BOBLOV KJ23PRO Camera Clip (CAR Set)

1. Product Overview

The BOBLOV KJ23PRO Camera Clip (CAR Set) is an accessory kit designed to securely mount your BOBLOV KJ23 or KJ23PRO body camera within a vehicle and provide power. This set includes a robust suction cup mount for stable camera positioning and a car charger to ensure continuous power supply during use. It is engineered for ease of installation and reliable performance in a vehicle environment.

This image displays the complete BOBLOV KJ23PRO car set. On the left is the black suction cup mount, designed for securing a camera to a car's windshield or dashboard. On the right is the black car charger, which plugs into a vehicle's cigarette lighter socket to provide power.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1 x BOBLOV Suction Cup Camera Mount
• 1 x Car Charger (Cigarette Lighter Adapter)

3. Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in injury or damage.

• Installation Location: Ensure the mount is installed in a location that does not obstruct the driver's view, interfere with airbags, or impede vehicle controls.
• Secure Mounting: Always ensure the suction cup is firmly attached to a clean, smooth surface before attaching the camera.
• Cable Management: Route power cables safely to avoid interference with driving and to prevent tripping hazards.
• Temperature: Avoid exposing the product to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
• Cleaning: Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive cleaners.
• Disassembly: Do not attempt to disassemble or modify the product. Refer all servicing to qualified personnel.

4. Setup and Installation

Follow these steps to set up and install your BOBLOV KJ23PRO Camera Clip (CAR Set):

1. Prepare the Mounting Surface: Choose a clean, smooth, flat surface on your windshield or dashboard. Ensure the surface is free of dust, dirt, and grease. Clean with a damp cloth and dry thoroughly if necessary.
2. Attach the Suction Cup Mount:
   • Press the suction cup firmly against the chosen surface.
   • Flip the lever on the suction cup base down to create a vacuum seal, securing the mount in place.
   • Gently tug on the mount to ensure it is securely attached before proceeding.
3. Adjust the Mount Angle: Loosen the adjustment knob(s) on the mount to position the camera arm as desired. Tighten the knob(s) firmly once the desired angle is achieved.
4. Attach the Camera: Align your BOBLOV KJ23 or KJ23PRO body camera with the mounting interface on the suction cup arm. Secure the camera firmly to the mount. Ensure it clicks into place or is tightened securely, depending on your camera's attachment mechanism.
5. Connect the Car Charger: Insert the car charger into your vehicle's 12V cigarette lighter socket. Connect the appropriate charging cable (not included with this accessory set) from the car charger to your BOBLOV camera.
6. Cable Management: Route the charging cable away from pedals, steering wheel, and other moving parts to prevent interference and ensure safe driving. Use cable clips if necessary (not included).

5. Operation

Once installed, operating the BOBLOV KJ23PRO Camera Clip (CAR Set) is straightforward:

• Camera Positioning: Loosen the adjustment knob(s) on the mount to fine-tune the camera's angle and orientation as needed. Re-tighten the knob(s) to lock the position.
• Power Supply: The car charger provides continuous power to your camera when the vehicle's ignition is on (or the socket is active). Ensure your camera is connected to the charger for extended recording sessions.
• Removal: To remove the suction cup mount, lift the lever on the suction cup base to release the vacuum seal. Gently pull the tab on the suction cup to fully detach it from the surface.

6. Maintenance

Proper maintenance will extend the life of your BOBLOV KJ23PRO Camera Clip (CAR Set):

• Cleaning the Suction Cup: Periodically clean the suction cup with warm, soapy water to remove any dirt or residue. Rinse thoroughly and allow it to air dry completely before re-attaching. A clean suction cup ensures optimal adhesion.
• General Cleaning: Wipe down the mount and charger with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or strong detergents.
• Storage: When not in use, store the product in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspect for Damage: Regularly inspect the mount and charger for any signs of wear, cracks, or damage. Do not use if damaged.

7. Troubleshooting

If you encounter issues with your BOBLOV KJ23PRO Camera Clip (CAR Set), refer to the following common problems and solutions:

• Suction Cup Not Sticking:
  • Ensure the mounting surface is clean, dry, and smooth.
  • Clean the suction cup with warm, soapy water and let it air dry.
  • Ensure the lever is fully engaged to create a vacuum seal.
  • Avoid mounting on textured or porous surfaces.
• Camera Not Charging via Car Charger:
  • Check if the car charger is fully inserted into the vehicle's 12V socket.
  • Verify that the vehicle's 12V socket is receiving power (e.g., vehicle ignition is on).
  • Ensure the charging cable (from charger to camera) is securely connected at both ends and is not damaged.
  • Test the car charger with another compatible device if possible to rule out charger malfunction.
• Mount Feels Loose:
  • Tighten all adjustment knobs firmly.
  • Re-attach the suction cup if it has lost its seal.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the official BOBLOV website or contact the retailer from whom you purchased the product. Keep your proof of purchase for warranty claims.

BOBLOV Official Website: Visit the BOBLOV Store on Amazon