Voyager A6VATV371C-CHS-STK-1

Voyager Paw Patrol Chase 6V Quad Instruction Manual

Model: A6VATV371C-CHS-STK-1

1. Safety Information

Read all instructions before operating the Voyager Paw Patrol Chase 6V Quad. Failure to follow these safety guidelines may result in serious injury.

Front view of the Paw Patrol Chase 6V Quad, highlighting durable wheels, up to 45 minutes of runtime, 1.5 MPH top speed, and 55 lbs max weight.

Figure 1: Front view of the Paw Patrol Chase 6V Quad, highlighting key features like durable wheels, battery runtime, top speed, and maximum weight capacity.

2. Product Overview

The Voyager Paw Patrol Chase 6V Quad is a battery-powered ride-on toy designed for young children. It features a durable construction and simple controls for an enjoyable and safe riding experience.

Key Features:

Side view of the Paw Patrol Chase 6V Quad, showcasing the blue body, yellow wheels, and Paw Patrol Chase graphics.

Figure 2: Side view of the Paw Patrol Chase 6V Quad, highlighting its design and graphics.

3. Setup

3.1 Assembly

The Paw Patrol Chase 6V Quad requires minimal assembly. Please refer to the separate assembly guide included in the packaging for detailed step-by-step instructions. Ensure all components are securely fastened before proceeding to charging and operation.

3.2 Charging the Battery

Before first use, the battery must be fully charged. The charging port is typically located near the battery compartment. Use only the charger provided with your quad.

  1. Locate the charging port on the quad.
  2. Plug the charger into a standard wall outlet.
  3. Connect the charger's plug to the quad's charging port.
  4. Allow the battery to charge for the recommended time (refer to the separate charging instructions for specific duration). The indicator light on the charger will typically change color (e.g., red to green) when charging is complete.
  5. Disconnect the charger once the battery is fully charged. Do not overcharge.

Note: If the quad is a gift, it is recommended to charge the battery in advance as it may arrive uncharged.

4. Operating Instructions

Operating the Paw Patrol Chase 6V Quad is straightforward. Ensure the child is seated comfortably and understands the basic controls.

  1. Power On: Locate the power switch (often a toggle switch) and turn it to the "ON" position.
  2. Foot Pedal Operation: The quad is controlled by a single foot pedal.
    • To move forward, press the foot pedal down gently.
    • To move backward, press the foot pedal up gently (if applicable, some models may only have forward).
    • To stop, release the foot pedal.
  3. Steering: Use the handlebars to steer the quad left or right.
  4. Supervision: Always ensure an adult is supervising the child during operation.
Top-down view of the Paw Patrol Chase 6V Quad, showing the handlebars and the forward/reverse switch.

Figure 3: Top view of the quad, illustrating the handlebar and control switch for easy operation.

Close-up of the easy-to-control forward and reverse switch on the Paw Patrol Chase 6V Quad.

Figure 4: Detail of the forward/reverse control switch.

5. Maintenance

Regular maintenance ensures the longevity and safe operation of your Paw Patrol Chase 6V Quad.

A child happily riding the Paw Patrol Chase 6V Quad, demonstrating its use in a clean environment.

Figure 5: A child enjoying the quad, emphasizing the importance of proper maintenance for continued fun.

6. Troubleshooting

If you encounter issues with your Paw Patrol Chase 6V Quad, refer to the table below for common problems and solutions.

ProblemPossible CauseSolution
Quad does not moveBattery is low or uncharged.
Power switch is off.
Foot pedal not fully pressed.
Charge the battery fully.
Turn the power switch to "ON".
Ensure the foot pedal is fully depressed.
Quad moves slowlyBattery is low.
Overloaded (exceeds 55 lbs).
Riding on an unsuitable surface.
Recharge the battery.
Ensure rider weight is within limits.
Use on flat, hard surfaces.
Battery not chargingCharger not properly connected.
Faulty charger or battery.
Check all connections.
Contact customer support for replacement.

7. Specifications

FeatureDetail
Product Dimensions25.5 x 15.2 x 17.9 inches
Item Weight12.57 pounds
Model NumberA6VATV371C-CHS-STK-1
Recommended Age24 months - 3 years
Battery6V-1.3AH Rechargeable (1 Nonstandard Battery required)
Max Speed1.25-1.55 MPH
Max Weight Capacity55 LBS
ManufacturerSakar International
Release DateJuly 2, 2024

8. Warranty and Support

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

For technical support, replacement parts, or warranty claims, please contact Voyager customer service:

Related Documents - A6VATV371C-CHS-STK-1

Preview Voyager Universal 5-In-1 Charger & Adapters: User Manual & Guide
Comprehensive user manual for the Voyager Universal 5-In-1 Charger & Adapters, featuring a 10,000mAh power bank, wireless charging, multiple adapter plugs, and USB-C/Lightning ports. Learn about device compatibility, charging speeds, and proper usage.
Preview Voyager Radius Pro Electric Bike User's Manual
Comprehensive user's manual for the Voyager Radius Pro Electric Bike (model BIKE4050RP). Covers safety precautions, assembly, operation, maintenance, specifications, FCC compliance, and warranty information.
Preview Voyager VBSD1A Blind Spot Detection System Manual
This manual provides installation, operation, and troubleshooting information for the Voyager VBSD1A Blind Spot Detection System. It details system limitations, part lists, wiring diagrams, and safety precautions.
Preview Voyager VYCDVD7/VYCDVD9 Portable DVD Player Instruction Manual
This instruction manual provides detailed guidance on operating the Voyager VYCDVD7 and VYCDVD9 portable DVD players, covering setup, features, specifications, and troubleshooting.
Preview Voyager WVSXM43 Digital Wireless Observation Monitor User Manual
User manual for the Voyager WVSXM43 Digital Wireless Observation Monitor, featuring WiSight 2.0 technology. Learn about installation, operation, pairing, button functions, and troubleshooting.
Preview Voyager WVSXC150 Digital Wireless Color CMOS Camera Installation and Specifications
This document provides installation instructions and technical specifications for the Voyager WVSXC150 Digital Wireless Color CMOS Camera, featuring WiSight 2.0 technology. It includes details on mounting, wiring, and product features.