Introduction
The HAVIT HV-F2011 Laptop Cooling Pad is designed to enhance the performance and longevity of your 12-14.1 inch laptop by providing efficient heat dissipation. It features six quiet fans, six adjustable height settings for ergonomic comfort, dual USB ports for connectivity, and an integrated phone holder for convenience.
Image: The HAVIT HV-F2011 Laptop Cooling Pad shown with a laptop placed on its surface and a smartphone in the integrated holder. The cooling pad features a black mesh surface with blue LED-lit fans visible underneath, and an adjustable stand mechanism.
Setup
- Unpacking: Carefully remove the cooling pad from its packaging. Ensure all components, including the USB power cable, are present.
- Power Connection: Connect one end of the provided USB cable to the cooling pad's input port and the other end to an available USB port on your laptop. The fans will begin to operate, and blue LED lights will illuminate.
- Laptop Placement: Place your 12-14.1 inch laptop securely on the cooling pad's mesh surface. Ensure the laptop is centered for optimal airflow.
- Adjusting Height: The cooling pad offers six adjustable height settings. Lift the cooling pad and adjust the support bar at the bottom to your desired angle. Ensure the anti-slip baffle at the front is flipped up to prevent the laptop from sliding.
- Using the Phone Holder: The integrated phone holder is located on the side of the cooling pad. Simply place your smartphone into the holder for convenient access.
Image: A composite image displaying key features of the cooling pad. From left to right: a rotary switch for fan control, two USB-A ports for connectivity, a foldable non-slip baffle at the front to secure the laptop, and anti-slip pads on the bottom for stability.
Image: A detailed view of the cooling pad's adjustable height mechanism, showing six distinct notches labeled 1 through 6. This allows users to select various ergonomic viewing and typing angles for their laptop.
Operating
- Fan Control: The cooling pad is equipped with a fan speed control switch, typically a rotary dial located on the side. Rotate the dial to turn the fans on/off and adjust their speed to your preference. The blue LED lights indicate fan operation.
- Dual USB Ports: The cooling pad includes two USB ports. One port is used to power the cooling pad from your laptop. The second port can be used to connect other USB devices, such as a mouse, keyboard, or to charge your smartphone, without occupying an additional port on your laptop.
- Optimal Cooling: The six high-speed fans are strategically placed to provide maximum airflow across your laptop's underside, preventing overheating during intensive tasks like gaming or prolonged use.
Image: A close-up view of one of the cooling pad's high-speed fans, illuminated with blue light, demonstrating the powerful airflow generated for effective laptop cooling.
Maintenance
- Cleaning: To maintain optimal performance, regularly clean the cooling pad. Use a soft, dry cloth to wipe down the surface. For dust accumulation in the fan areas, use compressed air to gently clear debris. Ensure the device is disconnected from power before cleaning.
- Storage: When not in use, store the cooling pad in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Liquids: Do not expose the cooling pad to liquids. In case of accidental spills, immediately disconnect power and allow the device to dry completely before reuse.
Troubleshooting
- Fans Not Spinning:
- Ensure the USB cable is securely connected to both the cooling pad and your laptop.
- Verify that your laptop's USB port is functional. Try connecting another USB device to confirm.
- Check the fan speed control switch; ensure it is turned on and adjusted to an active speed setting.
- Insufficient Cooling:
- Ensure your laptop's vents are not obstructed.
- Clean any dust accumulation on the cooling pad's fans and mesh surface.
- Confirm the cooling pad is correctly positioned under your laptop to align with its heat sources.
- Unstable Laptop:
- Ensure the anti-slip baffle at the front of the cooling pad is flipped up to secure the laptop.
- Verify that the laptop size is within the recommended 12-14.1 inch range for optimal fit.
- Place the cooling pad on a flat, stable surface.
Specifications
| Model Number | HV-F2011 |
| Compatible Laptop Size | 12-14.1 inches |
| Number of Fans | 6 |
| Adjustable Heights | 6 settings |
| USB Ports | 2 (1 for power, 1 for additional devices) |
| Material | Metal, Plastic |
| Cooling Method | Air |
| Item Weight | 1.83 pounds |
| Package Dimensions | 13.03 x 9.65 x 1.85 inches |
Image: A diagram illustrating the dimensions of the cooling pad (12.16 inches length, 9.41 inches width, 0.67 inches height at the front lip) and indicating its suitability for 12-14 inch laptops.
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official HAVIT website. You may also contact HAVIT customer service directly for assistance with product inquiries, troubleshooting, or replacement parts.
Online Support: www.havit.com/support (Example link, please verify official support page)
