SMALLRIG RF10C

SMALLRIG RF10C RGB LED Photography Flashlight User Manual

Model: RF10C

Comprehensive guide for operating and maintaining your SMALLRIG RF10C LED Photography Flashlight.

1. Introduction

The SMALLRIG RF10C RGB LED Photography Flashlight is a versatile and compact lighting tool designed for content creators and photographers. It features 4-color LED beads (sunset orange, blue, white, and red) and comes with 20 patterned light filters, allowing for a wide range of atmospheric projection effects. Its ergonomic design and long-lasting battery make it an ideal companion for various shooting scenarios.

SMALLRIG RF10C RGB LED Photography Flashlight with various gobo patterns shown below

Figure 1: The SMALLRIG RF10C RGB LED Photography Flashlight with examples of patterned light filters.

2. What's in the Box

Please verify that all items listed below are included in your package:

  • RF 10C Portable Focusable LED Video Light x 1
  • Filters x 20
  • Silicone Bracket for filters x 1
  • Carry Bag x1
  • USB-C Charging Cable x 1
Contents of the SMALLRIG RF10C package including the light, filters, silicone bracket, carry bag, and USB-C cable.

Figure 2: All components included with the RF10C LED Flashlight.

3. Setup

3.1 Charging the Device

Before first use, fully charge the RF10C using the provided USB-C charging cable. The built-in 7500mAh lithium battery provides approximately 3 hours of continuous full-power lighting once fully charged.

Illustration of the internal 7500mAh battery of the SMALLRIG RF10C, highlighting its extended battery life.

Figure 3: The RF10C features a built-in 7500mAh battery for extended use.

3.2 Attaching Filters and Gobos

The RF10C comes with 20 patterned light filters (gobos) and a silicone bracket. Insert the desired filter into the silicone bracket, then attach the bracket to the front of the flashlight. This allows for various atmospheric projection effects.

3.3 Mounting Options

The RF10C is equipped with three 1/4"-20 threaded holes on its side and rear. These versatile mounting points allow for flexible positioning on tripods, light stands, or other compatible accessories, catering to diverse shooting scenarios.

Three different mounting configurations for the SMALLRIG RF10C, showcasing its 1/4 inch-20 threaded holes.

Figure 4: Multiple mounting options provide flexibility for various setups.

4. Operating Instructions

4.1 Power On/Off and Basic Controls

To power on the device, rotate the control button half a turn within one second. To turn off, press and hold the button for 2 seconds. The control button also allows for color changes and brightness adjustments.

  • Short Press: Change color (Sunset Orange, Blue, White, Red).
  • Press and Hold (2s): Turn off.
  • Rotate: Adjust brightness.
Close-up of the single control button on the SMALLRIG RF10C, illustrating its functions for power, color, and brightness.

Figure 5: Simple one-button control for intuitive operation.

4.2 Adjusting Beam Zoom

The RF10C features a convex mirror with a front push-pull design for precise beam control. Extend the front to narrow the beam (zoom in) or retract it to diffuse the beam (zoom out). The adjustable zoom angle is approximately 10° to 60°.

Diagram showing the push-pull mechanism of the SMALLRIG RF10C to adjust the light beam from narrow to diffuse.

Figure 6: Adjusting the beam zoom for desired light spread.

4.3 Utilizing Patterned Light Filters (Gobos)

With 20 included light filters, you can project various patterns to create unique ambient lighting or background effects. Experiment with different patterns and colors to enhance your photography and content creation.

Image showcasing various gobo patterns projected by the SMALLRIG RF10C, enriching creative possibilities.

Figure 7: Examples of creative patterns achievable with the included gobos.

4.4 Color Fill Light Functionality

The RF10C offers four distinct colors: sunset orange, blue, white, and red. These colors can be used as fill lights to add mood, highlight subjects, or create dynamic visual effects in your photos and videos.

Four quadrants showing a model illuminated by different colors (orange, blue, white, red) from the SMALLRIG RF10C.

Figure 8: Switch between four colors for maximum impact on your visuals.

5. Key Features

  • Photography Flashlight: Features 4-color LED beads (sunset orange, blue, white, and red), with a maximum power of 10W, CRI Ra≥96, TLCI≥98, 1,570lux@0.5m/ 5600K, to meet various shooting requirements. Equipped with 20 light filters, it supports a variety of atmospheric projection effects, for more creative possibilities.
  • Compact and Ergonomic Design: With a mere 4.3cm (1.7in) diameter, the handle offers a comfortable and ergonomic grip. Crafted from aluminum alloy in a sleek dark color scheme, this compact and lightweight video light is both stylish and practical, fitting easily into any photography backpack.
  • Long-lasting Battery Life: Equipped with a built-in 27.75Wh lithium battery that supports USB-C charging, this light provides approximately 3 hours of continuous full-power lighting, ensuring uninterrupted support for your shooting needs.
  • Versatile Mounting Options: Featuring 3 1/4"-20 threaded holes on the side and rear, this light enables versatile lighting configurations, catering to a variety of shooting scenarios.
  • Precise Beam Control: The convex mirror's front push-pull design facilitates beam size adjustment, providing the capability for precise zooming in a smaller range (adjustable zoom angle approximately 10°-60°). The zoom adjustment offers smooth control and excellent damping for seamless aperture range adjustments.
The SMALLRIG RF10C flashlight placed inside a camera bag, demonstrating its compact size and portability.

Figure 9: The compact design makes the RF10C ideal for "Art On-the-Go".

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the flashlight. For the lens and LED surface, use a lens cleaning cloth and solution designed for optical surfaces. Avoid abrasive materials or harsh chemicals.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use, to maintain battery health. Store in a cool, dry place.
  • Storage: When not in use for extended periods, store the RF10C in its provided carry bag to protect it from dust and physical damage.

7. Troubleshooting

  • Device Not Turning On:
    • Ensure the battery is charged. Connect to a USB-C power source and check the charging indicator.
    • Verify the power-on procedure: rotate the button half a turn within one second.
  • Light Not Changing Color/Brightness:
    • Ensure the device is powered on.
    • For color change, short press the control button.
    • For brightness adjustment, rotate the control button.
  • Projected Pattern is Blurry:
    • Adjust the beam zoom by pushing or pulling the front of the flashlight to achieve desired focus.
    • Ensure the filter is correctly seated in the silicone bracket and the bracket is properly attached.

8. Specifications

AttributeDetail
Product Dimensions6.06 x 2 x 1.93 inches
Item Weight14.9 ounces
Item Model NumberRF10C
Batteries1 AA batteries required (included)
Battery Life3 Hours (at full power)
Compatible Mountings1/4"-20 thread
Camera Flash TypeExternal
Included ComponentsRF 10C Portable Focusable LED Video Light x 1, Filters x 20, Carry Bag x1, Silicone Bracket for filters x 1, USB-C Charging Cable x 1
Manufacturersmallrig
BrandSMALLRIG

9. Warranty and Support

SMALLRIG offers a 1-year after-sales service for the RF10C RGB LED Photography Flashlight. For any inquiries or support needs, please contact SMALLRIG customer service. Inquiries are typically responded to within 24 hours.

For further assistance, please visit the official SMALLRIG website or contact their support team directly.

© 2025 SMALLRIG. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.