meross MS200

Download PDF
Contents

meross Smart WiFi Door and Window Sensor Kit User Manual

Model: MS200

Brand: meross

Introduction

The meross Smart WiFi Door and Window Sensor Kit (Model MS200) provides an intelligent solution for monitoring the open/close status of doors, windows, and other entry points in your home. This kit integrates seamlessly with various smart home ecosystems, including Apple HomeKit, Amazon Alexa, and SmartThings, offering real-time alerts, automation capabilities, and historical data tracking for enhanced security and convenience.

Meross Smart WiFi Door and Window Sensor Kit with Hub and Smartphone App

Figure 1: The meross MS200 Smart WiFi Door and Window Sensor Kit, including the main sensor, sub-sensor, and hub, shown with a smartphone displaying the security app interface.

Package Contents

  • 1 x meross Smart WiFi Hub
  • 1 x meross Main Sensor (larger unit)
  • 1 x meross Sub-Sensor (smaller magnetic unit)
  • Mounting Tape (pre-applied or included)
  • User Manual (this document)

Setup and Installation

1. Download the meross App

Before beginning installation, download the official meross app from the Apple App Store or Google Play Store. The app is essential for device setup, configuration, and management.

2. Power On the Smart WiFi Hub

Connect the meross Smart WiFi Hub to a power outlet using the provided power adapter (if applicable, or ensure it's powered on if battery-operated). Wait for the indicator light on the hub to show it's ready for pairing (refer to the hub's specific LED indicator guide for details).

Meross Hub Compatibility Chart

Figure 2: Compatibility chart illustrating the meross HomeKit Hub (MS400) and MS200 sensor working with Apple Home, Alexa, and SmartThings, and the non-HomeKit hub's limitations.

3. Add the Hub to the meross App

  1. Open the meross app and create an account or log in.
  2. Tap the "+" icon to add a new device.
  3. Follow the on-screen instructions to connect the Smart WiFi Hub to your home Wi-Fi network. Ensure your phone is connected to a 2.4GHz Wi-Fi network during setup.

4. Install the Door/Window Sensor

The sensor consists of two parts: a main sensor and a smaller magnetic sub-sensor. They must be installed in close proximity to each other, typically on a door/window frame and the moving part of the door/window, with a gap of no more than 1 cm when closed.

  1. Identify the desired location for installation (e.g., door, window, cabinet, fridge).
  2. Clean the surface thoroughly to ensure proper adhesion of the mounting tape.
  3. Peel the backing from the strong mounting tape on both the main sensor and the sub-sensor.
  4. Attach the main sensor to the fixed frame and the sub-sensor to the moving part (door/window) so that they align perfectly when the door/window is closed. The small alignment mark on both parts should face each other.
  5. Press firmly for several seconds to secure the sensors.
Meross Door and Window Sensor Multi-Scene Use

Figure 3: Examples of the meross sensor's versatile application on a fridge, cabinet, and window, demonstrating its adaptability for various monitoring needs.

5. Add the Sensor to the meross App

Once the hub is connected, you can add the MS200 sensor to it. The meross app will guide you through the process of pairing the sensor with the hub. Ensure the sensor is within range of the hub.

Operating the Sensor

Real-time Monitoring and Alerts

Once installed and paired, the meross app will display the real-time status of your door/window sensor (open or closed). You can configure push notifications to receive instant alerts on your smartphone whenever the sensor's status changes.

Meross App Alert Notification

Figure 4: A smartphone screen displaying a meross app notification indicating the device's current status is "open," demonstrating real-time alerts.

Historical Data

The meross app stores up to 2 years of historical data, allowing you to review past open/close events. This feature is useful for security checking and understanding usage patterns.

Meross App Historical Data View

Figure 5: A screenshot of the meross app showing a detailed log of door and window sensor activity, including open and closed events with timestamps, illustrating the 2-year historical data retention.

Home Automation

Leverage the sensor to create smart home automations. You can set up triggers within the meross app or integrated smart home platforms (HomeKit, Alexa, SmartThings) to control other devices based on the sensor's status. For example, turn on a light when a door opens.

Meross App Automation Example

Figure 6: An illustration of a smart home automation setup where the meross sensor triggers a light to turn on when a door opens, configurable within the meross app.

Apple HomeKit Integration with Meross Sensor

Figure 7: A visual representation of the meross sensor's integration with Apple HomeKit, showing how to set up an automation to turn on a light when the sensor detects an open event. Note: Using this feature in the Apple Home App requires a HomePod or iPad in the home as a Bridge.

Voice Control

For hands-free operation, use voice commands with compatible smart assistants like Siri (via Apple HomeKit). Simply ask Siri to check the status of your door or window sensor.

Maintenance

Battery Replacement

The MS200 sensor is designed for low power consumption, offering up to 2 years of battery life. When the battery is low, you will receive a notification in the meross app. The battery is replaceable.

  1. Gently open the casing of the main sensor unit.
  2. Remove the old battery.
  3. Insert a new battery of the same type (refer to the sensor's internal markings for battery type, typically a CR2032 coin cell).
  4. Close the casing securely.
Meross Sensor Internal Components and Battery

Figure 8: An exploded view of the meross sensor, revealing its internal components and the replaceable battery, highlighting its low power consumption design for extended battery life.

Cleaning

To clean the sensor units, wipe them gently with a dry, soft cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.

Troubleshooting

  • Sensor Not Responding:
    • Check the battery level in the meross app. Replace the battery if low.
    • Ensure the sensor is within range of the Smart WiFi Hub.
    • Verify that the main sensor and sub-sensor are properly aligned and close enough when the door/window is closed.
    • Restart the meross app.
  • Hub Offline:
    • Check the hub's power connection.
    • Ensure your home Wi-Fi network is active and stable.
    • Restart your Wi-Fi router and the meross hub.
  • Cannot Add Device:
    • Ensure your smartphone is connected to a 2.4GHz Wi-Fi network during the setup process.
    • Verify that the hub is in pairing mode (refer to its LED indicator).
    • Reset the hub (refer to the hub's specific instructions for factory reset).
  • Notifications Not Received:
    • Check your phone's notification settings for the meross app to ensure they are enabled.
    • Verify that notification rules are correctly set up within the meross app.

Specifications

FeatureDetail
ModelMS200
ColorWhite
Brandmeross
Power SourceBattery Powered (Sensor), AC Powered (Hub)
Compatible DevicesHome Security System, Smartphone (via meross app, Apple HomeKit, Alexa, SmartThings)
Main Sensor Dimensions (L x W x H)2.24" x 1.22" x 0.59" (57mm x 31mm x 15mm)
Sub-Sensor Dimensions (L x W x H)1.10" x 0.61" x 0.43" (28mm x 15.5mm x 11mm)
Hub Dimensions (L x W x H)2.3" x 1.6" x 0.8" (58.4mm x 40.6mm x 20.3mm)
Battery LifeUp to 2 years (replaceable)
Historical Data RetentionUp to 2 years
Max Sensors per HubUp to 16 meross sensors

Warranty and Support

Warranty Information

Warranty details for the meross Smart WiFi Door and Window Sensor Kit (MS200) are typically provided with the product packaging or can be found on the official meross website. Please retain your proof of purchase for warranty claims.

Customer Support

For further assistance, technical support, or inquiries, please contact meross customer support through the meross app or visit the official meross website. You can also find FAQs and additional resources online.

Official meross Website: www.meross.com

© 2024 meross. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.