Introduction
The LEXIVON Digital Angle Finder Gauge LX-DAF5 is a precision measuring instrument designed for accurately determining angles in various applications. This manual provides instructions for its proper use, maintenance, and care to ensure optimal performance and longevity.
Product Features
- Simplified 4-Button Interface: ON/OFF, ZERO, HOLD/FLIP, REV.
- 360° Measurement Capability: For inside, outside, and reverse angles.
- Extra-Large LCD Display: With 0.05° resolution for clear readings.
- Durable Construction: 5-inch (130mm) anodized aluminum rule with laser-etched imperial (1/32nds) and metric markings.
- Angle Lock Knob: Ergonomic design for securing measurements.
- Accuracy Standard: +/- 0.3°.
- Auto Shut-Off: Activates after 5 minutes of inactivity to conserve battery.
- Power Supply: Uses 2x CR2032 batteries.
- Protection: Includes a heavy-duty zippered pouch for storage and transport.
Setup
1. Battery Installation
- Locate the battery compartment on the back of the digital display unit.
- Use a small screwdriver (often included) to open the battery cover.
- Insert two CR2032 3V batteries, ensuring correct polarity (+/-).
- Replace the battery cover and secure it with the screw.
Note: A spare battery and screwdriver are typically included with the product.
2. Initial Power On
Press the ON/OFF button to power on the device. The LCD display will illuminate and show the current angle.
Operating Instructions
1. Basic Angle Measurement
To measure an angle, open the two arms of the angle finder and place them against the surfaces forming the angle. The angle will be displayed on the LCD screen.
Image: The LEXIVON Digital Angle Finder Gauge positioned to measure an angle on a wooden workpiece.
2. Button Functions
- ON/OFF: Powers the device on or off.
- ZERO: Resets the display to 0.00° at any position. This is useful for setting a relative zero point for comparative measurements.
- HOLD/FLIP:
- Press once to hold the current reading on the display. Press again to release.
- Long press to flip the display reading for easier viewing when the device is inverted.
- REV. (Reverse): Displays the supplementary angle (360° minus the measured angle). This is useful for quickly finding the outside angle when measuring an inside angle, or vice versa.
Image: Detailed view of the control buttons and the Angle Lock Knob on the LEXIVON Digital Angle Finder.
3. Angle Lock Knob
The ergonomic Angle Lock knob allows you to secure the arms of the angle finder at any desired angle. Turn the knob clockwise to tighten and counter-clockwise to loosen.
4. Full 360° Measurement Range
The device can measure angles from 0° to 360°, making it versatile for various tasks including checking table saw blade angles, verifying miter saw accuracy, and aligning shelves.
Image: A visual representation demonstrating the 360-degree measurement capability of the angle finder.
Image: The angle finder being used to set or verify the angle of a miter saw blade.
5. Reading the Display and Scales
The extra-large LCD display provides clear digital readings with a 0.05° resolution. The aluminum rule also features laser-etched imperial (1/32nds) and metric markings for direct length measurements.
Image: A close-up showing the large digital display and the precise laser-etched measurement scales on the rule.
6. Official Product Video (Demonstration of similar LEXIVON tool)
This video demonstrates the use of a similar LEXIVON angle measurement tool (LX-230 Miter Saw Protractor). While not the exact LX-DAF5 model, it illustrates practical applications of angle finding in woodworking and construction.
Video: Demonstration of the LEXIVON Miter Saw Protractor (LX-230), showcasing its use for accurate angle measurements in a workshop setting.
Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the display or markings.
- Battery Replacement: Replace batteries when the display becomes dim or does not turn on. Follow the battery installation steps in the Setup section.
- Storage: Store the angle finder in its heavy-duty zippered pouch when not in use to protect it from dust, moisture, and physical damage.
Image: The durable zippered pouch designed for protecting the LEXIVON Digital Angle Finder.
Troubleshooting
- Display is blank or dim:
- Check battery installation and polarity.
- Replace batteries with new CR2032 3V cells.
- Inaccurate readings:
- Ensure the arms are fully closed and press the ZERO button to recalibrate.
- Verify that the surfaces being measured are clean and free of debris.
- Ensure the Angle Lock knob is tightened sufficiently to prevent movement during measurement.
- Buttons unresponsive:
- Power off the device and then power it back on.
- Check battery level and replace if necessary.
Specifications
| Brand | LEXIVON |
| Model Number | LX-DAF5 |
| Material | Aluminium |
| Rule Length | 5 inches / 130 mm |
| Measurement Range | 0° to 360° |
| Resolution | 0.05° |
| Accuracy | +/- 0.3° |
| Power Supply | 2 x CR2032 3V Batteries |
| Auto Shut-Off | 5 minutes |
| Item Dimensions (L x W x H) | 19.7 x 6.3 x 3.9 cm |
| Item Weight | 0.17 Kilograms |
| Included Components | Heavy-duty Case |
| Country Of Origin | Taiwan |
Warranty Information
Specific warranty details for the LEXIVON Digital Angle Finder Gauge LX-DAF5 are not provided in the available product information. Please refer to the product packaging or the official LEXIVON website for the most current warranty policy.
Customer Support
For further assistance, technical support, or inquiries regarding your LEXIVON Digital Angle Finder Gauge LX-DAF5, please visit the official LEXIVON website or contact their customer service department. Contact information is typically available on the product packaging or the manufacturer's website.
You can also visit the LEXIVON Store on Amazon for more product information and support resources.