1. Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Quntis 10M 400LED Solar Powered Icicle Curtain Lights. Please read this manual carefully before use to ensure proper functionality and longevity of your product.
Image 1.1: Quntis 10M 400LED Icicle Curtain Lights illuminating a house exterior.
2. Package Contents
Please verify that all items are present in your package:
- 1 x Quntis 10M 400LED Icicle Curtain Lights String
- 1 x Solar Panel with Ground Stake
- 1 x Remote Control
- 1 x USB Charging Cable (30cm)
- Mounting Accessories (e.g., wall screws, clips, cable ties)
- 1 x Lithium Ion Battery (pre-installed in solar panel)
Image 2.1: Overview of included components: solar panel, remote control, USB cable, and mounting hardware.
3. Specifications
| Model Number | 0027-QX-WW |
| Total Length | 15 meters (10M light string + 5M lead wire) |
| LED Quantity | 400 LEDs |
| Icicle Drops | 80 drops (strands of 30cm, 70cm, 40cm, 60cm) |
| Light Color | Warm White (2100K) |
| Power Source | Solar Powered, USB Charging |
| Battery | 1 x Lithium Ion (included) |
| Waterproof Rating | IP44 |
| Lifespan | Up to 50,000 hours |
| Special Features | 8 Lighting Modes, Remote Control, Dimmable, Timer Function |
Image 3.1: Diagram illustrating the 10-meter light string, 5-meter lead wire, and varying icicle drop lengths.
4. Setup and Installation
4.1 Solar Panel Placement
For optimal charging, place the solar panel in a location that receives 4-6 hours of direct sunlight daily. The solar panel can be installed in three ways:
- Grounded: Use the provided ground stake to firmly insert the solar panel into soft ground.
- Wall-mounted: Use screws to attach the solar panel bracket to a wall.
- Clipped: Use the clip accessory to attach the solar panel to an edge, such as a fence or railing.
Image 4.1: Solar panel installation options: ground stake, wall mount, and clip attachment.
4.2 Light String Installation
Unroll the icicle curtain lights carefully. Use the included cable ties to hang the light string along eaves, windows, balconies, or other desired locations. Ensure the solar panel is connected to the light string via the 5-meter lead wire.
4.3 Initial Test (Daytime)
To test the lights during the day:
- Fully cover the solar panel to simulate darkness.
- Press the "ON/OFF" button on the back of the solar panel. The lights should illuminate.
- If the lights do not turn on, ensure the solar panel has been sufficiently charged or use the USB charging option.
Image 4.2: Visual guide for daytime testing and initial installation of the solar panel.
5. Operating Instructions
The Quntis Icicle Curtain Lights feature both solar charging and USB charging capabilities. They automatically turn on at dusk and off at dawn when sufficient solar charge is available.
5.1 Charging Modes
- Solar Charging: The solar panel charges the internal battery during the day (4-6 hours of direct sunlight recommended).
- USB Charging: For cloudy days or insufficient sunlight, use the provided 30cm USB charging cable to charge the solar panel via a USB power source (e.g., wall adapter, power bank, computer).
Image 5.1: Illustration of automatic solar charging during the day and the USB-C charging option.
5.2 Remote Control Functions
Ensure the power button on the solar panel is in the "ON" position before using the remote control. The remote has a range of approximately 5 meters.
- ON/OFF: Turns the lights on or off.
- Mode Selection (1-8): Cycles through 8 lighting modes.
- Brightness Adjustment (25%, 50%, 75%, 100%): Adjusts the light intensity.
- Timer Function (3H, 5H, 8H): Sets the lights to stay on for 3, 5, or 8 hours, then automatically turn off for 18 hours.
Image 5.2: Remote control interface displaying the 8 available lighting modes.
5.3 Lighting Modes
Select from the following 8 lighting modes using the remote control:
- Combination
- In Waves
- Sequential
- Slo-glo
- Chasing/Flash
- Slow Fade
- Twinkle/Flash
- Steady On
Image 5.3: Depiction of the 8 distinct lighting modes, from combination to steady on.
5.4 Brightness Adjustment
Adjust the brightness to your preference using the remote control. Available levels are 25%, 50%, 75%, and 100%.
Image 5.4: Visual demonstration of the four brightness levels: 25%, 50%, 75%, and 100%.
5.5 Timer Function
Activate the timer function via the remote control. Once set, the lights will automatically turn on for the selected duration (3, 5, or 8 hours) and then turn off for 18 hours, repeating the cycle daily.
Image 5.5: Remote control timer options, allowing the lights to operate for 3, 5, or 8 hours.
6. Maintenance
6.1 Cleaning
Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures maximum charging efficiency. Avoid using abrasive cleaners or harsh chemicals.
6.2 Weather Resistance
The Quntis Icicle Curtain Lights are IP44 waterproof, meaning they are protected against splashing water from any direction. They are designed to withstand rain, snow, and wind, making them suitable for outdoor use in various weather conditions.
Image 6.1: Visual confirmation of the lights' IP44 waterproof rating, demonstrating resistance to rain, snow, and wind.
7. Troubleshooting
- Lights do not turn on at night:
- Ensure the solar panel is placed in direct sunlight for at least 4-6 hours daily.
- Verify the power button on the solar panel is in the "ON" position.
- Check if the solar panel is covered by dirt, leaves, or snow. Clean if necessary.
- Use the USB charging cable to fully charge the battery if solar charging is insufficient.
- Remote control is not working:
- Ensure the solar panel's power button is ON.
- Check the battery in the remote control and replace if needed.
- Ensure you are within the 5-meter operating range of the remote.
- Lights are dim or only stay on for a short period:
- The battery may not be fully charged. Ensure the solar panel receives adequate sunlight or use USB charging.
- Reduce the brightness setting using the remote control to extend operating time.
8. Safety Information
- Do not attempt to disassemble or modify the product.
- Keep the solar panel and lights away from open flames or extreme heat sources.
- Ensure all connections are secure during installation.
- Do not immerse the solar panel or light string in water, despite its waterproof rating.
- Keep out of reach of children.
Image 8.1: The lights are designed to be safe to touch, even during operation.
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Quntis customer service through your retailer's platform. Please have your model number (0027-QX-WW) and purchase details ready when contacting support.
