Upwsma 450W Mini Space Heater Instruction Manual

Important Safety Instructions

Please read and understand all instructions before using this heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not use this heater in bathrooms, laundry areas, or similar indoor locations where water may be present.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Always unplug heater when not in use.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• This heater has an automatic overheat protection system. If the heater overheats, the system will shut off the heater.

Product Overview

The Upwsma 450W Mini Space Heater is a compact, wall-outlet electric heater designed for personal spaces. It features a digital thermostat, timer function, and remote control for convenient operation. Its low wattage makes it suitable for smaller areas without overloading circuits.

Figure 1: Upwsma 450W Mini Space Heater in use.

Features

• Low Wattage: 450W, 110V, 2.9 Amps, 60Hz. Designed for energy efficiency and to prevent circuit overload.
• 180° Rotatable Plug: Allows the heater to fit various wall outlets and positions.
• Digital LED Display: Shows current temperature and timer settings.
• Adjustable Thermostat: Set desired temperature from 60°F to 90°F. The heater will automatically cycle on and off to maintain this temperature.
• Programmable Timer: Set auto power on/off for 1 to 12 hours.
• Remote Control: Conveniently adjust settings from a distance.
• Quiet Operation: Designed to heat rooms up to 100 sq ft quietly.
• Compact Design: Measures 4.3 x 2.8 x 6.5 inches, saving floor space.
• Overheat Protection: Automatic shut-off feature for safety.

Figure 2: Overheat protection feature.

Setup

1. Unpack the Heater: Carefully remove the heater and remote control from the packaging.
2. Choose a Location: Select a suitable wall outlet that is not obstructed by furniture or curtains. Ensure there are no combustible materials within 3 feet (0.9 m) of the heater.
3. Plug In the Heater:
   • Locate the 3-prong plug on the back of the heater.
   • If needed, press the button under the plug to rotate it 180° to align with your wall outlet.
   • Insert the heater directly into a 110V wall outlet. Do not use extension cords or power strips.
4. Remote Control Battery: Insert the required batteries into the remote control (batteries not included).

Figure 3: Rotatable plug for flexible installation.

Operation

Power On/Off

• To turn on the heater, press the Power button on the unit or the remote control. The LED display will illuminate.
• To turn off the heater, press the Power button again.

Setting the Temperature

• With the heater on, use the Temp + or Temp - buttons on the unit or remote to adjust the desired temperature.
• The temperature can be set between 60°F and 90°F.
• The heater will automatically turn on and off to maintain the set temperature.

Setting the Timer (Auto Shut-Off)

• Ensure the heater is turned on.
• Press the Timer button on the unit or remote.
• Each press will cycle through 1 to 12 hours. Select your desired shut-off time.
• The heater will automatically turn off after the set number of hours.

Setting the Timer (Auto Power-On)

• Ensure the heater is turned off.
• Press the Timer button on the unit or remote.
• Each press will cycle through 1 to 12 hours. Select your desired power-on time.
• The heater will automatically turn on after the set number of hours.

Maintenance

Regular maintenance ensures optimal performance and longevity of your heater.

1. Cleaning:
   • Always unplug the heater and allow it to cool completely before cleaning.
   • Use a soft, damp cloth to wipe the exterior surfaces of the heater.
   • Do not use abrasive cleaners or solvents.
   • Never immerse the heater in water or spray water directly onto it.
2. Storage:
   • When not in use, store the heater in a cool, dry location.
   • It is recommended to store it in its original packaging to protect it from dust and damage.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please contact Upwsma customer service. Details can typically be found on the product packaging or the official Upwsma website.

Please retain your purchase receipt as proof of purchase for any warranty claims.