchless Vacuum Automatic Dustpan, shown with a broom sweeping debris towards its intake and a flexible hose attachment for detailed cleaning.

2. Safety Instructions

  • Read all instructions before using the appliance.
  • Do not operate the vacuum with a damaged cord or plug. If damaged, contact customer support.
  • Do not use to pick up flammable or combustible liquids, hot ashes, or sharp objects.
  • Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
  • Unplug from outlet when not in use and before cleaning or servicing.
  • This appliance is for indoor use only.
  • Do not allow to be used as a toy. Close attention is necessary when used by or near children.

3. Package Contents

Verify that all components are present:

  • GAVASTO Touchless Vacuum Automatic Dustpan Unit
  • Flexible Hose Attachment with Nozzle
  • User Manual

4. Setup

  1. Unpack: Carefully remove all components from the packaging.
  2. Placement: Place the vacuum unit in a desired location on a flat, stable surface, preferably against a wall in an area where debris accumulates, such as a kitchen, entryway, or salon.
  3. Power Connection: Plug the power cord into a standard electrical outlet.
Three steps to set up and use the GAVASTO vacuum: 1. Place cleaner in desired location. 2. Choose either Manual or Auto mode. 3. In Auto mode, sweep directly up to the front of cleaner.

Image 4.1: Visual guide demonstrating the three initial steps for using the vacuum: placing the unit, selecting a mode, and sweeping debris towards it.

5. Operating Instructions

5.1 Powering On/Off

Press the power button located on the top panel of the unit to turn the vacuum on or off.

5.2 Cleaning Modes

The GAVASTO vacuum offers three operational modes:

  • Auto-Sensing Mode: The device automatically activates when its infrared sensor detects debris approaching the intake.
  • Tap Mode: Sweep debris near the device, then gently tap the front lower part of the unit with a broom to initiate suction.
  • Manual Mode: Sweep debris close to the unit and press the manual activation button on the control panel to begin suction.
Diagram showing the three operating modes: Auto-Sensing Mode where the device activates automatically, Tap Mode where a broom tap starts suction, and Manual Mode where a button press starts suction.

Image 5.1: Illustration of the Auto-Sensing, Tap, and Manual operating modes for debris collection.

5.3 Dual Clean Modes

The vacuum cleaner provides two primary cleaning functionalities:

  • Floor Mode: For sweeping and collecting debris directly from the ground into the main intake.
  • Tool Mode: Utilizes the handheld nozzle and flexible hose for targeted cleaning.

5.4 Using the Tool Mode

To use the tool mode:

  1. Locate the flexible hose attachment on the side of the unit.
  2. Remove the hose and attach the nozzle.
  3. Activate the vacuum in Manual mode or select the appropriate setting for hose use (refer to control panel icons).
  4. Use the nozzle to clean hard-to-reach areas such as sofas, tables, corners, crevices, and stairs.
Woman using the flexible hose attachment of the GAVASTO vacuum to clean debris from a sofa.

Image 5.2: A user demonstrating the tool mode, cleaning a sofa with the handheld nozzle.

Three images showing the tool mode being used to clean a window gap, carpeted stairs, and a sofa.

Image 5.3: Examples of using the tool mode for cleaning various surfaces like window gaps, stairs, and upholstery.

6. Maintenance

6.1 Emptying the Dustbin

The GAVASTO vacuum features a 7-quart capacity bagless dustbin. Empty the dustbin regularly to maintain optimal suction power.

  1. Ensure the vacuum is unplugged before emptying.
  2. Locate the dustbin release mechanism (usually a latch or button).
  3. Carefully remove the dustbin from the unit.
  4. Empty contents into a trash receptacle. The dustbin is designed for easy, non-stick debris removal.
  5. Reinsert the dustbin securely until it clicks into place.
Comparison image showing the GAVASTO cleaner's fully empty, non-stick debris bin being emptied of hair and dust, next to a diagram of another cleaner's bin with internal cylinders where hair clings.

Image 6.1: Demonstration of the GAVASTO vacuum's easy-to-empty, non-stick dustbin design.

6.2 Filter Cleaning and Replacement

The vacuum is equipped with a 5-layer high-efficiency filtration system and a 4-layer pre-motor filter to trap dust and debris, returning clean air. Regular cleaning of filters is crucial for performance.

  1. Access Filters: Refer to the diagram below to locate the filter assembly within the dustbin or main unit.
  2. Clean Filters: Gently tap filters to remove loose dust. For thorough cleaning, rinse filters under cool running water. Ensure filters are completely dry before reinstallation. Do not use detergents or hot water.
  3. Pre-Motor Filter: The 4-layer pre-motor filter protects the motor from hair and debris, extending the vacuum's lifespan. Clean this filter regularly.
  4. Replacement: Filters should be replaced periodically, depending on usage, to maintain filtration efficiency. Consult the manufacturer's website for replacement parts.
Diagram illustrating the 5-layer filtration system with HEPA and sponge filters, showing air flow through the vacuum.

Image 6.2: Detailed view of the 5-layer filtration system, including HEPA and sponge filters, and the air purification process.

Diagram showing a 4-stage filtration system protecting a brushless motor, compared to a less protected motor, highlighting extended service life.

Image 6.3: Illustration of the 4-stage pre-motor filtration designed to protect the brushless motor and extend its service life.

7. Troubleshooting

ProblemPossible CauseSolution
Vacuum does not turn on.No power supply.Check if the power cord is securely plugged into a working outlet.
Low suction power.Full dustbin or clogged filters.Empty the dustbin. Clean or replace the filters as per maintenance instructions.
Auto-Sensing mode not activating.Sensor obstructed or dirty.Clean the infrared sensor window. Ensure sufficient light for sensor operation.
Unusual noise during operation.Obstruction in intake or hose.Unplug the unit and check for any blockages in the main intake or hose attachment.

8. Specifications

FeatureDetail
BrandGAVASTO
Model NameTouchless Vacuum Automatic Dustpan
Model NumberB0D91YFQKK
Wattage1500 Watts
Motor Horsepower2.01 horsepower
Filter TypeHEPA Filter (5-layer filtration system)
Dustbin Capacity7 Quarts
Dimensions (L x W x H)16.5" x 12.5" x 7"
Item Weight10 pounds
Control MethodTouch, Push Button, Infrared
Number of Power Levels3
Connectivity TechnologyInfrared
Special Features4-layer pre-motor filter, Bagless, Portable

9. Warranty and Support

The GAVASTO Touchless Vacuum Automatic Dustpan comes with a 5-year warranty. For any issues, questions, or support needs, please contact GAVASTO customer service. We are committed to providing satisfactory after-sales service.

Contact information can typically be found on the product packaging or the official GAVASTO website.

© 2025 GAVASTO. All rights reserved.

Documents - GAVASTO – B0D91YFQKK

no relevant documents

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.