1. Introduction
This manual provides essential instructions for the safe and effective use of your SALLOOT Trinity 10 IPL Laser Hair Removal Device. Please read this manual thoroughly before first use and retain it for future reference. The SALLOOT Trinity 10 utilizes advanced IPL (Intense Pulsed Light) technology with a sapphire ice-cooling system for comfortable hair removal.
Image 1.1: The SALLOOT Trinity 10 IPL device, accompanied by a razor, protective eyewear, and a smartphone displaying the companion app interface.
2. Safety Information and Warnings
Before using the device, it is crucial to understand the safety guidelines to prevent injury and ensure optimal results.
2.1 General Safety Precautions
- Always wear the provided protective eyewear during operation.
- Do not use the device on damaged skin, moles, tattoos, or permanent makeup.
- Keep the device away from water and do not use it in wet environments.
- Consult a physician before use if you have any underlying medical conditions, especially skin-related issues or are pregnant/breastfeeding.
- Keep out of reach of children.
2.2 Skin Tone and Hair Color Compatibility
IPL technology targets melanin in hair follicles. Therefore, its effectiveness and safety depend on your skin tone and hair color. The device is not suitable for very dark skin tones or very light hair colors (red, light blonde, white/gray) as it may cause skin irritation or be ineffective.
Image 2.1: A chart illustrating compatible skin tones (White, Beige, Light Brown, Brown) and hair colors (Black, Dark Brown, Brown, Light Brown) for IPL treatment. Dark Brown skin and Red, Light Blonde, White/Gray hair are indicated as not applicable.
Note: If your skin tone or hair color falls into the "Not Applicable" category, do not use this device.
3. Product Overview
3.1 Key Features
- Large Sapphire Ice-Cooling Window: Features a 12cm² sapphire contact surface that cools to 37°F (3°C) instantly upon startup, maintaining 59°F (15°C) for up to 35 minutes of continuous use. This provides a comfortable and painless experience, especially for sensitive areas.
- TRIPLE Pulses IPL Technology: Utilizes TRIPLE Pulses IPL and IGBT FlasherPro technology to concentrate energy on the hair follicle, enhancing hair removal efficiency.
- Fast Treatment: Delivers 200 flashes per minute with an auto-gliding flashing mode, allowing for quick sessions (2-8 minutes for full body).
- SMART AI App Integration: Offers personalized treatment plans, reminders, energy level recommendations, and flash settings based on skin tone, hair color, density, and treatment area. Provides real-time AI analysis reports.
- Adjustable Energy Levels and Modes: Features 7 body modes and 5 energy levels, providing 35 sensitive levels for precise and effective hair removal across various body areas.
- High Energy Output: A powerful 25J intensity output effectively targets stubborn hair, including men's armpit and chest hair.
- Ergonomic Design: The 30-degree angled design ensures comfortable handling and optimal fit for all body areas.
- Intuitive LED Touch Screen: For easy operation and settings adjustment.
Image 3.1: The SALLOOT Trinity 10 device with visual cues explaining its Quadruple Sapphire Frost Cube Technology, emphasizing speedy cooling, extreme comfort, long-lasting cooling, and the 12cm² full-screen sapphire window.
Image 3.2: A diagram illustrating the Triple-Pulse IPL technology, showing how the first pulse targets superficial follicles, the second pulse reaches deep follicles, and the third pulse completes hair removal.
4. Setup
4.1 Unpacking and Inspection
- Carefully remove all components from the packaging.
- Inspect the device and accessories for any signs of damage. Do not use if damaged.
- Ensure all items are present: IPL device, power adapter, protective eyewear, and razor.
4.2 Power Connection
Connect the power adapter to the device and then plug it into a suitable electrical outlet. The device is designed for corded operation.
4.3 App Installation (Optional but Recommended)
For personalized treatment plans and tracking, download the SALLOOT Smart AI App from your device's app store. Follow the in-app instructions to pair your device and set up your profile.
Image 4.1: A smartphone screen showing the SALLOOT Smart AI App, which provides personalized treatment plans and guidance.
5. Operation
5.1 Pre-Treatment Preparation
- Shave the Area: Shave the desired treatment area thoroughly before each session. Do not wax, pluck, or use depilatory creams, as IPL requires the hair follicle to be present beneath the skin surface.
