Haroar Remote Control Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the operation and maintenance of your Haroar remote control, designed for use with various Panasonic air conditioner models. Please read this manual carefully before using the remote control to ensure proper function and to maximize the lifespan of your device.

Compatible Panasonic Air Conditioner Models:

• CS-YE9MKE
• CS-YE12MKV-7
• CS-YE12MKX
• CS-YE12PKY
• CS-YE12MKE
• CS-YE18MKE
• CS-YE18PKY

2. Remote Control Overview

The image below illustrates the layout of the Haroar remote control and its various buttons. Familiarize yourself with these controls for efficient operation.

Figure 1: Haroar Remote Control Layout. The remote features a rectangular LCD screen at the top, displaying current settings like mode (AUTO, HEAT, COOL, DRY, OFF) and fan/swing indicators. Below the screen are various control buttons. The top row includes an orange ON/OFF button on the left and a MODE button on the right. The next row has TEMP▼ and TEMP▲ buttons for temperature adjustment. Below these are FAN and SWING buttons. The row after features TURBO and QUIET buttons. Towards the bottom, there are two grey buttons labeled with a clock icon and 'A' and 'B' for timer settings, along with SELECT and SET CANCEL buttons. At the very bottom, there are small indicators and text for SET, AC.RESET, and RC.RESET.

Button Functions:

• ON/OFF: Powers the air conditioner on or off.
• MODE: Cycles through operating modes: AUTO, HEAT, COOL, DRY, FAN.
• TEMP▲ / TEMP▼: Adjusts the temperature setting up or down.
• FAN: Controls the fan speed (e.g., Low, Medium, High, Auto).
• SWING: Activates or deactivates the air deflector swing function.
• TURBO: Engages maximum cooling/heating for rapid temperature change.
• QUIET: Reduces fan speed and compressor noise for quieter operation.
• TIMER (A / B): Used to set specific on/off times.
• SELECT: Used in conjunction with timer settings to confirm selections.
• SET CANCEL: Used to set or cancel timer programs.
• AC.RESET: Resets the air conditioner unit (refer to AC manual for specific function).
• RC.RESET: Resets the remote control to factory defaults.

3. Setup

3.1 Battery Installation

1. Locate the battery compartment cover on the back of the remote control.
2. Slide the cover downwards or press the latch to open it.
3. Insert two new AAA batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
4. Close the battery compartment cover securely.

Note: Always replace both batteries at the same time. Do not mix old and new batteries, or different types of batteries. Remove batteries if the remote will not be used for an extended period.

4. Operating Instructions

Ensure the remote control is pointed directly at the air conditioner's receiver when operating.

4.1 Basic Operation

• Power On/Off: Press the ON/OFF button once to turn the unit on or off.
• Selecting Mode: Press the MODE button repeatedly to cycle through AUTO, HEAT, COOL, DRY, and FAN modes. The selected mode will be displayed on the remote's LCD screen.
• Adjusting Temperature: Use the TEMP▲ button to increase the temperature and the TEMP▼ button to decrease it.
• Fan Speed Control: Press the FAN button to adjust the fan speed. Options typically include Auto, Low, Medium, and High.
• Swing Function: Press the SWING button to activate or deactivate the automatic louver swing, which distributes air evenly.

4.2 Advanced Functions

• TURBO Mode: Press the TURBO button for rapid cooling or heating. The unit will operate at maximum power until the desired temperature is reached or the button is pressed again.
• QUIET Mode: Press the QUIET button to reduce the operating noise of the air conditioner. This mode typically lowers the fan speed.
• Timer Setting:
  1. Press the TIMER (A) or TIMER (B) button to initiate timer setup.
  2. Use TEMP▲ / TEMP▼ to adjust the desired ON or OFF time.
  3. Press SELECT to confirm the time.
  4. Press SET CANCEL to activate the timer. To cancel, press SET CANCEL again.
• Reset Functions:
  • AC.RESET: This button is typically used to reset the air conditioner unit itself. Consult your air conditioner's specific manual for details on its function.
  • RC.RESET: This button resets the remote control to its default settings. Use a thin, pointed object (like a paperclip) to press this recessed button if available.

5. Maintenance

5.1 Cleaning the Remote Control

To clean the remote control, wipe it gently with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the remote's surface or internal components.

5.2 Battery Care

• Replace batteries when the remote's display becomes dim or the remote stops responding consistently.
• Always dispose of used batteries responsibly according to local regulations.
• If the remote will not be used for an extended period (e.g., over a month), remove the batteries to prevent leakage and potential damage.

6. Troubleshooting

7. Specifications

• Brand: Haroar
• Model: Haroar (Universal Remote)
• Compatible AC Models: CS-YE9MKE, CS-YE12MKV-7, CS-YE12MKX, CS-YE12PKY, CS-YE12MKE, CS-YE18MKE, CS-YE18PKY
• Dimensions: Approximately 1 x 1 x 1 cm (as per product data, actual remote dimensions may vary slightly)
• Weight: Approximately 50 g
• Power Source: 2 x AAA Batteries (not included)

Note: Specifications are subject to change without prior notice for product improvement.

8. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. As this is a replacement remote control, warranty terms may vary.

For technical support or further assistance, please contact the seller or the manufacturer directly. Ensure you have your purchase details and product model information ready.