ROBOTIME 3D Flower Puzzle Lilac Instruction Manual

1. Introduction

Welcome to the world of ROBOTIME 3D Wooden Puzzles! This instruction manual provides detailed guidance for assembling your Lilac 3D Flower Puzzle (Model: RBT-TW-P). This exquisite adult craft kit allows you to create a beautiful artificial wooden flower decoration, perfect for home decor or as a thoughtful gift. Enjoy the relaxing and rewarding process of bringing your wooden flower to life.

The ROBOTIME Lilac puzzle features pre-cut and numbered wooden pieces, designed for easy assembly without the need for glue or additional tools. It's an engaging activity that enhances logical thinking, fine motor skills, and spatial awareness.

2. Safety Information

WARNING: This product is NOT FOR CHILDREN UNDER 3 YEARS due to small parts which may pose a choking hazard. Adult supervision is recommended for users under the manufacturer's recommended age of 8 years.

Keep all small parts away from young children and pets.
Handle wooden pieces carefully to avoid splinters.
Do not ingest any parts of the puzzle.
Store the kit in a dry place away from direct sunlight and excessive humidity to prevent warping or damage to the wood.

3. What's in the Box

Your ROBOTIME 3D Flower Puzzle Lilac kit includes the following components:

Pre-cut and numbered wooden sheets (154 pieces)
Instruction manual (this document)
Additional paper components for decoration (if applicable)

Contents of the ROBOTIME 3D Flower Puzzle Lilac kit, showing pre-cut wooden sheets, instructions, and small accessories. — Figure 3.1: All components included in the ROBOTIME Lilac 3D Flower Puzzle kit.

4. Setup

Before you begin assembly, ensure you have a clean, well-lit, and flat workspace. No additional tools or glue are required for this puzzle.

Unpack Components: Carefully remove all wooden sheets and the instruction manual from the packaging.
Identify Pieces: Familiarize yourself with the numbered pieces on each wooden sheet. The instructions will refer to these numbers.
Prepare Workspace: Lay out the wooden sheets and instructions on your clean surface. It's helpful to have a small container for any small detached pieces.

5. Assembly Instructions

Follow these step-by-step instructions to assemble your ROBOTIME Lilac 3D Flower Puzzle. The estimated assembly time is approximately 30 minutes.

5.1. Detaching Pieces

Gently push out the numbered pieces from their wooden sheets. If a piece is difficult to remove, use a small, blunt object (like the back of a spoon or a plastic card) to carefully push it out. Avoid forcing pieces, as this may cause damage.

A person's hands carefully detaching wooden puzzle pieces from a sheet, with other pieces and instructions laid out on a table. — Figure 5.1: Gently detaching wooden pieces from the sheet.

5.2. Assembling the Base (Pot)

Begin by assembling the pot that will hold your Lilac flower. Refer to the numbered diagrams in your printed manual for specific piece identification and connection points.

Close-up of hands assembling the wooden pot base for the flower puzzle, showing interlocking pieces. — Figure 5.2: Assembling the decorative wooden pot.

5.3. Constructing the Stem and Leaves

Next, assemble the main stem and attach the various leaf pieces. Pay attention to the orientation of each piece as shown in the diagrams.

Hands assembling the green stem and leaves of the wooden flower puzzle, showing the interlocking design. — Figure 5.3: Building the stem and attaching leaves.

5.4. Assembling the Lilac Blooms

This is the most intricate part, where you assemble the numerous small lilac flower pieces and attach them to the stem. Take your time and ensure each piece is securely fitted.

Close-up of hands assembling the purple lilac flower head, showing the intricate layering of small wooden petals. — Figure 5.4: Assembling the intricate lilac flower head.

5.5. Final Assembly and Adjustments

Once the stem and blooms are complete, insert the assembled flower into the pot. The design allows for adjustable flower angles and stem height, enabling you to customize the display to your preference.

The completed ROBOTIME Lilac 3D flower puzzle, showing its adjustable stem height and flower angle, ready for display. — Figure 5.5: The completed Lilac flower with adjustable features.

5.6. Adding Decorative Elements

The kit may include small decorative elements like butterflies or bees, and a small "for you" card. These can be attached to enhance the aesthetic appeal of your finished flower.

The finished ROBOTIME Lilac 3D flower puzzle with a small 'for you' card and a butterfly decoration, alongside the kit's packaging. — Figure 5.6: The completed Lilac flower with decorative card.

5.7. Official Assembly Videos

For visual guidance, please refer to the official assembly videos provided by ROBOTIME. These videos offer detailed step-by-step instructions that can complement the written manual.

Video 5.7.1: ROBOTIME 3D Wooden Puzzle Artificial Flower Bouquet. This video demonstrates the assembly process for a similar flower bouquet puzzle, providing helpful visual cues for your Lilac puzzle.

