1. Introduction
Thank you for choosing the RASTAR 1/14 Porsche 911 GT2 RS Clubsport 25 Remote Control Car. This officially licensed replica offers a detailed and engaging remote control experience. This manual provides essential information for the safe and effective operation of your RC car.
Key features include:
- 1:14 scale replica of the Porsche 911 GT2 RS Clubsport 25
- Detailed exterior and interior design
- 4-wheel independent suspension system with front shock absorption
- Working LED headlamps and taillights
- Full functions: forward, reverse, turn left, turn right, stop
- 2.4GHz frequency for multi-user racing without interference
Image: The RASTAR 1/14 Porsche 911 GT2 RS Clubsport 25 RC Car with its remote control.
2. Package Contents
Please verify that all items listed below are included in your package:
- 1 x RASTAR 1/14 Porsche 911 GT2 RS Clubsport 25 RC Car
- 1 x Dual-grip Remote Controller
- 1 x User Manual (this document)
Note: Batteries are not included. You will need 5 x AA batteries for the RC car and 2 x AA batteries for the remote controller.
Image: The RASTAR RC car and remote control as they appear in the product packaging.
3. Setup
3.1 Battery Installation
Ensure the power switches on both the car and the remote controller are in the "OFF" position before installing batteries.
- For the RC Car: Locate the battery compartment on the underside of the car. Open the battery cover using a screwdriver (not included). Insert 5 x AA batteries, ensuring correct polarity (+/-). Close the battery cover and secure it.
- For the Remote Controller: Locate the battery compartment on the back of the remote controller. Open the battery cover. Insert 2 x AA batteries, ensuring correct polarity (+/-). Close the battery cover.
3.2 Pairing the Remote Controller
The 2.4GHz remote control system typically pairs automatically. Follow these steps:
- Turn on the RC car's power switch.
- Turn on the remote controller's power switch.
- The remote controller and car should automatically connect. If not, turn both off and repeat the steps.
4. Operating Instructions
4.1 Basic Controls
The dual-grip remote controller allows for intuitive control of the RC car:
- Forward/Reverse: Use the trigger on the remote to move the car forward or backward.
- Turn Left/Right: Use the steering wheel on the remote to steer the car left or right.
- Stop: Release the trigger to bring the car to a stop.
The car features working LED headlamps and taillights that illuminate when the car is in motion.
Image: The RASTAR RC car being operated with the remote control, highlighting its features like speed and LED lights.
4.2 Multiplayer Operation
The 2.4GHz frequency allows multiple RASTAR RC cars to be operated simultaneously without signal interference. This enables competitive racing or cooperative play with friends.
Image: Two RASTAR RC cars and their respective remote controls, illustrating the 2.4GHz multiplayer functionality.
5. Maintenance
5.1 Cleaning
To maintain the appearance and functionality of your RC car:
- Wipe the car and remote controller with a soft, dry cloth after each use.
- Do not use water or chemical cleaners, as these can damage electronic components.
- Remove any debris (dust, hair, small particles) from the wheels and chassis.
5.2 Battery Care and Storage
Proper battery care extends the life of your product and ensures safety:
- Always remove batteries from both the car and the remote controller when not in use for extended periods.
- Store the RC car and remote controller in a cool, dry place, away from direct sunlight and extreme temperatures.
- Do not mix old and new batteries, or different types of batteries.
6. Troubleshooting
If you encounter issues with your RASTAR RC car, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Car does not respond to remote. | Low batteries in car or remote; car/remote not powered on; pairing issue. | Replace batteries in both car and remote. Ensure both are switched ON. Turn both off and on again to re-establish connection. |
| Car moves slowly or erratically. | Low batteries; obstruction in wheels/gears. | Replace batteries. Check wheels and underside for debris and remove any obstructions. |
| Short control range. | Low batteries; environmental interference. | Replace batteries. Operate in an open area away from other electronic devices that may cause interference. |
7. Specifications
Detailed specifications for the RASTAR 1/14 Porsche 911 GT2 RS Clubsport 25 RC Car:
| Feature | Detail |
|---|---|
| Model Number | 99500 |
| Scale | 1:14 |
| Product Dimensions | 13.3 x 5.5 x 3.5 inches (338 x 147 x 90 mm) |
| Item Weight | 2.42 pounds |
| Frequency | 2.4 GHz |
| Max Speed | Approximately 5 mph (8.2 km/h) |
| Remote Range | Up to 98 feet |
| Car Batteries (Not Included) | 5 x AA |
| Remote Batteries (Not Included) | 2 x AA |
| Recommended Age | 6 years and up |
Image: A diagram illustrating the dimensions of the RASTAR 1/14 Porsche 911 GT2 RS Clubsport 25 RC Car.
8. Safety Information
Please read and adhere to the following safety guidelines to prevent injury or damage:
- This product is recommended for ages 6 and up. Adult supervision is advised for younger users.
- Do not operate the RC car near people, pets, or obstacles that could be damaged.
- Avoid operating the car in wet conditions, on sand, or in areas with loose debris, as this can damage the internal components.
- Never attempt to modify or disassemble the RC car or remote controller.
- Ensure batteries are inserted with correct polarity. Do not recharge non-rechargeable batteries.
- Dispose of used batteries responsibly according to local regulations.
9. Warranty and Support
RASTAR is committed to providing quality products. For any questions, concerns, or support needs regarding your Porsche 911 GT2 RS Clubsport 25 RC Car, please contact RASTAR customer service. Refer to the contact information provided on the product packaging or the official RASTAR website for assistance.
