1. Introduction
Thank you for choosing the OLEVS Women's Stainless Steel Quartz Watch, Model TYG-OS-L2897GJ-JL. This manual provides detailed instructions for setting up, operating, and maintaining your watch to ensure its longevity and optimal performance. This watch features a Japanese Quartz movement, a durable stainless steel band, and is designed for everyday wear with 30-meter water resistance and luminous hands.
Image 1.1: The OLEVS Women's Stainless Steel Quartz Watch, Model TYG-OS-L2897GJ-JL, displayed on a wrist.
2. Setup
2.1 Unboxing and Initial Inspection
Upon receiving your OLEVS watch, carefully remove it from its packaging. Inspect the watch for any visible damage. Ensure all components, including the adjustment tool and extra watch band (if applicable), are present.
2.2 Setting the Time and Date
- Pull out the crown: Gently pull the crown (the small knob on the side of the watch) to the outermost position.
- Set the time: Rotate the crown to move the hour and minute hands to the correct time.
- Set the date (if applicable): If your watch has a date function, pull the crown to the middle position and rotate it to adjust the date. Push the crown back in once set.
- Push in the crown: Once the time is set, push the crown back into its original position to start the watch movement.
Image 2.1: Detailed view of the OLEVS watch dial, showing the main hands and sub-dials.
2.3 Adjusting the Watch Band
Your OLEVS watch comes with a stainless steel bracelet and an adjustment tool. To ensure a comfortable fit, you may need to remove or add links. If you are unsure how to perform this adjustment, it is recommended to seek assistance from a professional jeweler to avoid damaging the band.
- Using the adjustment tool: The included tool can be used to push out pins from the links to remove them.
- Secure the clasp: The watch features a push-button foldover clasp with safety for secure wearing.
3. Operating Your Watch
3.1 Basic Timekeeping
Your OLEVS watch uses a reliable Japanese Quartz movement for accurate timekeeping. The main hands display hours, minutes, and seconds.
3.2 Chronograph Function
The watch features a chronograph function with sub-dials. These sub-dials typically measure elapsed time in seconds, minutes, and a 24-hour format. The pushers on the side of the watch (above and below the crown) control the chronograph:
- Start/Stop: Press the top pusher to start and stop the chronograph.
- Reset: Press the bottom pusher to reset the chronograph hands to zero when it is stopped.
Image 3.1: Detailed view of the watch dial highlighting the embossed flywheel and brilliant zirconia hour markers.
3.3 Luminous Function
The watch hands and hour markers are equipped with a luminous material that absorbs light and glows in the dark, allowing for readability in low-light conditions. Exposure to light will charge the luminous elements.
3.4 Water Resistance
This watch is water-resistant up to 30 meters (3 ATM). This means it is suitable for daily use, such as hand washing, rain, or accidental splashes. It is not suitable for swimming, diving, or showering with hot water, as steam and pressure changes can compromise the seals.
Image 3.2: Feature highlights including 30-meter water resistance and luminous display.
4. Maintenance
4.1 Cleaning Your Watch
To maintain the appearance of your watch, wipe it regularly with a soft, dry cloth. For the stainless steel band, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.
4.2 Water Resistance Care
- Always ensure the crown is fully pushed in before any contact with water.
- Do not operate the crown or pushers when the watch is wet or submerged.
- Avoid exposing the watch to extreme temperature changes, such as going from a hot shower to cold water, as this can affect the seals.
4.3 Battery Replacement
Your watch is powered by a Japanese Quartz movement, which uses a battery. When the battery runs low, the watch may stop or lose accuracy. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance is maintained and to prevent damage to the movement.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch has stopped or is running slow. | Low battery. | Replace the battery (recommended by a professional). |
| Time is incorrect. | Crown not fully pushed in after setting. | Ensure the crown is fully pushed into the normal operating position. |
| Condensation inside the watch. | Water resistance compromised (e.g., crown pulled out underwater, extreme temperature change). | Immediately take the watch to a professional for inspection and repair to prevent further damage. |
| Chronograph hands do not reset to zero. | Requires calibration or service. | Consult a watch technician. |
6. Specifications
| Brand | OLEVS |
| Model Name | TYG-OS-L2897GJ-JL |
| Movement Type | Japanese Quartz |
| Display Type | Analog |
| Case Material | Stainless Steel |
| Band Material | Stainless Steel |
| Band Color | Two Tone (Silver and Gold) |
| Dial Color | Blue |
| Crystal Type | Mineral Glass |
| Case Diameter | 33 Millimeters |
| Case Thickness | 11 Millimeters |
| Band Width | 16 Millimeters |
| Band Length | 7.5 Inches |
| Water Resistance Depth | 30 Meters (3 ATM) |
| Additional Features | Illuminated (Luminous), Chronograph, Diamond Accents |
| Clasp Type | Push Button Foldover Clasp With Safety |
| Included Components | Adjustment Tool, Extra Watch Band |
7. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official OLEVS website. If you purchased your watch through a retailer, please contact their customer service for assistance.
Always retain your proof of purchase for warranty claims.
8. Product Video Demonstration
Video 8.1: An official demonstration video showcasing the OLEVS Women's Watch, Model TYG-OS-L2897GJ-JL, highlighting its design, features, and wearability.
