onerbl AC Power Cord Replacement for LG HDTVs User Manual

Introduction

This manual provides essential information for the safe and effective use of your onerbl AC Power Cord. This replacement power cord is designed to provide reliable power to compatible LG HDTV, TV, LCD, and LED models. Please read this manual thoroughly before installation and use, and retain it for future reference.

Important Safety Information

Always follow basic safety precautions when using electrical products to reduce the risk of fire, electric shock, and injury to persons.

Ensure the power cord is fully inserted into both the device and the wall outlet.
Do not use the power cord if it is damaged, frayed, or has exposed wires.
Do not overload electrical outlets.
Keep the power cord away from water, heat sources, and sharp objects.
Do not attempt to modify or repair the power cord. Contact qualified personnel for assistance.
Unplug the power cord from the outlet when not in use for extended periods or during electrical storms.

Compatibility

This onerbl AC Power Cord is compatible with various LG HDTV, TV, LCD, and LED models, including but not limited to:

LG 47LM6200UE
LG 47LS4500UD
LG 47LS4600UA
LG 47LS5700UA
LG 55G2UG
LG 55LM4600
LG 55LM4600UC
LG 55LM4700UE
LG 55LM5800

Please verify your device's power input requirements and connector type before use to ensure proper compatibility.

Setup and Installation

Follow these steps to properly install your new AC power cord:

Step 1: Power Off and Unplug
Ensure your LG HDTV is completely powered off and unplugged from the wall outlet. This prevents electrical shock and potential damage to your device.
Step 2: Locate Power Input
Identify the power input port on the back of your LG HDTV. This is typically a three-prong or two-prong receptacle.
Step 3: Connect Power Cord to TV
Carefully insert the female end of the onerbl AC Power Cord into the power input port on your LG HDTV. Ensure it is firmly seated.
Step 4: Connect Power Cord to Outlet
Plug the male end of the onerbl AC Power Cord into a standard, grounded wall outlet. Avoid using extension cords or power strips if possible. If necessary, use only surge protectors or extension cords rated for the appropriate power requirements.
Step 5: Power On
Once the cord is securely connected, you may power on your LG HDTV.

onerbl AC Power Cord connected to a device

Image: The onerbl AC Power Cord, showing its standard connector ends. This image illustrates the typical appearance of the power cord for connection to your device and wall outlet.

Operating Instructions

The onerbl AC Power Cord functions as a direct replacement for your original power cable. Once properly installed, it provides the necessary electrical power for your compatible LG HDTV to operate. There are no specific operating controls on the power cord itself.

Ensure the power cord is not kinked or bent sharply, which can damage internal wiring.
Avoid placing heavy objects on the power cord.
Periodically check the cord for any signs of wear or damage.

Care and Maintenance

Proper care and maintenance will extend the life of your onerbl AC Power Cord.

Cleaning: Disconnect the power cord from both the wall outlet and the device before cleaning. Wipe the cord with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Storage: When not in use, store the power cord in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly wrapping the cord, which can cause internal wire damage.
Inspection: Regularly inspect the power cord for any signs of damage, such as cuts, fraying, or discoloration. If any damage is observed, discontinue use immediately and replace the cord.

Troubleshooting

If you encounter issues with your onerbl AC Power Cord, refer to the following troubleshooting guide:

Problem	Possible Cause	Solution
TV does not power on after connecting the new cord.	Cord not fully inserted. Wall outlet not functioning. TV power issue (not cord related). Cord is faulty.	Ensure both ends of the cord are securely connected. Test the wall outlet with another device. Consult your TV's user manual for troubleshooting power issues. If other solutions fail, the cord may be faulty and require replacement.
Cord feels hot during use.	Overload on the circuit. Damaged cord.	Unplug immediately. Check for other devices on the same circuit. Discontinue use and replace the cord.

If the problem persists after attempting these solutions, please contact customer support.

Specifications

Feature	Detail
Brand	onerbl
Model Number	1
Type	AC Power Cord Replacement
Compatibility	LG HDTV, TV, LCD, LED models (e.g., 47LM6200UE, 55LM4600)
Material	High-quality materials (as per manufacturer description)
Condition	Brand New

Warranty Information

Specific warranty details are typically provided by the seller or manufacturer at the time of purchase. Please refer to your purchase documentation or contact the seller directly for information regarding warranty coverage, duration, and terms for this onerbl AC Power Cord.

Generally, products are expected to be free from defects in materials and workmanship under normal use. If you experience issues that you believe are covered under warranty, retain your proof of purchase and contact the seller for assistance.

Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller or manufacturer directly.

Seller: LGM DYstore

Manufacturer: Shenzhen Waweis Technology Co., Ltd

Please have your product model number (1) and purchase details ready when contacting support.

onerbl 1