Video 5.7.2: ROBOTIME 3D Wooden Puzzle DIY Model Bloom Craft Kit. This video showcases the general assembly of a wooden bloom craft kit, which can assist in understanding the interlocking mechanisms.

Video 5.7.3: ROBOTIME 3D Puzzle Wooden Flower Craft Kit. Another helpful video demonstrating the assembly of a wooden flower craft kit, providing additional visual support for complex steps.

6. Operating Your Product (Display and Adjustment)

Your ROBOTIME 3D Flower Puzzle is designed as a decorative item. Once assembled, you can adjust its appearance to suit your display needs.

Adjusting Flower Angle: Gently pivot the flower head to achieve your desired angle.
Adjusting Stem Height: The stem may have interlocking points that allow for slight height adjustments. Refer to the assembly diagrams for specific adjustment mechanisms.
Placement: Place your finished Lilac puzzle on any flat, stable surface such as a table, shelf, or desk.

7. Maintenance and Care

To ensure the longevity and beauty of your wooden flower puzzle, follow these simple maintenance guidelines:

Cleaning: Dust regularly with a soft, dry cloth. Avoid using abrasive cleaners or wet cloths, as moisture can damage the wood.
Storage: If disassembling for storage, keep all pieces organized and in a dry, cool place away from direct sunlight to prevent warping or fading.
Handling: Handle the assembled puzzle with care to avoid accidental breakage of delicate pieces.

8. Troubleshooting

If you encounter any issues during assembly or with your finished product, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Pieces do not fit together easily.	Incorrect orientation or slight manufacturing variance.	Double-check the piece numbers and orientation against the manual's diagrams. Gently try to fit the pieces without excessive force. If a piece is too tight, a very light sanding with fine-grit sandpaper on the connecting tab might help, but proceed with extreme caution.
A piece broke during detachment or assembly.	Excessive force or delicate nature of the piece.	If the break is clean, a small amount of wood glue can be used to repair it. Allow ample drying time. If a critical piece is severely damaged, contact ROBOTIME customer support for possible replacement parts.
Finished product is unstable or wobbly.	Pieces not fully seated or incorrect assembly.	Review the assembly steps, particularly for the base and main stem. Ensure all interlocking tabs are fully inserted into their slots.

9. Specifications

Feature	Detail
Brand	ROBOTIME
Model Name	Lilac
Item Model Number	RBT-TW-P
Material	Wood
Number of Pieces	154
Product Dimensions (L x W x H)	5.12 x 17.32 x 10.24 inches
Item Weight	3.98 ounces
Recommended Age	8 years and up
Theme	Plant, Romance, Floral

10. Warranty and Support

ROBOTIME stands behind the quality of its products. For any manufacturing defects or missing parts, please contact ROBOTIME customer support. While specific warranty details are not provided in this manual, general support for product issues is available.

For further assistance, visit the official ROBOTIME store or contact their customer service through the platform where you purchased the product.

ROBOTIME Official Store: Visit Store

	Cathy's Flower House DG104: Miniature DIY Assembly Guide Comprehensive assembly instructions for the Cathy's Flower House DG104 miniature DIY craft kit by Robotime. This guide provides detailed steps, tips, and part lists to help you build your own charming flower house.
	ROKR AMK52 Secret Garden DIY Mechanical Music Box Assembly Instructions Comprehensive assembly instructions for the ROKR AMK52 Secret Garden DIY Mechanical Music Box by Robotime. This guide provides a detailed walkthrough of the assembly process, including a parts list, step-by-step instructions, and helpful tips for a successful build.
	Olivia's Kitchen Assembly Instructions - ROBOTIME WCF09 Detailed assembly instructions for the ROBOTIME Olivia's Kitchen play set (Model WCF09). Includes parts list, step-by-step guidance, and safety warnings for building this wooden toy kitchen.
	Robotime EC Declaration of Conformity - Miniature House Kits Official EC Declaration of Conformity for Robotime Technology (Suzhou) Co., Ltd.'s range of DIY miniature house kits, including models like Mind-Find Bookstore, Holiday Party Time, and more, compliant with harmonized standards.
	Robotime EC Declaration of Conformity - Product List and Compliance Official EC Declaration of Conformity from Robotime Technology (Suzhou) CO., LTD, listing compliant wooden model kits, their product details, and applicable harmonized standards and test reports.
	ROKR TW021 Lilac R 3D Wooden Flower Model Assembly Instructions Detailed assembly instructions for the ROKR TW021 Lilac R 3D wooden flower model kit. Learn how to build your own beautiful wooden lilac flower with clear, step-by-step guidance from Robotime.

ROBOTIME RBT-TW-P