COLAMY Swivel Bar Stool Set of 2 Instruction Manual

1. Introduction

Thank you for choosing the COLAMY Swivel Bar Stool Set of 2. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.

These bar stools feature a 360-degree swivel function for enhanced flexibility and convenience in various settings, including bars, kitchens, or home offices. The design incorporates a wooden backrest for a classic aesthetic and modern lines for a contemporary look. The ergonomic design ensures comfort with a curved seat and backrest that support the body's contours, allowing for comfortable seating over extended periods. Each stool is built for stability and can support up to 300 lbs.

2. Safety Information

Always assemble according to the instructions provided. Do not exceed the maximum weight limit of 300 lbs per stool. Be cautious when swiveling to prevent injury. Ensure all bolts are tightened securely before use. Periodically check and re-tighten all connections to maintain stability.

3. What's in the Box

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

Image: Components included in the package. This diagram illustrates the backrest, seat cushion, footrest, four wooden legs, and a bag of screws and tools.

• Backrest (A) x 1
• Seat Cushion (B) x 1
• Footrest (C) x 1
• Wood Legs (D) x 4
• Screw Bag (E, F, G, H, I, J) x 1 (Contains various bolts, washers, and Allen wrench)

4. Setup and Assembly

Assemble the chair on a clean, smooth surface to avoid scratching parts. Do not fully tighten all screws until the chair is fully assembled. Once assembled, tighten all screws 100%.

Assembly Steps:

1. Step 1: Connect Wood Legs and Footrest

   Connect the four Wood Legs (D) with the Footrest (C) using four 2-1/4"x35mm Bolts (F), Spring Washer (G), and Flat Washer (H). Tighten the bolts to approximately 50% using the Allen Wrench (I).

   

   Image: Step 1 of assembly, showing the attachment of the four wooden legs to the circular footrest using specified hardware.

2. Step 2: Attach Seat Cushion to Backrest

   Attach the Seat Cushion (B) to the Backrest (A) using four 1/4"x45mm Bolts (E), Spring Washer (G), and Flat Washer (H). Tighten these bolts using the Allen Wrench (I).

   

   Image: Step 2 of assembly, illustrating how to secure the seat cushion to the backrest frame.

3. Step 3: Attach Finished Base to Seat/Backrest

   Attach the finished base (from Step 1) to the seat/backrest assembly (from Step 2) using four 1/4"x45mm Bolts (E), Spring Washer (G), and Flat Washer (H). Tighten these bolts using the Allen Wrench (I).

   

   Image: Step 3 of assembly, showing the attachment of the leg and footrest assembly to the underside of the seat.

4. Step 4: Final Tightening

   Once all parts are assembled, fully tighten all bolts to 100% to ensure stability and safety.

   

   Image: Step 4 of assembly, indicating the final tightening of all bolts for a complete and stable bar stool.

Assembly Video:

5. Operating Instructions

The COLAMY Swivel Bar Stool is designed for ease of use and comfort.

• Swivel Function: The seat features a 360-degree swivel mechanism. To rotate, simply apply gentle pressure to the seat in the desired direction. Ensure there are no obstructions around the stool before swiveling.
• Weight Capacity: Each bar stool is designed to safely support a maximum weight of 300 lbs (approximately 136 kg). Do not exceed this limit to prevent damage or injury.
• Footrest: Utilize the integrated footrest for added comfort and support while seated.

Image: Key features of the bar stool, including the ergonomic backrest, 360-degree swivel seat, and the sturdy rubber-wood frame with a built-in footrest.

Product Feature Video:

6. Maintenance

Proper care will extend the life and appearance of your bar stools.

• Cleaning: For the upholstered leather surface, wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. For the wood frame, wipe with a dry or slightly damp cloth.
• Spills: Blot spills immediately with a clean, dry cloth. Do not rub, as this can spread the stain.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading and material degradation.
• Regular Checks: Periodically inspect all bolts and connections. Re-tighten if any looseness is detected to ensure continued stability and safety.

7. Troubleshooting

If you encounter any issues with your bar stools, please refer to these common solutions:

• Wobbling Stool: If the stool wobbles, ensure all assembly bolts are fully and evenly tightened. Sometimes, loosening all bolts slightly, sitting on the stool to settle the legs, and then re-tightening them can resolve wobbling.
• Swivel Mechanism Stiffness: If the swivel feels stiff, ensure no debris is obstructing the mechanism. A small amount of silicone-based lubricant can be applied to the swivel plate if necessary, but avoid oil-based lubricants that can attract dust.
• Unusual Noises: Check all connections for tightness. Loose bolts can cause creaking or other noises.

If problems persist, please contact COLAMY customer support.

8. Specifications

Detailed product specifications for the COLAMY Swivel Bar Stool (Model 4840-004).

Image: Product dimension diagram showing the height, width, and depth of the bar stool, along with the recommended counter height range.

9. Warranty and Support

For warranty information or technical support, please contact COLAMY customer service. Details regarding specific warranty periods and coverage can typically be found on the product packaging or the official COLAMY website. Please have your model number (4840-004) and purchase date available when contacting support.

You can visit the COLAMY store for more information: COLAMY Home Store