Introduction
This manual provides essential information for the safe and effective use of your DOINOW Cordless Hot Glue Gun G1-NEW. Please read it thoroughly before operation.
The DOINOW hot glue pen features a 6-second preheating speed and automatic glue dispensing. It is designed for various materials including wood, plastic, glass, paper, and stone, suitable for home repairs and creative projects.
Package Contents
Verify that all items listed below are included in your package:
- 1 x DOINOW Cordless Hot Glue Gun (Blue)
- 1 x USB-C Charging Cable
- 1 x User Manual
- 20 x Clear Glue Sticks (1.18 x 7.25 inch)
- 10 x Glitter Colored Glue Sticks (2 x gold, 2 x silver, 2 x blue, 2 x purple, 2 x red)
Image: Contents of the DOINOW Cordless Hot Glue Gun kit, displaying the blue glue gun, USB-C charging cable, user manual, and a variety of clear and colored glitter glue sticks.
Safety Information
- Caution: The nozzle and melted glue are extremely hot. Avoid direct contact with skin to prevent burns.
- Do not touch the nozzle during or immediately after use.
- Keep out of reach of children. Adult supervision is recommended for users under 12.
- Do not use the glue gun while charging.
- Ensure the glue gun is fully charged before first use for optimal performance.
- Do not pull the glue stick from the entrance once inserted, as this can damage the internal mechanism.
- The glue gun features an automatic power-off function after 100 seconds of inactivity for safety and energy efficiency.
Image: Diagram illustrating the internal heating element and nozzle, with a warning to avoid touching the hot nozzle.
Setup
- Charge the Device: Connect the provided USB-C charging cable to the glue gun and a suitable power source. The indicator light will show charging status. Ensure it is fully charged before initial use.
- Insert Glue Stick: Insert a glue stick into the back opening of the glue gun. For the first use, you may need to apply some force to push it into place until it engages with the internal feeding mechanism.
Image: A hand inserting a glue stick into the rear opening of the DOINOW Cordless Hot Glue Gun.
Image: The DOINOW Cordless Hot Glue Gun connected to a USB-C charging cable, indicating its rechargeable nature.
Operating Instructions
- Power On: Press and hold the power button for 3 seconds to turn on the glue gun. The indicator light will flash slowly while preparing to power on or if the battery is low. Once ready for heating, the light will be steady.
- Preheating: The glue gun heats up in approximately 6 seconds. For the very first use of a new glue stick, it may take about one minute for the glue to pass through the gear to the nozzle.
- Dispensing Glue: Press and hold the trigger button to automatically dispense glue. Release the trigger to stop the flow.
- Power Off: Double-click the power button to turn off the glue gun. The device also features an automatic shutdown after 100 seconds of inactivity.
Image: Close-up of the glue gun demonstrating the automatic glue feeding system, showing a glue stick being fed without manual pushing.
Image: Diagram explaining the indicator light states: red for charging, green for charging completed, slow flash for low battery/powering on, steady for ready to heat, and quick flash for charging (cannot be used).
Tips for Use:
- Due to residual heat, a small amount of glue may seep out before the nozzle cools completely. This is normal.
- If the glue feed stops, the glue stick is likely running out. Insert a new stick to resume operation.
- The glue that just comes out is hot. Exercise caution.
Image: Visual guide providing tips for using the glue gun, including handling residual glue, replacing sticks, and initial activation.
Demonstration Video:
Video: A user demonstrating the unboxing, setup, and operation of the DOINOW Cordless Hot Glue Gun, including inserting a glue stick, powering on, and dispensing glue.
Maintenance
- After each use, allow the nozzle to cool completely before storing.
- Clean any excess glue from the nozzle area using a non-abrasive cloth once cooled.
- Store the glue gun in a dry, safe place away from direct sunlight and extreme temperatures.
- Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Glue not dispensing | Glue stick not fully inserted or empty. | Ensure glue stick is pushed in firmly. Replace with a new glue stick if empty. |
| Glue gun not heating up | Low battery or not powered on. | Charge the device fully. Press and hold the power button for 3 seconds to turn on. |
| Indicator light flashing quickly | Device is charging and cannot be used. | Wait for charging to complete (green light). Do not use while charging. |
| Glue seeping from nozzle after use | Residual heat. | This is normal. Allow to cool. Wipe excess glue once cooled. |
Specifications
- Brand: DOINOW
- Model Number: G1-NEW
- Color: Blue Hot Glue Gun
- Product Dimensions: 7.47"L x 1.08"W x 1.18"H
- Power Source: Battery Powered
- Wattage: 25 watts
- Voltage: 3.7 Volts (DC)
- Compatible Materials: Cardboard, Paper, Plastic, Stone, Wood
- Preheating Speed: 6 seconds
- Battery: 2000mAh Lithium Battery
- Runtime: Approximately 40 minutes non-stop on full charge
- Auto Power-Off: After 100 seconds of inactivity
- Charging: USB-C
Warranty and Support
For warranty information or technical support, please refer to the contact details provided in the included user manual or visit the official DOINOW website. Keep your purchase receipt as proof of purchase. The product typically comes with a 30-day return policy for refunds or replacements.
