1. Product Overview
The upHere gaming up1KC4 ARGB CPU Air Cooler is engineered for efficient heat dissipation, ensuring optimal performance for your CPU. It features a single tower design with 4 pure copper heat pipes, a high-performance 120mm PWM fan, and supports 5V ARGB synchronization for customizable lighting effects.
Key features include:
- Broad Compatibility: Supports Intel LGA2011/2066/1700 and AMD AM5/AM4/AM3/AM2/AM3+/AM2+/FM2/FM1 sockets.
- Efficient Heat Transfer: Four Φ6mm pure copper heat pipes make direct contact with the CPU for maximum heat transfer.
- RAM Clearance: Designed with 100% RAM clearance for hassle-free installation.
- Quiet & Powerful Fan: A 120mm PWM fan optimizes airflow, reducing noise to 26 dB(A) while providing efficient cooling.
- ARGB Lighting: Supports 5V ARGB synchronization for dynamic lighting effects with compatible motherboards.
- Easy Installation: Simplified installation process allows mounting without removing the fan.
2. Setup and Installation
Before beginning installation, ensure your system is powered off and disconnected from the power source. Refer to your motherboard manual for specific CPU socket preparation.
2.1. Package Contents
Verify that all components are present in the package:
- Radiator (1)
- Accessory Bag (1)
- Thermal Paste (1)
- Screwdriver (1)
- User Manual (1)
2.2. CPU Socket Compatibility
This cooler supports the following CPU sockets:
- Intel: LGA2011, LGA2066, LGA1700, LGA1200, LGA115X (1150, 1151, 1155, 1156), LGA1366
- AMD: AM5, AM4, AM3, AM2, AM3+, AM2+, FM2, FM1
Image: AMD/Intel Support. This diagram illustrates the different mounting brackets and screws required for various Intel (LGA2011/2066/1700/1200/115X/1366) and AMD (AM5/AM4/AM3/AM2/AM3+/AM2+/FM2/FM1) CPU sockets.
2.3. Installation Steps
- Prepare Motherboard: Install the appropriate backplate (if required for your socket type) and standoffs onto your motherboard.
- Apply Thermal Paste: Apply a small, pea-sized amount of the included thermal paste to the center of your CPU's integrated heat spreader (IHS). Use the provided spatula to spread it evenly if desired, or allow the cooler's pressure to spread it.
- Attach Mounting Brackets: Secure the correct mounting brackets for your CPU socket to the cooler's base.
- Mount Cooler: Carefully place the CPU cooler onto the CPU, aligning the mounting holes. Secure the cooler to the standoffs using the provided screws. The design allows for installation without removing the fan.
Image: Easy Installation. This image demonstrates the simplified installation process, allowing the radiator and mounting kit to be installed from above without needing to remove the fan.
Image: 4X Pure Copper Direct Contact Heat Pipes. This close-up shows the four Φ6mm pure copper heat pipes precisely crafted to make direct contact with the CPU core, ensuring rapid heat dissipation.
Image: Compact Design 100% RAM Clearance. This image illustrates the cooler's compact height of 155mm, designed to provide 100% clearance for RAM modules, fitting most motherboards and cases.
2.4. Connect Cables
- PWM Fan Cable: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard.
- ARGB Cable: Connect the 5V ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard. Ensure correct polarity to avoid damage.
3. Operating Instructions
3.1. PWM Fan Control
The 120mm PWM fan automatically adjusts its speed based on CPU temperature, providing an optimal balance between cooling performance and noise levels. You can configure fan curves through your motherboard's BIOS/UEFI settings or dedicated software.
Image: PWM Fan Performance. This image highlights the fan's performance characteristics: Noise ≤26 dB(A), Fan Speed 600-1650RPM ±10%, Airflow 68.2 CFM, and Air Pressure 1.55mm/H2O. The fully enclosed design optimizes airflow for quiet and efficient cooling.
3.2. ARGB Lighting Synchronization
The 5V ARGB lighting can be synchronized with other compatible components in your system. Connect the ARGB cable to your motherboard's 5V ARGB header and use the motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, BIOSTAR RGB Sync) to customize lighting effects.
Image: 5V ARGB SYNC. This image displays the cooler's 5V ARGB lighting capabilities, synchronizing with other system components for a cohesive visual experience. Compatible with major motherboard ARGB software.
4. Maintenance
Regular maintenance ensures optimal performance and longevity of your CPU cooler.
- Dust Cleaning: Periodically clean the fan blades and heatsink fins to prevent dust buildup, which can impede airflow and reduce cooling efficiency. Use compressed air or a soft brush. Ensure the system is powered off before cleaning.
- Thermal Paste Replacement: It is recommended to replace the thermal paste every 1-2 years, or if you remove and re-install the cooler. Clean off old thermal paste thoroughly before applying new paste.
- Fan Inspection: Check the fan for any signs of wear, unusual noises, or obstructions. Ensure the fan cable is securely connected.
5. Troubleshooting
If you encounter issues with your upHere gaming up1KC4 CPU Air Cooler, refer to the following common problems and solutions:
- Fan Not Spinning:
- Check if the 4-pin PWM fan cable is securely connected to the CPU_FAN header on the motherboard.
- Verify fan settings in the motherboard BIOS/UEFI.
- Ensure the system is receiving power.
- High CPU Temperatures:
- Confirm that the cooler is properly seated and making firm contact with the CPU.
- Check if thermal paste was applied correctly and is sufficient. Reapply if necessary.
- Ensure the fan is spinning and not obstructed by cables or dust.
- Verify adequate airflow within your PC case.
- ARGB Lighting Not Working/Synchronizing:
- Ensure the 5V ARGB cable is correctly connected to a 3-pin 5V ARGB header (not a 4-pin 12V RGB header). Incorrect connection can damage the LEDs.
- Check your motherboard's ARGB software settings.
- Verify that the ARGB header on your motherboard is enabled in the BIOS/UEFI.
- Unusual Noise from Fan:
- Inspect the fan for any obstructions (e.g., loose cables).
- Ensure the fan is securely mounted and not vibrating against other components.
- Clean any dust buildup on the fan blades.
6. Technical Specifications
Image: Technical Specifications. This diagram provides key technical details and dimensions of the upHere gaming up1KC4 CPU cooler, including heat pipe count, product dimensions, fan speed, airflow, bearing type, and power connector type.
| Feature | Detail |
|---|---|
| Product Dimensions | 13L x 7.1W x 15.5H cm (5.11L x 2.8W x 6.1H inches) |
| Brand | upHere |
| Power Connector Type | 4-pin PWM |
| Wattage | 1.45 watts |
| Cooling Method | Air |
| Compatible Devices | Desktop Computer |
| Manufacturer | upHere gaming |
| Number of Items | 1 |
| Part Number | up1KC4 IT UG |
| Item Weight | 685 Grams |
| Included Components | Radiator, Accessory Bag, Thermal Paste, Screwdriver, User Manual |
| Heat Pipes | 4 x Φ6mm Pure Copper |
| Fan Speed | 600-1650 RPM ±10% |
| Airflow | 68.2 CFM |
| Noise Level | ≤26 dB(A) |
| Bearing Type | Hydraulic Bearing |
| TDP | 230W |
7. Warranty Information
upHere products are manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official upHere website. Keep your proof of purchase for warranty claims.
8. Customer Support
If you have any questions, require technical assistance, or need further support, please contact upHere customer service through their official website or the retailer where you purchased the product. Provide your product model (up1KC4) and a detailed description of the issue for faster service.
