Jimmy BX7 Pro Max Graphene Mattress Vacuum Cleaner Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the safe and effective use of your Jimmy BX7 Pro Max Graphene Mattress Vacuum Cleaner. This corded handheld vacuum is designed for deep cleaning mattresses, sofas, and other fabric surfaces, featuring advanced technologies such as graphene heating, UV-C sterilization, and a smart dust sensor.

Please read this manual thoroughly before operating the device and retain it for future reference.

2. Included Components

Jimmy BX7 Pro Max Mattress Vacuum Cleaner Unit
HEPA Filter (one pre-installed, additional may be included)
Power Cord (attached)
Cleaning Brush with Blade (for maintenance)

3. Setup

3.1. Unboxing and Initial Inspection

Carefully remove all components from the packaging. Inspect the vacuum cleaner and accessories for any signs of damage. If any damage is found, do not use the device and contact customer support.

3.2. Filter Installation

Ensure the HEPA filter is correctly installed in the dust cup. The filter is typically pre-installed. Refer to the 'Maintenance' section for instructions on how to access and reinstall the filter.

3.3. Power Connection

Plug the power cord into a standard electrical outlet. The device is corded and requires continuous power during operation.

Figure 1: Jimmy BX7 Pro Max Mattress Vacuum Cleaner. This image shows the overall design of the vacuum cleaner, highlighting its compact, handheld form factor with the dust cup and brush head visible.

4. Operating Instructions

4.1. Powering On/Off

Press and hold the power button for 2 seconds to start the vacuum cleaner. Press the power button again to turn it off.

4.2. Cleaning Modes and Features

Graphene Heating Technology: The vacuum heats up to 149°F (65°C) in approximately 5 seconds. This heat penetrates deep into the fabric to aid in dust removal and dehumidification.
UV-C Sterilization: The integrated UV lamp emits 254nm UV light for deep sterilization of surfaces. The UV lamp activates automatically when the vacuum is in contact with a surface and turns off when lifted.
High-Frequency Tapping: The device utilizes high-frequency tapping to dislodge dust and debris embedded deep within fabrics, enhancing cleaning effectiveness.
Smart Dust Sensor: A built-in intelligent dust sensor identifies dust levels on fabrics and displays the cleaning status via an LED indicator. A red light indicates a dirty area, while a blue light indicates a clean area.

LED screen and Smart Dust Sensor — Figure 2: LED Screen and Smart Dust Sensor. This image illustrates the LED display on the vacuum, showing how it indicates dust levels (red for dirty, blue for clean) and cleaning modes.

Figure 3: Graphene Heating Technology. This image depicts the vacuum's heating element in action, showing heat penetrating a mattress surface.

Figure 4: UV-C Sterilization. This image shows the UV light function of the vacuum, illustrating its use for deep sterilization on fabric surfaces.

4.3. Usage on Different Surfaces

The Jimmy BX7 Pro Max is professional for beds, couches, pillows, cribs, and other flat fabric surfaces. It is not suitable for long velvet, long fluff carpets, or hard floors.

4.4. Instructional Video

Video 1: JIMMY UV mattress vacuum using instruction. This video demonstrates the proper way to use the Jimmy UV mattress vacuum, including activating its various functions.

5. Maintenance

5.1. Cleaning the Dust Cup and Filter

To maintain optimal performance, clean the dust cup and HEPA filter after each use. Hold the dust cup with one hand and open the dust cup cover buckle with the other hand. Take out the filter and filter sponge, and clean them with water. Ensure they are completely dry before reassembling.

5.2. Cleaning the Brush Roll

Periodically check the brush roll for entangled hair or debris. Use the provided cleaning brush with a blade to cut and remove any wrapped hair. The brush roll is easily accessible for cleaning.

