1. Introduction
Thank you for choosing the Generic Leten Cannon King Pro Automatic Device. This manual provides essential information for the safe and effective use, maintenance, and care of your new device. Please read this manual thoroughly before first use and retain it for future reference.
Image 1.1: Overview of the Leten Cannon King Pro Automatic Device.
2. Safety Information
Please observe the following safety precautions to prevent injury or damage to the device:
- This device is intended for adult use only.
- Do not immerse the device in water. It is not water-resistant.
- Clean the device thoroughly before and after each use as described in the 'Cleaning and Maintenance' section.
- Discontinue use immediately if you experience any discomfort, irritation, or pain.
- Keep out of reach of children and pets.
- Do not use the device if it appears damaged or malfunctioning.
- Use only the provided USB charging cable.
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
Legal Disclaimer: Statements regarding this product have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
3. Package Contents
Verify that all items are present in your package:
- 1 x Leten Cannon King Pro Automatic Device
- 1 x Removable Soft Sleeve
- 1 x USB Charging Cable
- 1 x User Manual (this document)
4. Product Features
The Leten Cannon King Pro is designed with the following features:
- Automatic Stroking: Provides automated thrusting motion.
- Adjustable Speeds: Offers multiple speed settings for each mode.
- High Stroke Rate: Capable of up to 600 strokes per minute.
- Soft Sleeve: Features a removable, textured soft sleeve for comfort.
- Built-in Voice: Includes integrated audio features.
- USB Charging: Convenient and easy charging via USB.
- 3D Textured Channel: The internal sleeve features a detailed 3D texture.
- Ultra Stroking Distance: Adjustable stroke range from 0.8 inches to 3 inches.
- Fixed Point Stimulation: Designed to target specific areas.
Image 4.1: Key features of the device, including speed, stroke length, and channel design.
Image 4.2: Detailed view of the 3D textured internal channel.
Image 4.3: Illustration of the adjustable stroking distance.
Image 4.4: Diagram illustrating the three fixed points for targeted stimulation.
5. Setup
5.1 Initial Charging
- Before first use, fully charge the device.
- Connect the provided USB charging cable to the charging port on the device.
- Plug the other end of the USB cable into a compatible USB power adapter (not included) or a computer USB port.
- The charging indicator light will illuminate during charging and turn off or change color when fully charged.
- A full charge typically takes 2-3 hours.
5.2 Inserting the Soft Sleeve
- Ensure the device is clean and dry.
- Carefully insert the soft sleeve into the device's opening, ensuring it is seated correctly and securely.
6. Operating Instructions
6.1 Power On/Off
- To power on, press and hold the power button (U) for 2-3 seconds until the device activates.
- To power off, press and hold the power button (U) for 2-3 seconds until the device shuts down.
6.2 Adjusting Modes and Speeds
The device features multiple thrusting modes and adjustable speeds:
- Mode Selection: Press the 'M' button (if present, or refer to specific button icons on your device) to cycle through available thrusting modes.
- Speed Adjustment: Use the '+' and '-' buttons to increase or decrease the stroking speed within the selected mode. There are 5 gears of speed for each mode.
Image 6.1: Controls for adjusting speed and modes.
6.3 Using the Device
- Ensure the device is clean and fully charged.
- Apply a water-based lubricant to the soft sleeve and your body for comfortable use.
- Power on the device and select your desired mode and speed.
- Position yourself comfortably and guide the device as desired.
- Experiment with different settings to find your preferred experience.
- After use, power off the device.
7. Charging
When the battery is low, the indicator light may flash or the device's performance may decrease. Recharge the device using the provided USB cable as described in the 'Initial Charging' section (5.1).
- Do not overcharge the device.
- Avoid charging in wet environments.
8. Cleaning and Maintenance
Proper cleaning and maintenance will extend the life of your device and ensure hygienic use.
8.1 Disassembly for Cleaning
- Ensure the device is powered off.
- Carefully remove the soft sleeve from the main unit.
8.2 Cleaning Instructions
- Soft Sleeve: Wash the soft sleeve with warm water and a mild, toy-safe soap. Rinse thoroughly to remove all soap residue. Allow it to air dry completely before reassembly or storage.
- Main Unit: Wipe the exterior of the main unit with a damp cloth and a mild, toy-safe cleanser. Do not rinse the main unit under running water or immerse it. Ensure no liquid enters the charging port or control panel.
- Do not use alcohol, petroleum-based cleaners, or abrasive materials, as these can damage the device.
8.3 Reassembly
Once both the sleeve and main unit are completely dry, carefully reinsert the soft sleeve into the main unit, ensuring it is properly aligned.
9. Storage
Store the device in a clean, dry, and cool place, away from direct sunlight and extreme temperatures. Keep it out of reach of children and pets. For optimal battery life, charge the device every 3-6 months if not used regularly.
Image 9.1: Device dimensions for storage consideration.
10. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery. | Charge the device fully. |
| Device not charging. | Cable not connected properly; faulty cable/adapter. | Ensure cable is securely connected. Try a different USB port or adapter. |
| Weak or inconsistent stroking. | Low battery; sleeve not properly inserted. | Recharge the device. Re-insert the soft sleeve correctly. |
| Unusual noise during operation. | Sleeve misalignment; internal issue. | Check sleeve alignment. If noise persists, discontinue use and contact support. |
11. Specifications
- Model: Leten King Pro (T5MFR)
- Brand: Generic
- Manufacturer: Leten
- Material: Acrylonitrile Butadiene Styrene (ABS)
- Water Resistance Level: Not Water Resistant
- Charging: USB
- Max Strokes Per Minute: Up to 600
- Stroke Distance: 0.8 - 3 inches
12. Warranty and Support
This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.
For technical support, troubleshooting assistance, or warranty claims, please contact the retailer or manufacturer directly through the contact information provided at the time of purchase.