1. Introduction
Thank you for choosing the SIFSDSFO LED Moving Head DJ Light. This manual provides essential information for the safe and efficient operation of your new stage lighting equipment. Please read this manual thoroughly before installation and use, and retain it for future reference.
2. Safety Information
- Always connect the unit to a grounded power outlet.
- Ensure proper ventilation to prevent overheating. Do not block ventilation openings.
- Avoid direct eye exposure to the light source, as it can cause eye damage.
- Disconnect from power before cleaning or servicing.
- Do not operate the unit if the power cord is damaged or if the unit shows signs of malfunction.
- Installation should be performed by qualified personnel, ensuring secure mounting.
- This product is designed for indoor use only.
3. Package Contents
Verify that all items are present in the package:
- 1 x SIFSDSFO LED Moving Head DJ Light
- 2 x Fixing Brackets
- 1 x Power Cable
- 1 x User Manual
Image: Contents of the product package, showing the LED moving head light, power cable, and two fixing brackets.
4. Product Overview
The SIFSDSFO LED Moving Head DJ Light is a professional stage lighting fixture featuring 19x15W RGBW 4-in-1 LED beads. It offers Beam, Wash, and Zoom functionalities to create diverse lighting effects for various events.
Image: The SIFSDSFO LED Moving Head DJ Light displaying red illumination, positioned on a stage-like setting.
Key Features:
- Light Source: 19x15W RGBW 4-in-1 high brightness LED beads.
- Functions: Beam, Wash, and Zoom (8-55 degrees zoom angle, 15 degrees beam angle).
- Control Modes: DMX512, Auto, Sound Control, Stand Alone, Master/Slave, Strobe.
- Movement: 540° Pan and 180° Tilt for wide coverage.
- Heat Dissipation: Advanced technology for extended lifespan.
Image: The light head displaying a variety of colors and patterns, highlighting its RGBW capabilities.
Image: A visual representation of the light's zoom range, showing its ability to adjust beam width.
5. Setup
5.1 Mounting
The fixture can be installed in various positions (ceiling, wall, floor, desk) using the provided fixing brackets. Ensure the mounting surface is stable and capable of supporting the weight of the fixture. Always use safety cables when suspending the unit.
Image: Detailed dimensions of the light fixture and its two fixing brackets for installation planning.
5.2 Power Connection
Connect the provided power cable to the 'POWER IN' port on the rear of the fixture and then to a suitable grounded power outlet (AC100V-240V, 50/60Hz). For multiple units, use the 'POWER OUT' port for daisy-chaining power, ensuring not to exceed the maximum power load.
5.3 DMX Connection (Optional)
For DMX control, connect a DMX cable from your DMX controller's output to the 'DMX IN' port on the first fixture. For multiple fixtures, daisy-chain DMX cables from the 'DMX OUT' of one fixture to the 'DMX IN' of the next. Ensure the last fixture in the chain has a DMX terminator.
6. Operating Modes
The SIFSDSFO LED Moving Head DJ Light offers several operating modes, selectable via the onboard LCD display and control buttons.
6.1 DMX512 Control
This mode allows precise control over all functions (color, movement, strobe, dimming, zoom) using a DMX controller. Refer to the DMX channel chart in the appendix for detailed channel assignments. The fixture supports 16 or 24 DMX channels.
Video: Demonstration of the SIFSDSFO Moving Head Light's various RGBW beam, wash, and zoom effects under DMX control. This video illustrates the dynamic color changes and movement capabilities of the fixture.
Video: A detailed look at the LED Moving Head Stage Light's 19x15W zoom, beam, and wash functions, showcasing its versatility in creating different lighting atmospheres.
6.2 Auto Mode
In Auto mode, the fixture runs through pre-programmed light shows automatically. Use the control panel to select different auto programs.
6.3 Sound Control Mode
The built-in microphone detects ambient sound, and the light reacts to the beat of the music. Adjust sensitivity via the control panel if available.
6.4 Master/Slave Mode
Connect multiple fixtures via DMX cables. Set one unit as 'Master' and others as 'Slave'. The slave units will synchronize their operation with the master unit, ideal for coordinated light shows without a DMX controller.
6.5 Strobe Mode
This mode provides a flashing light effect. The strobe rate can typically be adjusted from 1-25 times per second.
7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your fixture.
- Cleaning: Periodically clean the lens and exterior with a soft, lint-free cloth. Do not use abrasive cleaners.
- Ventilation: Ensure ventilation openings are clear of dust and debris. The intelligent heat dissipation design relies on unobstructed airflow.
- Inspection: Regularly check power cables, DMX cables, and mounting hardware for any signs of wear or damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable disconnected or faulty; no power from outlet. | Check power cable connection; test outlet with another device; replace faulty cable. |
| No DMX control | Incorrect DMX address; faulty DMX cable; DMX controller issue; no DMX terminator. | Verify DMX address settings; check DMX cable integrity; ensure DMX terminator is used on the last fixture. |
| Light not moving or responding | Incorrect operating mode selected; motor issue. | Ensure correct mode (e.g., DMX, Auto) is selected. If issue persists, contact support. |
| Overheating | Blocked ventilation; prolonged use in high ambient temperature. | Clear all ventilation openings; ensure adequate space around the fixture for airflow. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | SIFSDSFO |
| Model Number | Rotating Multi-Function Compound Lamp |
| Light Source Type | LED |
| Number of Light Sources | 19 |
| Light Source Wattage | 15 Watts (per LED) |
| Maximum Compatible Light Source Wattage | 285 Watts (Total) |
| Color | RGBW 4-in-1 |
| Beam Angle | 15 Degrees |
| Zoom Angle | 8-55 Degrees |
| Pan Movement | 540° |
| Tilt Movement | 180° |
| Control Modes | DMX512, Auto, Sound Control, Stand Alone, Master/Slave, Strobe |
| DMX Channels | 16/24 Channels |
| Power Source | Corded Electric |
| Product Dimensions | 10"L x 10"W x 10"H |
| Item Weight | 17.38 pounds |
| Material | High brightness RGBW lamp beads, Metal finish |
| Certification | CE |
10. Warranty and Support
For warranty information or technical support, please contact SIFSDSFO customer service through your purchase platform. Please have your product model number and purchase date available when contacting support.