6. Troubleshooting

If you encounter any issues with your Jimmy BX7 Pro Max, refer to the following common problems and solutions:

6.1. Brush Roller Not Working

If the brush roller is not functioning, ensure it is free from obstructions like tangled hair or fabric. Check if it is correctly installed. Refer to the video below for detailed instructions.

Video 2: Anti-mite Vacuum Trouble Shooting Brush roller not working. This video provides guidance on troubleshooting a non-functional brush roller.

6.2. Power Cord Loose

If the power cord feels loose or is not providing consistent power, ensure it is securely plugged into both the device and the wall outlet. Avoid pulling the cord forcefully. Refer to the video below for detailed instructions.

Video 3: JIMMY Anti-mite Vacuum Trouble Shooting Power cord loose. This video demonstrates how to address issues with a loose power cord connection.

6.3. Weak Suction, Abnormal Noise, Overheating, or Auto Shut-off

These issues can often be resolved by checking the dust cup and filter for clogs, ensuring the brush roll is clear, and verifying proper assembly. If the device overheats, allow it to cool down before resuming use. Refer to the video below for detailed instructions.

Video 4: Weak suction, Abnormal noise, Over heating, Auto turn off. This video addresses common operational problems and provides solutions.

7. Specifications

Brand	Jimmy
Model Name	BX7 Pro Max
Special Feature	Corded
Filter Type	HEPA Filter
Wattage	550 watts
Suction Power	16Kpa
Capacity	1.1 Pounds (Dust Cup)
Product Dimensions	16.14"L x 12.99"W x 9.84"H
Item Weight	6.49 pounds
Power Cord Length	16.4 ft
UV Light Wavelength	254nm
Heating Temperature	Up to 149°F (65°C)
Indoor/Outdoor Usage	Indoor

8. Warranty and Support

The product comes with a 1-year warranty for quality problems, offering a replacement machine or refund. If issues arise after 1 year, please contact customer support for parts replacement or repair services.

9. Safety Warnings

Always disconnect the power plug before cleaning or performing maintenance.
Do not use the UV lamp to irradiate people or pets directly.
Do not use the electric corded mattress vacuum anywhere with water.
Ensure the brush head, dust cup, and filter are installed correctly before use.
Not suitable for long velvet, long fluff carpets, or hard floors.
The mattress vacuum cleaner is designed for beds, mattresses, pillows, cribs, and other flat fabric surfaces.

	JIMMY BX7 Pro Max Anti-mite Vacuum Cleaner User Guide User guide for the JIMMY BX7 Pro Max anti-mite vacuum cleaner, providing instructions on product installation, usage, cleaning, maintenance, troubleshooting, and specifications.
	JIMMY BX7 Pro Anti-mite Vacuum Cleaner User Guide Comprehensive user guide for the JIMMY BX7 Pro Anti-mite Vacuum Cleaner, covering installation, operation, maintenance, troubleshooting, specifications, and warranty information.
	JIMMY H10 Pro Cordless Vacuum Cleaner Instruction Manual Comprehensive instruction manual for the JIMMY H10 Pro cordless vacuum cleaner, covering assembly, operation, maintenance, troubleshooting, and safety guidelines for efficient home cleaning.
	JIMMY JV53 Lite Cordless Vacuum Cleaner: Instruction Manual & Guide Official instruction manual for the JIMMY JV53 Lite cordless vacuum cleaner. Learn about assembly, operation, charging, maintenance, safety, and troubleshooting.
	Jimmy JV35 Anti-mite Vacuum Cleaner User Guide User guide for the Jimmy JV35 anti-mite vacuum cleaner, detailing installation, usage, cleaning, maintenance, troubleshooting, and specifications. Features UV light technology for effective mite removal.
	JIMMY HW9 Pro Max Cordless Vacuum & Washer Instruction Manual User guide and instruction manual for the JIMMY HW9 Pro Max Cordless Vacuum & Washer, detailing operation, assembly, safety, and maintenance for effective floor cleaning.

Jimmy BX7 Pro Max