Flechllary Cascading Twinkle Christmas Tree Lights

Introduction

Thank you for choosing Flechllary Cascading Twinkle Christmas Tree Lights. This manual provides essential information for the safe and efficient use of your new lighting product. Please read these instructions carefully before installation and retain them for future reference.

Important Safety Instructions

• Always unplug the lights from the power source before installation, maintenance, or when not in use.
• Do not connect the lights to another string of lights unless specified by the manufacturer.
• Ensure all connections are secure and protected from moisture, especially for outdoor use.
• Do not operate the lights with damaged cords or bulbs. Inspect regularly for any damage.
• Keep away from heat sources and flammable materials.
• This product is designed for both indoor and outdoor use, featuring an IP65 waterproof rating. However, ensure the power plug is protected from direct water exposure.

Package Contents

• 1 x Set of Flechllary Cascading Twinkle Christmas Tree Lights (400 LED, Warm White)
• 1 x Power Plug with Controller

Specifications

Note: The image below provides a visual summary of some product specifications.

A visual summary of key product specifications, detailing the 400 total LEDs, 16 light strings, 25 LEDs per string, 9.8FT lead wire, and IP44 waterproof rating (note: product specifications state IP65 for the lights themselves).

Setup Instructions

Follow these steps to install your Flechllary Cascading Twinkle Christmas Tree Lights:

1. Prepare the Tree: Ensure your Christmas tree is set up and stable. These lights are suitable for trees between 6 to 8 feet tall.
2. Position the Ring: Locate the mounting ring at the top of the light set. Place this ring securely over the top of your Christmas tree's central branch or trunk.
3. Unfurl the Strings: Gently let the 16 individual light strings hang down from the central ring, distributing them evenly around the tree. Ensure each string is untangled and hangs freely.
4. Connect to Power: Plug the power adapter into a standard electrical outlet.

This image illustrates the design of the cascading twinkle lights, showing the central ring placed at the top of a Christmas tree with 16 light strings extending downwards, creating an even distribution of illumination.

This image highlights the straightforward installation process, showing the light strings draped over a Christmas tree, ready for final arrangement.

A visual guide demonstrating the compatibility of these lights with Christmas trees ranging from 6 feet to 8 feet in height.

This image shows the Flechllary brand logo and visually represents the simple process of adding the cascading lights to a Christmas tree.

Operating Instructions

The Flechllary Cascading Twinkle Christmas Tree Lights are controlled via a button on the power plug.

Lighting Modes

Press the button on the power plug repeatedly to cycle through the 8 available lighting modes. Each press will switch to the next mode. The lights feature a memory function, meaning they will resume the last selected mode when powered on again.

Timer Function

To activate the timer function:

1. Turn on the lights and select your desired lighting mode.
2. Press and hold the button on the power plug for three seconds. A green light on the power plug will indicate that the timer is active.
3. Once activated, the lights will stay on for 6 hours, then automatically turn off for 18 hours, and then light up again for 6 hours, repeating this cycle daily.

This image provides a visual comparison of the lights on a Christmas tree, illustrating their appearance in both daylight and the enhanced warm white illumination they provide in the dark.

A detailed view comparing the appearance of the lights on a Christmas tree, showing their subtle presence during the day and their bright, warm white glow at night.

Maintenance

• Cleaning: Disconnect from power before cleaning. Wipe the lights and wires with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: When not in use, carefully coil the light strings and store them in their original packaging or a suitable container in a cool, dry place away from direct sunlight. This helps prevent tangling and damage.
• Inspection: Periodically inspect the lights, wires, and plug for any signs of wear, cuts, or damage. Discontinue use if any damage is found.

Troubleshooting

• Lights Not Turning On:
  • Ensure the power plug is securely inserted into a working electrical outlet.
  • Check if the power outlet is functional by plugging in another device.
  • Verify that the power button on the plug has been pressed to turn the lights on.
• Some Lights Not Working:
  • Inspect individual LED bulbs for any visible damage. While LEDs are durable, extreme impact can cause issues.
  • Check for any breaks or kinks in the wiring of the affected string.
• Timer Not Activating:
  • Ensure you press and hold the button on the power plug for at least three seconds until the green indicator light illuminates.
  • Confirm the lights are in a desired mode before attempting to set the timer.

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Flechllary customer service through your purchase platform. Keep your purchase receipt as proof of purchase.