- Clean and Dry Skin: Ensure the skin is clean, dry, and free from any lotions, oils, or deodorants.
- Wear Protective Eyewear: Always put on the provided protective eyewear before turning on the device.
5.2 Powering On and Adjusting Settings
- Press and hold the power button to turn on the device. The LED screen will illuminate.
- Use the touch screen or physical buttons (if applicable) to select the desired body mode (e.g., face, legs, bikini) and energy level (1-5). Refer to the app for personalized recommendations.
- The device offers 35 sensitive levels by combining 7 body modes and 5 energy levels.
Image 5.1: A woman demonstrating the use of the IPL device on her leg, with icons indicating various treatable body areas including face, armpit, pubic area, upper body, leg, arm, and fingers/toes.
5.3 Treatment Application
- Place the treatment window firmly against your skin. The device will detect skin contact and the cooling function will activate.
- For larger areas, use the auto-gliding mode: press and hold the flash button and slowly glide the device over the skin, ensuring continuous contact.
- For smaller or curved areas, use the stamping mode: press the flash button for each individual flash, lifting and repositioning the device as needed.
- Ensure each area is treated only once per session to avoid over-exposure.
Image 5.2: A woman using the IPL device on her leg, demonstrating the fast gliding mode with 200 flashes per minute for quick sessions.
5.4 Treatment Schedule
Consistency is key for effective results. The recommended treatment schedule is:
- Weeks 1-2: 3-4 times per week.
- Weeks 3-4: 2-3 times per week.
- After 4 weeks: 2 times per month for long-lasting results.
Image 5.3: A visual guide to the recommended IPL treatment frequency over several weeks, showing hair follicles responding to treatment.
5.5 Post-Treatment Care
- Avoid sun exposure on treated areas for at least 24 hours. Use sunscreen if exposure is unavoidable.
- Moisturize the treated skin with a gentle, non-irritating lotion.
6. Maintenance
6.1 Cleaning the Device
- Ensure the device is powered off and unplugged before cleaning.
- Wipe the treatment window and the device body with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, alcohol, or harsh chemicals, as these can damage the device.
- Allow the device to air dry completely before storing.
6.2 Storage
Store the device in a cool, dry place, away from direct sunlight and moisture. Keep it in its original packaging or a protective case to prevent damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Not properly plugged in; power outlet issue; internal fault. | Ensure the power adapter is securely connected to both the device and a working electrical outlet. Try a different outlet. If the issue persists, contact customer support. |
| No flash emitted. | Poor skin contact; incorrect mode/energy level; device malfunction. | Ensure the treatment window is in full and firm contact with the skin. Check if the selected energy level is appropriate for your skin tone. If the problem continues, restart the device or consult the app for guidance. |
| Skin feels too warm or uncomfortable. | Energy level too high; improper technique; sensitive skin. | Reduce the energy level. Ensure the device is gliding smoothly and not held in one spot for too long. The sapphire cooling should mitigate discomfort; if not, discontinue use and consult a professional. |
| App not connecting to device. | Bluetooth not enabled; app not updated; device not in pairing mode. | Ensure Bluetooth is enabled on your smartphone. Update the app to the latest version. Follow the app's instructions for pairing the device. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | DT015 |
| Technology | IPL (Intense Pulsed Light) with TRIPLE Pulses |
| Cooling Technology | Sapphire Ice-Cooling (37°F / 3°C instant, maintains 59°F / 15°C) |
| Treatment Window Size | 12 cm² |
| Flash Speed | Up to 200 flashes per minute |
| Energy Output | Up to 25J |
| Energy Levels | 5 levels (combined with 7 body modes for 35 sensitive levels) |
| Dimensions | 2.4 x 2 x 7.6 inches |
| Weight | 2.76 Pounds |
| UPC | 642380741267 |
9. Warranty and Support
9.1 Warranty Information
SALLOOT products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official SALLOOT website. Keep your proof of purchase for warranty claims.
9.2 Customer Support
If you encounter any issues or have questions regarding your SALLOOT Trinity 10 device, please contact SALLOOT customer support. Contact information can typically be found on the product packaging, the official website, or within the companion app.
