1. Introduction
The Sun Joe iONMAX Storm 24-Volt Cordless LED Hurricane Light is a portable lighting solution designed for various outdoor and indoor applications. This device provides illumination and features integrated USB-A and USB-C charging ports for mobile devices. It operates on a 24-volt lithium-ion battery (sold separately) and is designed with water-resistant properties for enhanced durability.
2. Safety Information
Read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- General Safety: Keep the light away from children. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Eye Safety: Do not stare directly into the LED light. Direct exposure to bright light can cause eye damage.
- Water Resistance: This product is water-resistant, not waterproof. Do not submerge the device in water. Protect it from heavy rain or prolonged exposure to moisture.
- Battery Safety: Use only Sun Joe 24-volt iONMAX lithium-ion batteries with this device. Refer to your battery and charger manuals for specific safety instructions. Ensure correct battery polarity when inserting.
- Charging Safety: Do not attempt to charge non-rechargeable batteries. Do not use the USB charging ports to power devices that exceed the specified output.
3. Package Contents
Ensure all items are present upon unpacking:
- Sun Joe iONMAX Storm 24-Volt Cordless LED Hurricane Light
- Instruction Manual
Note: The 24-volt iONMAX lithium-ion battery and charger are sold separately.
4. Setup
4.1 Battery Installation
To install the 24-volt iONMAX battery (sold separately):
- Ensure the lantern is turned off.
- Locate the battery compartment at the base of the lantern.
- Open the battery compartment cover.
- Align the battery with the compartment and slide it in until it clicks securely into place.
- Close the battery compartment cover firmly.
Image: The Sun Joe iONMAX Storm LED Hurricane Light with its base open, revealing the battery compartment. A battery is partially visible inside.
Image: A pair of hands demonstrating the insertion of a Sun Joe iONMAX battery into the base of the LED Hurricane Light.
5. Operation
5.1 Powering On/Off
To turn the light on or off, locate the power button on the device. Press the button once to turn the light on. Press it again to turn the light off. Multiple presses may cycle through different brightness settings if available (refer to product labeling for specific models).
Image: The Sun Joe iONMAX Storm LED Hurricane Light brightly illuminating a campsite scene with people in the background.
5.2 Using the USB Charging Ports
The lantern is equipped with USB-A and USB-C output ports to charge compatible electronic devices.
- Ensure the lantern has a charged 24-volt iONMAX battery installed.
- Connect your electronic device to either the USB-A or USB-C port on the lantern using an appropriate charging cable.
- The lantern will begin charging your device. Monitor your device's charging indicator.
Image: A close-up view of the Sun Joe iONMAX Storm LED Hurricane Light with a white USB cable connected to a smartphone, demonstrating its charging capability.
Image: The Sun Joe iONMAX Storm LED Hurricane Light shown from the front, with a black USB-C cable connected to a smartphone for charging.
5.3 Placement and Hanging
The lantern can be placed on a flat surface or hung using its integrated hook. Ensure the hanging point is secure and can support the weight of the lantern.
Image: The Sun Joe iONMAX Storm LED Hurricane Light hanging from a tree branch at dusk, providing ambient light.
6. Maintenance
6.1 Cleaning
Wipe the exterior of the lantern with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components. Ensure the device is dry before storage or next use.
6.2 Storage
When not in use, store the lantern in a cool, dry place, away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods to prevent discharge and potential damage.
6.3 Battery Care
Always charge the battery fully before storage and recharge every 3-6 months to maintain optimal performance and lifespan. Do not store batteries in a discharged state.
7. Troubleshooting
- Light does not turn on:
- Ensure the 24-volt iONMAX battery is fully charged and correctly inserted.
- Check if the battery is securely seated in the compartment.
- If the battery is old, it may need replacement.
- USB charging not working:
- Verify the lantern's battery has sufficient charge.
- Ensure the charging cable is properly connected to both the lantern and the device.
- Test with a different USB cable or device to rule out cable or device issues.
- Reduced battery life:
- Battery performance can decrease over time. Ensure the battery is fully charged before each use.
- Operating in extremely cold temperatures can temporarily reduce battery life.
- If the battery is old, consider replacing it.
8. Specifications
| Model Number | 24V-LGT500-LTE |
| Voltage | 24 Volts |
| Wattage | 5 watts |
| Light Source Type | LED (Light Emitting Diode) |
| Brightness | 500 Lumens |
| Battery Life (Max) | 18 Hours (with compatible battery) |
| Water Resistance Level | Water Resistant |
| Mounting Type | Tabletop Mount, Hanging Hook |
| Product Dimensions | 11 x 5 x 10 inches |
| Item Weight | 3.96 pounds (1.8 Kilograms) |
| USB Output | USB Type A, USB Type C |
9. Warranty and Support
This product is covered by a manufacturer's warranty. For detailed warranty information, please refer to the warranty card included with your purchase or visit the official Sun Joe website. For technical support, replacement parts, or service inquiries, please contact Sun Joe customer service.
Contact Information:
Please refer to your product packaging or the official Sun Joe website for the most current customer service contact details.
