Safecourt Kitchen Blender User Manual

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions before operating the blender.
• To protect against risk of electrical shock, do not immerse the motor base in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been dropped or damaged in any manner.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter or touch hot surfaces.
• Keep hands and utensils out of container while blending to prevent the possibility of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
• Blades are sharp. Handle carefully.
• Always operate blender with lid in place.
• Do not blend hot liquids.
• Do not use the appliance for other than intended use.

Product Overview

Familiarize yourself with the components of your Safecourt Kitchen Blender.

Components:

• Motor Base
• 1.5L Glass Jar
• 600ml To-Go Cup
• Lids for Glass Jar and To-Go Cup
• Blade Assemblies (6-blade for glass jar, 4-blade for To-Go cup)

Figure 1: Exploded view showing the motor base, 1.5L glass jar, 600ml To-Go cup, lids, and blade assemblies.

Setup

Unpacking:

1. Carefully remove all components from the packaging.
2. Wash all parts that will come into contact with food (glass jar, To-Go cup, lids, blade assemblies) with warm, soapy water before first use. Rinse thoroughly and dry.
3. Wipe the motor base with a damp cloth. Do not immerse the motor base in water.

Assembly:

Your blender comes with two blending containers: a 1.5L glass jar and a 600ml To-Go cup.

For 1.5L Glass Jar:

1. Place the 6-blade assembly onto the bottom opening of the 1.5L glass jar.
2. Twist the blade assembly clockwise until it is securely tightened.
3. Place the assembled glass jar onto the motor base, ensuring it is seated firmly.
4. Add your ingredients to the jar and secure the lid.

For 600ml To-Go Cup:

1. Fill the 600ml To-Go cup with your desired ingredients.
2. Place the 4-blade assembly onto the open end of the To-Go cup.
3. Twist the blade assembly clockwise until it is securely tightened.
4. Invert the To-Go cup and place it onto the motor base, ensuring it is seated firmly.

Figure 2: The 1.5L glass jar (left) uses a 6-blade assembly for smoother blends, while the 600ml To-Go cup (right) uses a 4-blade assembly for quicker blending.

Operating Instructions

General Blending:

1. Ensure the blender is assembled correctly and the jar/cup is securely placed on the motor base.
2. Plug the blender into a standard electrical outlet.
3. Turn the control dial to your desired speed setting (1 or 2) or use the Pulse function.
4. Once blending is complete, turn the dial to '0' (off) and unplug the appliance.
5. Carefully remove the jar/cup from the motor base.

Speed Settings:

Figure 3: The control dial allows for precise speed adjustment.

• P (Pulse): Provides short bursts of power. Ideal for crushing ice, chopping hard ingredients, or when you need quick control over consistency. Hold the dial at 'P' for desired duration.
• 1 (Gentle): A lower speed setting suitable for soft fruits, vegetables, and liquids. Use for light mixing or creating smooth purees.
• 2 (Strong): A higher speed setting for harder fruits, vegetables, and more demanding blending tasks. Use for tougher ingredients or achieving a very fine consistency.

Blending Tips:

• Always add liquids first, then soft ingredients, and finally harder or frozen ingredients.
• Do not overfill the jar/cup. Ensure ingredients are below the MAX fill line.
• If ingredients stick to the sides, turn off the blender, remove the jar, and gently shake or use a spatula to push ingredients towards the blades. Never use utensils while the blender is running.
• For best results with ice crushing, use the Pulse function.

Cleaning and Maintenance

Proper cleaning ensures the longevity and hygiene of your blender.

Easy Cleaning:

• The blade assemblies detach effortlessly from both the glass pitcher and the To-Go cup.
• All removable parts (glass jar, To-Go cup, lids, blade assemblies) are dishwasher safe.

Manual Cleaning:

1. Unplug the blender from the power outlet.
2. Remove the jar/cup and detach the blade assembly by twisting counter-clockwise.
3. Wash the jar/cup, lid, and blade assembly with warm, soapy water. Use a brush for thorough cleaning around the blades, exercising caution as blades are sharp.
4. Rinse all parts thoroughly and allow them to air dry completely before reassembling or storing.
5. Wipe the motor base with a damp cloth. Never immerse the motor base in water or any other liquid.

Storage:

Store the blender in a dry, clean place. Ensure all parts are dry before storage to prevent mold or mildew.

Troubleshooting

If you encounter issues with your blender, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

Specifications

Warranty and Support

Your Safecourt Kitchen Blender is covered by a standard 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact Safecourt Kitchen customer service. Have your model number (BL500) and proof of purchase ready when contacting support.

We are committed to providing fast and friendly customer service to ensure your satisfaction.